Samsung The Frame Pro 2026 (LS03HW) vs Philips OLED811

You can't fault The Frame Pro for one thing: brightness. At peak we measured about 850-900 nits, so the TV has plenty of power to make many HDR scenes look really impressive. Bright, full-screen shots and more colourful frames perform best. In those scenes The Frame Pro can make a good impression — the image is bright, punchy and has the effect we expect from HDR. In our measurements some scenes reached over 800 nits, and even in tougher passages the TV maintained a fairly respectable brightness level.

The problem starts when HDR depends on small bright elements shown against a dark background. Single lamps, stars or reflections can be bright, but very often the black level across a larger part of the image also rises. As a result the bright point itself can look good, but the whole frame loses a lot of quality. That means The Frame Pro shows HDR best in scenes that are simply full-screen. If a film or series contains many such shots, the effect can be genuinely enjoyable. In darker material the limits of local dimming become much more noticeable.

Colours

The Frame Pro deserves praise for its colour gamut coverage. The TV uses quantum dots, the solution known as QLED, so it can deliver really well-saturated colours. In our measurements coverage of the important DCI-P3 palette was around 94.5%, while the more demanding BT.2020 was about 72%.

Those are very solid results that in most scenes produce pleasant, saturated colours. Of course they are not as eye-catching as the values from the latest panels using RGB backlights, but The Frame Pro makes up for that in another way — colour stability. Regardless of the scene, colour saturation remains fairly consistent and there aren't situations where the TV loses colour badly in more demanding frames.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured about 1500 nits, which is a very good result for an OLED TV. You can see that clearly in films and series. Flashes of light have the right punch, especially when they appear on a dark background. In those scenes the OLED811 can deliver really impressive HDR. Of course this doesn't mean you'll see that level of brightness in every shot. When the screen is filled with a large area of white or a wide explosion, brightness falls to around 600 nits. That's still a good result, but such scenes don't have the same impact as small bright elements on a dark background. That's a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips also performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. So you get rich reds and lush greens, and while watching it's hard to fault it in that regard. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. There's also the issue of the white subpixel that the WOLED panel uses to help boost brightness. With very bright colours you can see a certain "washout": the colour is bright but loses some of its intensity. It's in exactly these situations that Samsung Display's QD-OLED panels have the advantage. In most films and series, though, this won't be something that immediately jumps out at you.

In SDR material The Frame Pro in Filmmaker mode performs quite well, though it falls short of perfect. White balance is relatively even, but as brightness increases the blue component diminishes, so brighter parts of the image can have a slightly warmer tint. A bigger difference is visible in the gamma, i.e. the screen’s brightness handling. Across most of the range it runs below our reference point, which means the TV brightens the midtones a little. As a result, the image can appear a little brighter and less contrasty than it should. The colour errors themselves aren’t huge, but they’re noticeable enough that calibration can still make a significant improvement.

In HDR content the white balance looks similar, being fairly even across much of the range, with larger deviations appearing only at higher brightness. The EOTF curve, however, is more revealing. The Frame Pro holds up fairly well against the reference values in the brighter parts of the image, but clearly lifts the darkest parts. This is primarily due to the TV’s backlight design. This also affects the colours. With less saturated colours the errors are still moderate, but they become significantly larger as saturation increases. In Colour Checker measurements many samples already show high error values. So the out-of-the-box HDR can be considered decent, but it’s definitely not an image we’d call very accurate.

The film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain minor in both SDR and HDR, so you can comfortably sit down to watch without adjusting the settings first. There are no large inaccuracies that would immediately distract from the film.

It’s not quite perfect, though. The white balance shows a slight lack of red relative to green, so whites and greys can have a faint greenish tint. It’s not a strong colour cast, but measurements clearly show it. There are also small luminance deviations in SDR: some parts of the image are slightly brightened, and the deepest tones aren’t always reproduced evenly. In HDR the TV stays much closer to the reference, although it occasionally lifts detail from the shadows. These are generally things that can be refined. The factory film mode provides a good starting point, and calibration will reveal how much more you can get out of it.

After calibration, the biggest improvements are seen mainly in SDR material. We managed to even out the white balance, but an even more important change was the gamma correction, which before calibration had the greatest effect on the picture's character. After the adjustments the gamma curve is now very close to the reference, so the image is not as bright in the mid-tones and simply looks more natural. Colour errors have also been noticeably reduced, so the effect of calibration in SDR is clearly visible.

