Samsung R95H Micro RGB vs Philips PQS9011 / PQS9001 (The One 2026)

In terms of brightness the Samsung R95H shows it’s still a top-tier TV, although the results aren’t always as spectacular as you might expect from a flagship Micro RGB model. In synthetic tests the TV can exceed 2400 nits, so it certainly has plenty of power. Crucially, it can maintain high brightness even when bright elements occupy a larger part of the screen. In real movie scenes the situation is a bit more complex. The R95H typically reaches around 1000 to 1400 nits, which still delivers a very good, punchy HDR effect. Bright sun, specular highlights and lights can look really impressive, and the TV has enough power for HDR to stand out clearly from ordinary SDR.

The problem mainly appears in very dark scenes with single, small light sources. Here the local dimming algorithm prioritises deep blacks and reducing halo over the maximum brightness of such elements. As a result, small lights can be noticeably dimmed. Overall, HDR performs well, but not without limitations. The R95H has huge brightness headroom, especially in larger, brighter parts of the image, but in difficult, dark scenes its capabilities are mainly limited by the way local dimming works.

Colours

Colours were meant to be the biggest revolution from the RGB backlight and indeed the R95H shows considerable potential here. The assessment isn’t as simple as synthetic measurements might suggest. On test patterns the TV performs brilliantly – BT.2020 coverage reaches nearly 94% and DCI-P3 98%, so particularly strongly saturated reds and greens can look really impressive. The picture changes a little when, instead of test patterns, we start measuring real movie scenes. Then BT.2020 coverage drops to about 87% and DCI-P3 to 93%. It seems that with more complex imagery the RGB zones are not always able to maintain the same high colour saturation as on simple patterns. They are still saturated, but the advantage of the new backlight isn’t as large as the manufacturer’s figures might suggest.

The Philips PQS9000 is a moderately bright TV — in our HDR scenes it reached roughly 450 to just over 500 nits. That’s enough to notice a difference compared with SDR. Sun reflections, lamps or flares have a bit more punch than on basic TVs, whose brightness often tops out around 300 nits. It’s not, however, a level where bright elements look especially striking. The biggest limitation remains contrast. Without local dimming, brightening a bright object also lifts the black level around it. So there’s no clear separation between strong highlights and a dark background, and it’s that kind of pairing that really shows what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer markets this model as QLED, it actually uses a PFS phosphor instead of quantum dots. The solution itself doesn’t prevent good results. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice this means the vast majority of colours used in HDR films and series will have appropriate saturation. Lush greens or intense reds aren’t a problem and add appeal to the picture. Limitations are easier to notice in some games and rarer content that use the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. At its price point the PQS9000 has nothing to be ashamed of.

To assess factory colour reproduction we chose Filmmaker mode, the setting that should, in theory, be closest to how the creators prepared the image. Unfortunately the R95H does not fully exploit its panel’s capabilities. The biggest issue in SDR is the gamma. The image is noticeably brightened across almost the entire range, which robs it of some depth and makes it look flatter than it should. The white balance is not ideal either — as brightness increases there is a bias toward red and a lack of blue, making the image too warm. You can see this especially on bright elements and skin tones, which can look more reddish than they should. It’s similar in HDR. The EOTF curve sits above the reference value for a large part of the range, so the R95H again brightens the image compared with how it should appear. Combined with an inaccurate white balance, this means colours here are not as precise as we would expect from a TV of this class. The factory Filmmaker setting is therefore not the R95H’s strongest suit. At first glance the picture may look impressive because it is bright and strongly saturated, but in terms of fidelity to the source material there is still plenty of room for improvement.

The factory picture settings for Movie mode on the PQS9000 unfortunately need tweaking. In SDR the biggest problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, in places even slightly pink. Gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the image look flatter than it should.

In HDR the white balance itself performs significantly better. Apart from minor deviations the components sit close together, so there isn’t the same obvious tint as in SDR. The EOTF curve, however, shows a slight brightening of parts of the image, and the biggest issue appears when measuring the wide colour gamut. Many shades deviate substantially from the target, with errors reaching ΔE 8–9. The good gamut coverage we praised earlier therefore doesn’t mean the TV hits specific colours accurately. It can display a wide range of colours, but out of the box it doesn’t use that range very precisely.

