Samsung The Frame LS03D vs Samsung S85H

Samsung The Frame LS03D really does well with brightness. Results at the level of 700 nits make bright elements on the screen look impressive and detailed, whether they illuminate the entire screen or appear as tiny points of light on a dark background. In more demanding scenes, like the fourth sequence from the film Sicario 2, the blacks perform moderately, but we have already discussed this in the section on contrast. However, when it comes to brightness – this television definitely holds its own. An additional advantage is the quantum dot coating, which is QLED technology. Thanks to this, the coverage of the colour palette has been improved, although The Frame does not stand out in this regard compared to the competition.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 lineup. In the same film scenes last year’s model sat closer to about 700 nits, while the S85H can reach roughly 800 nits. That’s not a change that completely transforms the HDR experience, but the extra headroom is noticeable, especially with point highlights, reflections or stronger special effects. Around 800 nits is a very good result for an entry-level OLED and in most films it’s enough for HDR to have the necessary punch. Bright elements can clearly stand out against perfect blacks, and that contrast is still doing most of the work here. However, you need to remember the typical limitation of OLED technology. When a very bright scene covers a large portion of the screen, brightness can drop to almost half. This is the result of panel protections that limit its output with large bright areas.

Colours

The S85H can deliver very pleasant, saturated colours and in most HDR films it looks really good in that regard. We measured around 95% coverage of DCI-P3, so the palette most commonly used in films is reproduced to a very high degree. Skin tones, greens and stronger reds still have appropriate intensity and under normal viewing it’s hard to have major complaints. Only when you look more broadly at BT.2020 do the limitations of the new WOLED SE panel become apparent. Coverage was about 70%, a bit less than WOLEDs of the previous generation and noticeably less than QD-OLED panels. In films this isn’t a big loss, since most productions rarely use such heavily saturated colours. You’re more likely to notice it in games, where developers more often opt for more intense colours.

Samsung offers several picture modes in its televisions, but without a doubt, Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as often happens with mass production, the differences between individual units can be quite significant, and our tested model did not escape a few issues.

In the case of SDR content, the white balance leaned heavily towards red, with a slight boost in blue. This effect was particularly noticeable in comparison photos – for example, in a photograph of a boy whose face was unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which robbed it of depth.

In 4K HDR content, the white balance was once again dominated by red, this time combined with green. Meanwhile, blue clearly lost intensity, which could easily be seen on the Color Checker palette, where the colours began to "escape" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the television tended to overly brighten the image, particularly in the darkest elements of scenes.

Overall, while it did not look terrible, it definitely required correction. Fortunately, Samsung offers extensive calibration options, which provides a chance for a significant improvement in picture quality. Therefore, we proceeded with professional calibration to unlock the full potential of this television.

To evaluate colours we of course used Filmmaker mode, and in SDR our S85H unit was set very well from the factory. The largest deviation appears in the white balance, where as brightness increases it starts to lose a bit of blue. In practice this means whites and greys have a slightly warmer tint than they should. However, it's not a big fault and during normal viewing it generally isn't very noticeable. Gamma also stays close to the reference value, so the picture is neither overly bright nor unnecessarily dim. The S85H's SDR picture therefore looks really good straight out of the box. A few more imperfections appear in HDR. Here the white balance shifts more with rising brightness, with blue starting to dominate and the red component clearly lacking. This also results in larger errors in some colours. These aren't yet colour errors that completely change the character of the picture, but in direct comparison with the reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

After professional calibration, the Filmmaker Mode showcases its full potential. The white balance in HD content is exemplary – errors at the level of 0.5 indicate almost perfect accuracy in colour reproduction. The image now appears natural, and the colours are exactly as they should be. In 4K HDR content, the effect is not quite as perfect, but it still maintains a really high standard. The colours are vibrant, well-saturated, and the overall image quality is impressive.

So where does the problem lie, given our praise for the colour reproduction? Unfortunately, the entire experience is disrupted by the brightness characteristics. The gamma in HD content looks decent, but in 4K HDR, it’s not as good. The EOTF curve shows that the television excessively brightens certain parts of the image, which is a result of design limitations. The lack of local dimming means that the television is unable to accurately control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nonetheless, after calibration, Samsung The Frame LS03D offers excellent colour reproduction, particularly in HD content, and the overall look is significantly better than before the settings were adjusted.

Calibration delivers really good results on the S85H. First and foremost, we were able to set the white balance almost perfectly, which removes the slightly too-warm picture tone previously seen in SDR. Colour reproduction also improves significantly, with most errors falling to very low levels, and in everyday viewing it's hard to find any visible inaccuracies. You can also improve HDR quite a bit, although some issues remain that stem from the TV's inherent characteristics. The S85H doesn't always hold the luminance curve perfectly. The darkest parts are slightly boosted, while, as you approach the panel's limits, you can see small deviations in the brightest highlights. Add to that the limited coverage of the wider BT.2020 colour gamut, which of course cannot be overcome by any calibration. Despite that, the end result is very good, and after calibration the S85H can deliver a really well-tuned, natural image.

