Samsung QN990F vs LG OLED B6

Samsung QN990F is one of the bright televisions, and this is immediately apparent in tests. In measurements, it achieved around 1300 nits, which in practice allows you to enjoy films as their creators intended. Bright scenes have the right strength, lights shine, and the impression is truly cinematic. In standard test patterns, sequences number 1, 3, and 5 performed the best – there, brightness remained around 800-1000 nits, and the image looked very natural. In more difficult segments, it could dip to around 600 nits, but the level was still sufficient for details to be clearly visible. However, it should be added that with such highly contrasted shots, the halo effect returns – the same one we mentioned regarding blacks. Bright elements can leave a glow on dark backgrounds, and this is immediately noticeable. As we are dealing with a QLED, the colour palette is expanded, and the colours present themselves impressively. The problem is that with such a flagship model, we expected better numbers. 91% coverage of DCI-P3 and about 67% BT.2020 are results that can be considered solid but not outstanding. This gives an image that is vibrant and appealing; however, the competition in this and lower price ranges can show even more.

LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year's B5. That's down to LG Display's new budget OLED SE panel. In practice this simply provides a bit more headroom and makes HDR look fuller in many scenes than on last year's lower-end OLEDs. That doesn't mean the B6 has no limitations. In very bright shots, when a large part of the screen is brightly lit, brightness can fall below 400 nits. This behaviour is typical of OLED TVs (especially in this segment), and it's then you see the biggest difference compared with pricier models. All the same, we rate the B6's results as really solid. It's still not a TV built to break brightness records, but the HDR effect is strong enough that films really feel like a step up from ordinary SDR picture.

Colour gamut

Using the OLED SE panel has had some impact on wide colour-gamut coverage. Compared with last year's model the figures have dropped by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn't mean the colours on the LG B6 are weak. In most films and TV series they look vivid, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD-OLED panels. This is due to the WOLED panel structure. In addition to the red, green and blue subpixels it also uses a white subpixel that helps boost brightness. This comes at a cost: at very high luminance some of the colour is effectively 'diluted' by the white light, so saturation of some hues can be slightly lower. Day-to-day it's not a big problem, but you can see it in the most demanding scenes.

We tested the QN990F in Filmmaker mode, which is the best out-of-the-box setting available. Right from the start, we noticed a few significant issues. The biggest problem was with white balance. Due to too little blue, as well as incorrect ratios between red and blue, the image—especially in scenes with a lot of white—appeared too yellow, and at times even orange. On the Color Checker palette, these errors didn't look dramatic as they hovered around a value of 4, but in everyday viewing, especially with strong whites, they were most noticeable. We also noticed problems with brightness management—the TV struggled to maintain details in the smallest parts of the image, mainly due to how it manages backlight zones. Fortunately, Samsung provides plenty of room for adjustment when it comes to setting corrections. We know that with proper calibration, much more can be extracted from this screen.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes give very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is a far better starting point than Vivid or Eco, where the picture is heavily boosted and noticeably less natural. For SDR content the factory settings perform really well. Colour errors are small, gamma behaves correctly, and the picture looks natural during regular viewing and does not seem overly enhanced.

It's a bit worse with HDR. Once you start playing that kind of content it's quickly apparent the white balance isn't perfectly set. Too much blue and red makes the image take on a slightly pink tint. Colour gamut measurements and the ColorChecker confirm this, with samples clearly shifting in that direction. It's not a defect that completely ruins the picture, but you can notice it with HDR films. So anyone who wants the most faithful image should consider calibration, which we cover later in the review.

After carrying out the calibration, we managed to bring the white balance into order and eliminate the earlier shortcomings in shades of blue. As a result, the picture no longer looked like it had a slight yellowish filter – the whites are cleaner, and the whole thing presents itself much more naturally. We also managed to tame the brightness characteristic in HDR content to some extent. The television now handles maintaining detail in blacks much better and does not lose them as much as before. However, when we look at the EOTF curve and how the QN990F reproduces brightness in films, it is evident that it still tends to accentuate details in dark areas more strongly. This is a characteristic feature of Mini-LED technology and, more specifically, how it is managed by the QN990F, which is practically impossible to eliminate completely. Despite this, after calibration, the picture looks significantly more natural, mainly due to the correct exposure of white light. The final effect is definitely more pleasant to the eye and closer to what we expect from a flagship television.

During calibration we focused mainly on HDR material, because that’s where the factory settings needed the most correction. We didn’t neglect SDR, though. After tuning it was brought almost to perfection. Colours are very accurate and brightness is controlled as it should be. The biggest change in HDR came from improving the white balance. After removing excess red and blue the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colours that had previously leaned towards pink improved. After calibration most errors fell below Delta E 2-3, the threshold at which an average viewer stops noticing differences with the naked eye. So the LG B6 can produce a very accurate picture, especially for the manufacturer’s entry-level OLED model.