The R95H responds very well to calibration. In SDR we were able to set the white balance and gamma almost perfectly, and colour errors dropped to a very low level. The difference compared with the factory settings is therefore substantial, and after calibration the picture looks noticeably more natural. In HDR we can also make significant improvements, especially in terms of white balance and overall colour accuracy. The situation is a bit different when it comes to managing brightness and colour saturation. At a certain point we hit limits caused by the way the RGB backlight and local dimming operate. Individual zones have to control both the brightness and the colour of the light at the same time, so in more demanding scenes you can’t always achieve exactly the same saturation and brightness that the TV shows on simple test patterns. Calibration simply can’t entirely overcome that. Even so, after calibration the R95H delivers accurate image reproduction, and most of the errors we saw with the factory settings can be effectively eliminated.

Calibration brought a big improvement, especially with SDR content. We managed to even out the white balance and remove the earlier colour cast, and the Color Checker measurements now look very good. Colours are much closer to what they should be on screen, so with regular TV or SDR movies we can be happy with the result. Unfortunately HDR spoils that a bit. On the one hand it's limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there are colour errors we couldn't correct because the CMS settings, i.e. colour management, were greyed out and inactive. That loses Philips points with us. The white balance can be fine-tuned, but without access to wide gamut controls you can't as effectively sort out colours in HDR. It's a shame, because the SDR results show the potential is there, but we weren't allowed to fully make use of it everywhere.

The Samsung R95H uses the new Micro RGB AI Processor, but in practice we didn’t notice a big leap compared with the NQ4 AI Gen2 or Gen3 chips found in the manufacturer’s other TVs. Upscaling itself still performs very well. The image is properly smoothed while retaining plenty of sharpness and not looking overly soft. That’s definitely one of Samsung’s strong points. It’s a pity that with very low-resolution material you still can’t completely disable overscan.

The processor also handles banding well and can effectively smooth unwanted posterisation. The noise reduction feature works really effectively, but you need to use it with restraint. At higher settings it can start to interfere quite heavily with the picture and even remove natural film grain. So it’s best to use it only when the source is genuinely heavily compressed.

Digital image processing on the Philips PQS9000 performs well, although we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality sources, but it works rather unevenly. It can improve one part of the picture, only to, moments later and still within the same scene, lose its way and show banding between shades again. On the plus side, it doesn't strip away film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best and that's the one we recommend.

The upscaling to 4K itself is adequate, though the image is very soft. Edges are heavily smoothed, which may leave some viewers wanting more clarity. In that case, it's worth slightly increasing the sharpness in the TV menu, as this will help emphasise edges more. Don't overdo the sharpness slider, though, or you'll get artificial halos instead of an improvement.

Samsung R95H has a 165Hz panel, so its motion handling is genuinely excellent. At 120Hz, for example when gaming on a console or watching sport, motion blur is minimal, and when you connect a PC you can use the full 165Hz and further improve motion clarity. Bear in mind it's still a VA panel, so it doesn't respond as instantly as OLED. Sometimes you might notice slight ghosting behind a moving object, but from a normal viewing distance it shouldn't be bothersome. For movies and TV shows you can also use the adjustable motion smoothing. You can keep the more cinematic 24 fps look or gradually smooth motion if you prefer a more fluid image. Samsung gives plenty of freedom here, so it's easy to find a setting that suits your preferences.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just about the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's particularly pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and in this respect Philips has pleasantly surprised us.

The "Motion Styles" feature is used to adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the material you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and see which level of smoothing suits you best.

In terms of gaming the Samsung R95H is almost a complete TV. When you connect a PS5 or Xbox Series X you can use 4K at 120 Hz, VRR and ALLM, and the TV also works correctly with HGiG. The only major omission is Dolby Vision Gaming, which Samsung, like on its other sets, simply doesn't support. There's also the Game Bar, already known from other Samsung models, which lets you quickly check the frame rate, VRR status or HDR format and change key settings without leaving the game. You can also brighten darker parts of the picture or change the screen aspect ratio.

Samsung also offers Game Motion Plus, a motion-smoothing feature designed specifically for gaming. It makes most sense in titles running at 30 fps, where it can noticeably improve smoothness and make camera movement feel much nicer. You should just remember this comes at the cost of higher input lag (about 60 ms), so it's not the best choice for online or fast-paced games. It's also worth mentioning the Gaming Hub, which lets you run some games directly from the cloud without connecting a console. In terms of gaming features it's hard to find any major omissions on the R95H.

Features for gamers

In terms of gaming features the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to choose which one gets the full capabilities. Consoles can use 120 Hz at Full HD, 1440p and 4K, and a PC can also run 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range runs from 48 to 240 Hz, with the upper limit applying to Full HD mode.

It also includes ALLM, so the TV switches itself into game mode, and a properly working HGiG, which is handy when setting HDR on the console. There's a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy because of very high input lag. Apart from that caveat, the feature set is really solid.