SAMSUNG S90F (WOLED) vs TCL A400 PRO

Does the S90F handle not only blacks but also bright parts of the image? Definitely. The stories about OLEDs as "dark screens" can slowly be regarded as myth. The Samsung S90F, like the LG C5 based on a very similar panel, achieves brightness exceeding 1000 nits. This is a value more than enough to enjoy impressive and dynamic HDR images – both in movies and series. Most of the scenes we tested look stunning, with well-defined highlights and high contrast. Of course, OLED technology still has its limitations – in very bright, full-screen sequences, such as the test card from the movie The Meg (photo 5), the television may noticeably dim the image. However, it should be emphasized that such scenes are rare. It can be said that the HDR effect is good enough that even mid-range OLED models like the S90F can provide a cinematic experience in the home living room.

The TCL A400 Pro is a moderately bright TV. Its peak brightness reaches around 600 nits. That level already allows for a real HDR effect and in many films it does deliver a noticeably more appealing picture than in SDR. However, it’s not a level that dazzles by brightness alone. The A400 Pro is not one of those TVs that bombard the viewer with a powerful flash in every dramatic scene. The biggest limitation is visible with small bright elements on a dark background. Because of fairly aggressive zone control, the TV can significantly reduce their brightness, in extreme cases down to around 100 nits. That means small lights, sparks, stars or single highlights can be much less visible than they should be. It should be added, though, that this isn’t done without reason. The A400 Pro does this to keep black levels as deep as possible and to limit the halo effect around bright objects. It’s a deliberate compromise: the TV more often opts for deeper blacks rather than maximising point highlights. On the one hand this is understandable, especially given a limited number of dimming zones, but on the other you should be aware that the HDR effect won’t always be as strong as the peak brightness alone might suggest.

On the plus side, the colours are a strength. The PFS LED filter used here, marketed by the manufacturer as QLED, delivers suitably saturated colours. Our measurements showed about 94% coverage of the DCI-P3 gamut and around 74% of BT.2020, which is a solid result for this class.

Samsung S90F, like most modern televisions, offers many picture modes, but – following our testing tradition – we checked it out in the best one, which is the Filmmaker mode. Thanks to this, the image looks much more natural than in the default, often oversaturated settings. It was neither overly saturated nor artificially dimmed – simply closer to what one should see. Of course, “more accurate” doesn’t mean “perfect”. Unfortunately, our S90F had significant issues with white balance, particularly in the blue color range, resulting in a slightly yellowish filter being applied to most scenes. Someone might say it looks more “filmic” – because it’s warmer – but let’s not kid ourselves, George Lucas didn’t film Star Wars in sepia 😉 (you’ll find a comparison with the scene below as always).

Additionally, in HDR materials, there was an issue with brightness management. The EOTF curve showed a clear “spike” in brightness – the television brightened the image more than it should have, causing some effects to look too intense and deviating from the reference. Fortunately, some of these problems can be eliminated through professional calibration – you’ll read about its effects later in the review.

As usual, we carried out colour measurements in the best‑tuned picture mode, Filmmaker Mode, the one intended to be closest to the creators’ intentions. The A400 Pro, of course, also offers other picture modes, but in practice they show much larger colour errors and interfere more with the image character. So we won’t cover them in detail in this part of the review. How does the factory colour reproduction fare? In short: really very well. In fact, looking at our measurements, it’s excellent. Both the white balance and the luminance response were set surprisingly precisely. The errors were so small that during the measurements we genuinely rubbed our eyes in surprise. Such good factory settings don’t happen often, even in televisions running Filmmaker Mode. All the more reason to praise TCL, because the A400 Pro straight out of the box can produce an image very close to how the source material should look. The results were so good you could easily think someone had already given this unit extra attention and tried to calibrate it. Our one bit of nitpicking comes down to a single issue. In SDR material the image was slightly brighter than the reference for a dark room, because the factory gamma was set closer to 2.3 than 2.4. It’s not a large error and most viewers probably won’t even notice it. We should note, however, that we are talking about our specific test unit. There can always be some variation in factory colour between individual units, production batches or screen sizes. We do not assume every A400 Pro will look identical straight out of the box.

After calibration, we managed to eliminate practically all the previously mentioned errors. Older movies in SDR quality finally look like they should – without the sepia effect or artificial aging of the image. The atmosphere of the classics is back in place (no thanks needed, Star Wars fans), and the colours no longer resemble an Instagram filter.

One of the key changes was also the improvement of brightness characteristics in HDR content. We managed to control the EOTF curve in almost a reference manner. Admittedly, the most demanding users may detect minimal deviations in brightness, but honestly – most viewers won't even notice that. And it's no surprise because the vast majority of errors fall below the ΔE 3 value, which is below the threshold of visibility. After calibration, the S90F (WOLED) becomes a truly excellent display – one on which you can enjoy nearly perfect image quality.

Despite the outstanding factory tuning, we couldn't resist checking how the TCL A400 Pro would respond to professional calibration. With such a strong starting point, we were especially curious whether we could squeeze even more from this TV. And here we have to boast: we managed to bring our sample to absurdly low colour errors. Results below 1 are something you don't see every day, even on very good TVs. Such outcomes are more often associated with professional reference monitors than with a lifestyle TV for the living room. In terms of white balance and colour reproduction, the A400 Pro after calibration simply excelled. The only thing we can pick on after closer analysis concerns the brightness response. The TV can vary the luminance level depending on the content being displayed, and quite often the picture is a little darker than it should be according to the reference. This most likely stems from the way the Mini-LED backlight and the local dimming algorithms work in this model. That said, it doesn't ruin the overall impression, because in terms of colour precision the A400 Pro after calibration reached a level that was genuinely hard to expect.