It's time to check how Samsung The Frame LS03D copes with older, lower-quality materials. We already know that the smoothness of tonal transitions is at a very high level, so we were curious to see how the TV would handle smoothing them out.

The noise reduction feature in the “Standard” setting does its job well – tonal transitions are noticeably smoothed out, and the image doesn’t lose too much detail. However, it’s worth noting that this effect also smooths out film grain, so its usage will be a matter of individual preference.

When it comes to image scaling, the TV performed really well too. The tested image came out solid – the model was accurately represented, with clear details. The branches in the background, although slightly frayed in places, generally look natural and do not stand out as a flaw.

Samsung's S85H uses the same proprietary AI processor, AI NQ4 Gen2, as last year’s S85F, and in terms of digital image processing it performs quite well. Upscaling is one of the model's stronger points. Lower-resolution material is well sharpened, edges look natural and the picture doesn't come across as overly artificial. Just remember a common quirk of Samsung TVs: at very low resolutions you can't completely turn off overscan, so the TV may slightly crop the left edge of the picture. The "noise reduction" function, that is smoothing weaker tonal transitions, also works very well. The processor can effectively remove posterisation and other artefacts visible in lower-quality material. However, be careful with the strength of this function, because Samsung can be fairly aggressive here. When it's activated, along with unwanted artefacts, fine details such as skin or clothing texture also start to disappear.

To start off, it’s worth noting that the model we tested in the 55-inch size, along with the 65, 75, and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series only offer 60 Hz panels, which is worth considering when making a purchase. In terms of improving motion fluidity, the TV offers a feature called “Image Clarity.” This is a classic motion smoother that gives users the ability to adjust using two sliders:

Blur Reduction – this controls image sharpening during dynamic scenes. The higher the value, the less blurring occurs during fast camera moves or moving objects. However, setting it too aggressively can make the image look unnatural and resemble a “soap opera.”

Judder Reduction – this slider affects the smoothness of frame playback, especially in materials with lower frame rates, such as movies (24 fps). Higher settings can smooth out motion but can also lead to excessive “plasticity” of the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to personal preferences. It’s a good idea to experiment with the settings to find the perfect balance between fluidity and a natural look for the image. We recommend setting them as shown in the picture.

The S85H uses an OLED panel, so it performs brilliantly when it comes to motion blur. Pixels respond almost instantly, so moving objects don't produce the characteristic ghosting seen on some LCD TVs. This is especially noticeable with sport or fast-paced games, where the picture stays very clean even during rapid motion. The panel itself runs at 120 Hz. That's more than enough for movies, TV shows, sport or console gaming. It's a shame Samsung didn't include a higher refresh rate aimed at PC gamers, as more and more TVs now offer 144 or even 165 Hz at 4K. However, that doesn't affect motion handling in films or sport.

There's also the classic motion smoothing feature with two settings: blur reduction and judder reduction. So you can choose whether films should keep their cinematic 24 frames per second, or whether you'd prefer to smooth them a bit. The S85H gives plenty of freedom here, and the interpolation itself works well and, with sensible settings, doesn't generate too many artefacts.

The Frame LS03D in the 2024 version is equipped with four HDMI ports, but only one supports the 2.1 standard with a bandwidth of 40 Gb/s. This is important information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC.

In terms of features for gamers, The Frame truly has a lot to boast about. We have ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate) and HGiG. It’s worth mentioning that HGiG has been very well implemented here, which is particularly important as the television does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG turns out to be a better standard for gaming.

Samsung hasn't forgotten about features that enhance the gaming experience. Game Bar is an expanded panel for gamers that allows quick adjustment of screen settings without having to dig through the television menu. We can even change the aspect ratio from 16:9 to the panoramic 21:9, which can be a significant advantage for some gamers.

However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoother dedicated to games that adds additional frames of animation without significantly affecting input lag. The effect is really noticeable – the image seems much smoother, which will be particularly appreciated by fans of dynamic titles.

In summary – Samsung The Frame LS03D is a television that offers a solid set of features for gamers. Although the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions make gaming on this television a truly enjoyable experience.

Samsung S85H is very well prepared for gaming, essentially regardless of whether you connect a console or a computer. The manufacturer didn’t skimp on connectors and all four HDMI ports support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR and ALLM without worrying which input to plug your console into. With multiple devices that matters a lot, since you don’t have to choose between a console, a PC or a soundbar connected via eARC. The feature set itself is very complete. The S85H supports VRR, FreeSync and automatic switching to Game Mode, and Samsung also offers its expanded Game Bar, which lets you quickly view the key signal parameters and change settings without leaving the game. The only real omission is Dolby Vision, which will matter mainly for Xbox owners. That’s a typical trait of Samsung TVs. Game Motion Plus performs very well and it’s one of the features that has set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as large an increase in input lag as a classic motion interpolator. In practice, for slower-paced games, racing or action titles it can genuinely improve motion perception, especially if you’re sensitive to low frame rates.