Samsung The Frame Pro vs IFFALCON U85X

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a decent result for a lifestyle model. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, the brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to local dim whole strips, does not handle them very well. It happens that small elements are overly darkened, which weakens the effect, or conversely – they become heavily brightened, but at the cost of losing black depth in that part of the image. This can be compared to light halos reminiscent of a laser beam spreading in dense fog – an effect that is visible and bright but at the same time not very natural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colours are saturated, and the reproduction of the DCI-P3 palette reaches over 92%. Generally, movies or series watched in HDR on The Frame Pro present a rich colour palette, even if contrast and the performance of the lighting algorithms can sometimes draw our attention away.

iFFALCON U85 handles HDR in a rather dual manner – on one hand, it can surprise with a solid peak brightness of around 650 nits, which places it significantly above average in this price segment. This is particularly evident in bright, full-screen scenes. Examples from movies like Life of Pi or the final test sequences from The Meg prove that the television can maintain the power and essence of the HDR effect when the entire panel needs to “ignite,” providing truly satisfying experiences. However, problems arise in high-contrast scenes, where smaller, bright details appear on the screen; the dimming algorithms prioritise black depth so much that they can crush the brightness of small bright points down to just 100 nits, drastically lowering the image dynamics and depriving us of the real “bite” we expect from HDR standards. However, the question of colours remains a sweetener, as thanks to the use of the PFS phosphor filter (marketed as QLED by the manufacturer), they look very good, achieving nearly 94% coverage of the DCI-P3 colour gamut, which allows for a rich and vivid image in most content.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the most commonly viewed materials – The Frame Pro performed really well. The white balance and gamma were almost perfectly set, making the image look natural and cohesive. Yes, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed up" character, but in everyday use, it didn't hinder the viewing experience too much. For HDR content, the situation was similar regarding the white balance. It was at a good level, however, the biggest issue turned out to be managing brightness. The EOTF curve was set in such a way that in many scenes the image appeared blown out, and the brightest areas lost detail and resulted in uniform patches of light. This severely affected realism and made colours appear very oversharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their TVs, so we opted for calibration and its results can be seen below.

We tested the factory colours in the iFFALCON U85X model in “Film” mode, which is definitely the most accurate among all available settings, although it is still far from perfect. The main issue that catches the eye in both SDR and HDR content is the improper white balance – an excess of blue and red contributes to a slight purple tint in the image, detracting from the naturalness of the film scenes. An even greater challenge is how the television manages its brightness. Analysing the gamma chart for SDR signal, we noticed significant instability: instead of adhering to the standard value of 2.4, the device oscillates around 2.2, then suddenly makes an unnatural jump to around 3.0. In practice, this leads to confusing effects – large, bright surfaces on the screen appear too dark, while smaller elements are unnecessarily brightened. A similar characteristic can be found in the EOTF curve, which makes the image unpredictable and loses its cinematic authenticity.

After calibration, the SDR mode looks almost perfect. We managed to eliminate the overly intense red saturation that previously gave the image a somewhat excessively warm character. The colours became more balanced, which translated into a natural and pleasant viewing experience for everyday content – from television to movies and series from streaming services or materials on YouTube. In HDR mode, the EOTF curve required the most work, as the factory settings caused excessive clipping of the entire image. The calibration significantly helped to "tame" this issue – the image stopped being overexposed, and details in the bright areas became more visible. Of course, the limits are set by the design of the television itself, as edge lighting reveals its limitations, and even the smallest elements of light can still appear overly bright or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is much more enjoyable to watch, and it is definitely worth considering if you want to make the most of the television's capabilities.

After professional calibration of the movie mode, we must admit that the effect is more than satisfactory – the iFFALCON U85X undergoes a true transformation here. Colour errors in SDR content have dropped to a level below 2, making them practically undetectable to the human eye. We managed to set the white balance almost perfectly, and brightness management (gamma) has become almost exemplary. As a result, with standard quality materials, the television simply looks perfect and it's hard to fault it.

In the case of HDR signal, the situation has also improved significantly, although here the nature of the device is a bit more noticeable. Colour errors have been reduced to around 3, which is an outstanding result in this price range. It's worth taking a look at the EOTF chart (available on the right side of the screen in filters: 4K HDR, gamma / EOTF) to see what is not immediately apparent regarding brightness management by the U85. Though the reference line looks decent, in actual film scenes the television still interprets the signal “in its own way” due to very aggressive local dimming zone algorithms. Does that disqualify this model for watching HDR content? Absolutely not. It’s simply a typical issue with nearly every Mini-LED that has to balance high brightness with the attempt to maintain deep blacks. One just needs to be aware of these technical limitations, which are unavoidable in this segment.