Digital Image Processing in S90F:

Fortunately, Samsung, like in most of its models, manages to effectively tackle the unwanted posterisation effect in the S90F. The function responsible for this element is noise reduction, which does a pretty good job of smoothing tonal transitions and eliminating unnatural colour blending – of course, within its capabilities. Unfortunately, it works quite aggressively, so using it comes with trade-offs. In addition to improving gradation, it can also remove film grain or slightly soften facial features. In this case, the choice is yours – do you prefer a more "clean" image, or do you care about preserving the original texture of the material.

Image Scaling in S90F:

In this year's model, Samsung has implemented its proprietary AI processor – NQ4 Gen3, which really handles upscaling quite well. In our test scenes, the TV effectively "pulled up" lower quality towards artificial 4K – the image was more enjoyable to view, and the differences in sharpness between native and scaled content were minimal. Unfortunately, behind all this AI marketing façade lies a certain shortcoming. The S90F struggles with overscan. If you reach for truly archival material – e.g. a VHS tape of your parents' wedding – you have to reckon with the fact that the lower part of the image may get cut off. The function to adapt the image to resolution simply does not work as it should here.

Digital image processing is unfortunately one of the weaker points of the TCL A400 Pro. That does not mean the TV performs badly, but it’s hard to call it anything clearly above standard. The upscaling itself is acceptable: edges are fairly well smoothed, the picture does not look overly sharp or “pixelated”, and lower-quality material can be watched without major discomfort. At the same time the overall image has a slightly soft character and you don’t see the kind of precision that the best image processors in more expensive TVs can offer.

Handling of tonal transitions caused by heavy compression is much worse. TCL equipped the A400 Pro with a “Gradual Smoothing” feature that in theory should reduce visible colour banding and artefacts in lower-quality material. In practice, however, its effectiveness is very limited. It does not improve tonal transitions in any noticeable way, and at higher settings it can further smooth image detail, giving it an artificial, slightly blurred character. For that reason we think it’s best to leave this feature off. The A400 Pro copes decently with basic image scaling, but if you often watch heavily compressed material with visible posterisation, this model will not be one of the best choices.

S90F really handles motion excellently – after all, it’s an OLED with a 144 Hz panel, so sports and games look absolutely stunning on it. The image is smooth, clear, and there’s no room for ghosting or blurring, which can sometimes plague cheaper LCDs.

The TV also comes equipped with motion smoothness settings that allow you to customise everything to your liking. We have motion blur reduction and judder reduction – you can set it so that the image is super smooth (even to the point of looking a bit soap opera-like), or more cinematic, with the classic “jumpiness” of 24 frames. The choice is yours, Samsung imposes nothing.

The TCL A400 Pro is equipped with a 144 Hz panel, but in practice we're most interested in how it performs at 120 Hz. That's the refresh rate most consoles, as well as many sports broadcasts and high-motion sources, are limited to today. In that range the TV performs quite well. Motion clarity is really good, especially after properly configuring the motion smoothing. The 'Motion Clarity' function improves smoothness. Its settings include two sliders that let you tailor the motion smoothing to your preferences, separately for low-frame-rate and high-frame-rate content. This allows you to achieve either a more cinematic look or a noticeably smoother image. If you don't want to fiddle with manual configuration, you can use built-in presets such as Low, Medium, High, Cinema or Nature.

When it comes to gaming features – the S90F has absolutely nothing to complain about. Aside from the lack of Dolby Vision, which is already the norm for Samsung. The television operates at 144 Hz, has four HDMI 2.1 ports, so you can easily connect more than one console or PC. Onboard, we also find Game Bar – a practical tool that allows you to quickly preview picture settings, VRR status, ALLM mode, and other useful options. Game Motion Plus deserves special mention – Samsung's proprietary motion smoother that actually works sensibly in games. The image appears smoother, but without any artificial effects or slowdowns.

It's also worth mentioning the HGiG feature, which – and this may be a slight surprise – works correctly. We bring this up because Samsung clearly messed something up in one of the recent updates, and in some models, the option responsible for HGiG simply... disappears from the menu. Setting it up becomes almost impossible. Fortunately, our S90F unit did not have this issue, but the situation is dynamic, so it's worth keeping this in mind and regularly checking for new software versions and information from the manufacturer.

In terms of gaming features the TCL A400 Pro performs brilliantly. The TV has practically everything you’d expect from a gaming TV today: support for 4K at high refresh rates, VRR, ALLM, correct implementation of HDR formats in games, including Dolby Vision, and HGiG. That means it works well with both next‑gen consoles and PCs. Another plus is the inclusion of a Game Bar, a dedicated panel with the most important settings for gamers. From it you can quickly check basic information about the signal, refresh rate or active features, and customise the appearance and behaviour of some settings to your preferences. It’s a solution that may not change picture quality by itself, but it greatly improves the convenience of using the TV while gaming. The only thing to criticise is the number of full HDMI 2.1 ports. The A400 Pro has only two such ports out of four, and one of them also serves as eARC. In practice this means that if you want to connect two next‑gen consoles and a soundbar you may run into some limitations. In that scenario you’ll need to either swap devices or use extra equipment, such as an AV receiver or a soundbar with HDMI inputs. Even so, it’s hard not to rate the A400 Pro very highly as a gaming TV. The gaming feature set here is genuinely powerful.