The QN990F deserves the highest praise for its upscaling capabilities. The processor responsible for 'lifting' classic TV to 8K resolution does a really decent job. Watching footage in 576p, we had no illusions that we would suddenly see a miraculous transformation like in an advertisement, where the image magically turns into crystal-clear 8K. Nevertheless, the final effect was surprisingly good; the picture looked clean and sharp. It's just a shame that the TV, like most Samsung models, has an overscan issue, which slightly cuts off the edges of the screen from the left side.

When it comes to image processing, Samsung offers a feature called "noise reduction," which in theory should improve tonal transitions in older materials, where they are usually more noticeable. Unfortunately, here we felt quite disappointed. The feature performs poorly – it struggles with unwanted banding and can even introduce its own artifacts. On the plus side, it’s worth noting that the TV doesn’t remove film grain when using this feature, but in practice, that’s a poor consolation when the noise reduction itself turns out to be practically useless.

LG B6 copes very well with lower-quality material. Much of that is down to effective digital image processing, which can mask some source imperfections without excessively smoothing the whole scene. The "Smooth Gradation" feature proves particularly useful. It lets you noticeably reduce posterization mentioned earlier, especially in dark parts of the image. The safest choice is to set it to Low or Medium. The feature still effectively smooths out harsh tonal transitions, but doesn't yet interfere too much with fine details. Die-hard purists can of course leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a fair amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations are only noticeable with very poor sources below 720p, where the smallest text and fine elements aren't always perfectly sharp, but this is true for almost every other TV on the market.

QN990F can easily be called one of the fastest TVs in the world. In 4K mode, it can display images at a frequency of up to 240 Hz, which until now was more associated with gaming monitors than with living room TVs. However, in everyday viewing, what's more important is how it handles an 8K signal at 120 Hz – and it performs very well here too. Motion remains smooth, and the TV handles even the most demanding content without breaking a sweat. Additionally, there's the motion smoother, or "Image Clarity." Thanks to this, you can adjust the picture to your preferences – leave it slightly cinematic with a bit of judder or switch to maximum smoothness, which works brilliantly for things like sports broadcasts.

One of the biggest advantages of OLED panels is their very fast pixel response time. That keeps the picture sharp and prevents visible smearing that often appears on LCD TVs. It does have a downside, though. During slow camera pans motion can look a bit choppier than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 this is easy to tame with TruMotion. With the motion smoothing set correctly you can get smoother motion without giving the picture an exaggerated soap-opera effect.

It has to be said straightforwardly – the QN990F is one of those televisions that scream they were designed with gamers in mind. Samsung has been developing its gaming solutions for years, but here we have a true package. Sure, it lacks Dolby Vision support in games, which is a downside that will always come up in discussions. However, aside from that, the list of features is truly impressive. To start, we have the Game Bar – a handy menu that allows you to quickly check and change game-related settings. You can see things like VRR enabled, frame rate, or aspect ratio settings there. It's like a little “dashboard” so you don’t have to dig deep into the menu to fix something. Since the word VRR was mentioned: yes, variable refresh rate is present here and works flawlessly. Plus, there's ALLM, which automatically switches the television to game mode as soon as the console is turned on. These may seem like small details, but together they make using the QN990F simply convenient and hassle-free.

However, the greatest impression comes from the number of ports. Four wireless HDMI 2.1 ports as standard is already great news, as there's no need to choose whether to connect the console, the receiver, or maybe even the PC. There's comfortably enough room for everything here. And if we add another micro HDMI (which we recommend connecting directly to the console), hidden within the casing, then in practice we have five inputs in full 2.1 standard. Let’s also add support for high refresh rates – 120 Hz in 8K or even 240 Hz in 4K – and we get a television that not only keeps up with the new consoles but also feels ready for consoles that aren’t even out yet.

LG OLED B6 has plenty going for gamers; it's a complete base for the PS5, Xbox Series X/S or a solid PC. It comes with four full-size HDMI 2.1 ports with 48 Gb/s bandwidth, so you can forget about annoying cable swapping when you want to connect several newer devices at once. We get a full package of sync technologies, from classic VRR to G-Sync and FreeSync. The panel effortlessly syncs its refresh rate to the frame pacing produced by your console or graphics card. Of course ALLM is present: the B6 automatically recognises when a game is running and immediately cuts latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG means that after an initial calibration in the console settings the picture won't suffer from blown-out whites or lost detail in bright areas. The icing on the cake is the Game Bar. Instead of digging through the full menu mid-game, a single click lets you correct shadow visibility, tweak chosen parameters or simply check the display's current mode. All of this makes the LG B6 a great choice for gamers.