In HDR the situation is a bit more complex. White balance was improved and in some ranges the TV tracks the reference much better, but at higher brightness levels deviations still appear. The same goes for colour reproduction; some errors can be corrected, but not all stem from the settings themselves. This reveals the limitations of the TV's design and the way its backlight and local dimming affect the HDR image. So with The Frame Pro, calibration makes the biggest difference to everyday content. Regular TV, YouTube and films and series in SDR (mainly those from cheaper streaming service tiers) can look noticeably better afterwards.

After calibration the Philips OLED811 delivers an image very close to the reference. We managed to even out the white balance and remove the slight colour cast visible in the factory settings. ColorChecker errors for SDR and HDR fell to around 1 to 2, with many samples even below 1. That's a level at which differences from the reference are hard to spot with the naked eye. We also improved the gamma, with only a slight lift remaining in the brightest whites. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small details, such as stars or subtitles. That gives the picture a bit of extra brightness that shouldn't be there, but otherwise it's hard to find fault. It was already good out of the box, and calibration allowed us to iron out most of the remaining issues.

The Frame Pro uses the NQ4 AI Gen3 processor, so in terms of image processing it behaves very similarly to other recent Samsung TVs. Upscaling works really well, with lower-resolution material being sensibly sharpened and the picture remaining readable without over-emphasising edges. With regular TV broadcasts or lower-quality YouTube content this can deliver a noticeable improvement, although viewers watching even older sources, such as VHS tapes, may notice a slight cropping on the left side (overscan).

It’s a different story for heavily compressed footage and the reduction of noise and posterization artefacts. The "Noise Reduction" feature can improve poorer material, but it fairly quickly starts to interfere with the picture and removes fine detail and film grain. So it’s best used sparingly and mainly when the source genuinely needs it.

The OLED811 handles processing lower-quality material reasonably well, though it's far from perfect. The "Banding reduction" function helps smooth tonal transitions and on the low setting gives a pretty good effect. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artefacts. It's a sensible setting for everyday viewing. Still, there's a bit of a letdown, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' hands, deal with the effects of heavy compression more effectively even at similarly low settings. A lot therefore depends on how a given manufacturer uses its capabilities.

We have a few more comments about the upscaling to 4K. There's plenty of detail, but overall the image looks rather soft. Edges are heavily smoothed, so the picture lacks some sharpness and clarity. You can partially correct this with the sharpness slider in the menu, though that will be extra edge enhancement rather than recovering detail. On the plus side, there's no overscan, and even with an SD signal the TV doesn't crop the edges of the picture.

The Frame Pro is equipped with a 144 Hz panel and, when connected to a PC, also supports 240 Hz at Full HD. That's mainly a feature aimed at PC gamers, but the TV also handles the standard 120 Hz refresh rate used for watching sport or gaming on consoles very well. A major plus is the low smearing. For a VA panel, The Frame Pro performs really well in this regard. You don't see the strong, dark trails behind moving objects that are fairly common on TVs with this type of panel. That keeps fast sport and dynamic games clear in motion. There's also a motion smoothing feature with adjustable strength, so for films and sports broadcasts you can tailor the motion to your preferences. You can find our recommended settings in the photo.

In terms of motion handling the OLED811 performs superbly. At 120 Hz, which is useful for console gaming and watching sport, the image remains clear and moving objects don't leave noticeable trails. The OLED's fast pixel response helps here. You can see it clearly in the UFO test, even on a dark background. There are also controls for motion smoothing. In movies you can adjust the strength of smoothing to your taste, from preserving a cinematic feel to much smoother motion. A separate blur-reduction control is useful for fast-paced content like live sports broadcasts.

For gamers, The Frame Pro has a lot to offer. The TV supports 4K at 120 Hz, VRR, ALLM and a correctly implemented HGiG. When connected to a PC you can also run 144 Hz at 4K, and even 240 Hz if you drop to Full HD. Samsung also bundles its usual set of gamer extras: an expanded Game Bar that lets you quickly view and change the key settings, and Game Motion Plus to improve smoothness for games running at 30 or 60 fps. There’s also the Gaming Hub and the ability to play in the cloud without needing to connect a console. The only real omission is Dolby Vision Gaming, which Samsung doesn’t support. Aside from that, The Frame Pro offers pretty much everything you’d expect from a well-equipped gaming TV today.

The OLED811 has almost everything you’d expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach up to 165 Hz. It also offers VRR to help avoid screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don’t have to go into the settings every time you start your console.

Another plus is the properly working HGiG, which ensures that once HDR is set on the console the TV doesn’t apply its own changes to image brightness. The Game Bar is also available, letting you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there’s a significant catch here, which you’ll read about below.