Although in 4K HDR materials the fluidity of tonal transitions in the ChooseTV Pro is not a problem at all, naturally with weaker signal quality – such as with television, HD materials, or older Full HD films – imperfections may occur. Therefore, it's crucial how the television handles these limitations thanks to the image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a visible yet not overdone way. However, it's important to remember that Samsung has a tendency to be aggressive – even at the lowest level of this feature, it can "eat" film grain. So, it's wise to use it with caution and adjust the settings according to the material being watched.

The upscaling itself is of a high standard. The ChooseTV Pro effectively boosts older materials to a native 4K resolution, maintaining good sharpness and clarity. Movies and series in lower quality simply look better here. However, it's worth mentioning a minor downside – typical for many Samsung televisions. With very old sources in poor quality, you may notice some cropping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's good to know that it may occur.

When it comes to scaling images to 4K resolution, the iFFALCON U85X performs solidly. The device effectively boosts low-quality signals, making even older materials look clean and clear on the 4K panel. At extremely low resolutions, such as 480p, you can notice slightly jagged edges (especially on thin lines), but let’s be honest – this is a scenario you'll only encounter while watching very old recordings, so in everyday use, it’s not a real issue.

On the other hand, the digital processing aimed at smoothing tonal transitions performs significantly worse. Although the menu features a function called “Gradual Smoothing”, its effectiveness is at least debatable. In practice, it does not effectively eliminate banding (colour stepping) and, worse yet, can cause more harm than good. This filter can be too aggressive where it shouldn’t be, artificially smoothing out details that shouldn’t be touched, such as the natural texture of the face or the fine details of skin texture. Instead of improving quality, this function can give the image an unnatural, “plastic” look, so it’s best to use it with caution or, preferably: leave it turned off.

The fluidity of movement in The Frame Pro is not only due to the panel itself, which operates at a refresh rate of up to 144 Hz, but also the image processor and motion smoothing system. It is thanks to this that we can adjust the way movies or sports broadcasts are displayed to our own preferences. Available are sliders for blur reduction and motion judder reduction – the first function enhances the sharpness of fast movements, while the second helps to soften the effect of the "jumping" image during camera pans. Everyone can choose between a cinematic character of motion and a smoother, more "television" style.

Unlike budget constructions that can resemble a slideshow in dynamic sports scenes, the iFFALCON U85X is a heavyweight player equipped with a panel featuring a native refresh rate of 144Hz. It's worth remembering that in the realm of movies, series, or sports, we'll predominantly operate at 120Hz due to the specifics of image enhancement systems. Such a fast panel is excellent news for gamers and sports fans, as it opens the door to advanced motion settings that simply aren't available in cheaper 60Hz models.

Everything is managed from the menu “Motion Clarity”, where instead of using ready-made, often overly aggressive modes, we strongly recommend a custom configuration based on two sliders. The most important of these, Flicker Reduction, is responsible for fluidity in films – here, it's best to aim for a value around 4, which helps maintain the natural, cinematic character of motion without falling into the artificial “soap opera effect.” Meanwhile, the first slider, Motion Blur Reduction, is key to success in sports broadcasts. In this case, it's worth going all out and setting it to maximum, ensuring that the image remains sharp during fast-paced action on the field, while annoying ghosting is eliminated.

Samsung The Frame Pro doesn’t pretend to be just a “living room” TV; gamers will also find something for themselves here. The manufacturer has ensured a full package of gaming features: we have support for variable refresh rate (VRR), auto low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on-the-fly – from refresh rates to active image processing modes. Are there downsides? Yes, The Frame Pro doesn’t support Dolby Vision in game mode, but it’s hard to consider this a serious issue – most gamers use HDR10 anyway... so the HGIG mode. Exactly. The biggest surprise was the latest software update. Samsung... completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user cannot enable settings designed with consoles in mind. This is a step backwards, which may disappoint more aware gamers hoping for full compliance with HGiG guidelines. We can only hope that this mistake will be quickly fixed.

An interesting feature of The Frame Pro is also the unusual placement of HDMI 2.1 ports. We have as many as five at our disposal – four are located in the One Connect module, and the fifth, in micro HDMI form, is located directly on the TV. This solution is quite unusual but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimises any potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond counts. We have written separately about input lag, but we can reveal here that by connecting the equipment directly to the TV, we get the absolute maximum response speed from it.

iFFALCON U85X is an outstanding piece of gear for gamers that has pretty much everything you could ask for from a modern screen for console or PC. It features two full-fledged HDMI 2.1 ports with a full bandwidth of 48 Gbps, which opens the door to key technologies such as VRR and ALLM, ensuring smooth gameplay without screen tearing and with minimal lag. The TV effortlessly handles high refresh rates at various resolutions, and a real curiosity is the mode that allows for up to 240Hz when dropping down to Full HD quality. Everything is managed by the Game Bar (which is a faithful copy from TCL), allowing for instant switching of picture modes, personalization of the interface appearance, or even adding a virtual crosshair in the middle of the screen.