Samsung QN990F vs IFFALCON U85X

Samsung QN990F is one of the bright televisions, and this is immediately apparent in tests. In measurements, it achieved around 1300 nits, which in practice allows you to enjoy films as their creators intended. Bright scenes have the right strength, lights shine, and the impression is truly cinematic. In standard test patterns, sequences number 1, 3, and 5 performed the best – there, brightness remained around 800-1000 nits, and the image looked very natural. In more difficult segments, it could dip to around 600 nits, but the level was still sufficient for details to be clearly visible. However, it should be added that with such highly contrasted shots, the halo effect returns – the same one we mentioned regarding blacks. Bright elements can leave a glow on dark backgrounds, and this is immediately noticeable. As we are dealing with a QLED, the colour palette is expanded, and the colours present themselves impressively. The problem is that with such a flagship model, we expected better numbers. 91% coverage of DCI-P3 and about 67% BT.2020 are results that can be considered solid but not outstanding. This gives an image that is vibrant and appealing; however, the competition in this and lower price ranges can show even more.

iFFALCON U85 handles HDR in a rather dual manner – on one hand, it can surprise with a solid peak brightness of around 650 nits, which places it significantly above average in this price segment. This is particularly evident in bright, full-screen scenes. Examples from movies like Life of Pi or the final test sequences from The Meg prove that the television can maintain the power and essence of the HDR effect when the entire panel needs to “ignite,” providing truly satisfying experiences. However, problems arise in high-contrast scenes, where smaller, bright details appear on the screen; the dimming algorithms prioritise black depth so much that they can crush the brightness of small bright points down to just 100 nits, drastically lowering the image dynamics and depriving us of the real “bite” we expect from HDR standards. However, the question of colours remains a sweetener, as thanks to the use of the PFS phosphor filter (marketed as QLED by the manufacturer), they look very good, achieving nearly 94% coverage of the DCI-P3 colour gamut, which allows for a rich and vivid image in most content.

We tested the QN990F in Filmmaker mode, which is the best out-of-the-box setting available. Right from the start, we noticed a few significant issues. The biggest problem was with white balance. Due to too little blue, as well as incorrect ratios between red and blue, the image—especially in scenes with a lot of white—appeared too yellow, and at times even orange. On the Color Checker palette, these errors didn't look dramatic as they hovered around a value of 4, but in everyday viewing, especially with strong whites, they were most noticeable. We also noticed problems with brightness management—the TV struggled to maintain details in the smallest parts of the image, mainly due to how it manages backlight zones. Fortunately, Samsung provides plenty of room for adjustment when it comes to setting corrections. We know that with proper calibration, much more can be extracted from this screen.

We tested the factory colours in the iFFALCON U85X model in “Film” mode, which is definitely the most accurate among all available settings, although it is still far from perfect. The main issue that catches the eye in both SDR and HDR content is the improper white balance – an excess of blue and red contributes to a slight purple tint in the image, detracting from the naturalness of the film scenes. An even greater challenge is how the television manages its brightness. Analysing the gamma chart for SDR signal, we noticed significant instability: instead of adhering to the standard value of 2.4, the device oscillates around 2.2, then suddenly makes an unnatural jump to around 3.0. In practice, this leads to confusing effects – large, bright surfaces on the screen appear too dark, while smaller elements are unnecessarily brightened. A similar characteristic can be found in the EOTF curve, which makes the image unpredictable and loses its cinematic authenticity.

After carrying out the calibration, we managed to bring the white balance into order and eliminate the earlier shortcomings in shades of blue. As a result, the picture no longer looked like it had a slight yellowish filter – the whites are cleaner, and the whole thing presents itself much more naturally. We also managed to tame the brightness characteristic in HDR content to some extent. The television now handles maintaining detail in blacks much better and does not lose them as much as before. However, when we look at the EOTF curve and how the QN990F reproduces brightness in films, it is evident that it still tends to accentuate details in dark areas more strongly. This is a characteristic feature of Mini-LED technology and, more specifically, how it is managed by the QN990F, which is practically impossible to eliminate completely. Despite this, after calibration, the picture looks significantly more natural, mainly due to the correct exposure of white light. The final effect is definitely more pleasant to the eye and closer to what we expect from a flagship television.

After professional calibration of the movie mode, we must admit that the effect is more than satisfactory – the iFFALCON U85X undergoes a true transformation here. Colour errors in SDR content have dropped to a level below 2, making them practically undetectable to the human eye. We managed to set the white balance almost perfectly, and brightness management (gamma) has become almost exemplary. As a result, with standard quality materials, the television simply looks perfect and it's hard to fault it.

In the case of HDR signal, the situation has also improved significantly, although here the nature of the device is a bit more noticeable. Colour errors have been reduced to around 3, which is an outstanding result in this price range. It's worth taking a look at the EOTF chart (available on the right side of the screen in filters: 4K HDR, gamma / EOTF) to see what is not immediately apparent regarding brightness management by the U85. Though the reference line looks decent, in actual film scenes the television still interprets the signal “in its own way” due to very aggressive local dimming zone algorithms. Does that disqualify this model for watching HDR content? Absolutely not. It’s simply a typical issue with nearly every Mini-LED that has to balance high brightness with the attempt to maintain deep blacks. One just needs to be aware of these technical limitations, which are unavoidable in this segment.

The QN990F deserves the highest praise for its upscaling capabilities. The processor responsible for 'lifting' classic TV to 8K resolution does a really decent job. Watching footage in 576p, we had no illusions that we would suddenly see a miraculous transformation like in an advertisement, where the image magically turns into crystal-clear 8K. Nevertheless, the final effect was surprisingly good; the picture looked clean and sharp. It's just a shame that the TV, like most Samsung models, has an overscan issue, which slightly cuts off the edges of the screen from the left side.

When it comes to image processing, Samsung offers a feature called "noise reduction," which in theory should improve tonal transitions in older materials, where they are usually more noticeable. Unfortunately, here we felt quite disappointed. The feature performs poorly – it struggles with unwanted banding and can even introduce its own artifacts. On the plus side, it’s worth noting that the TV doesn’t remove film grain when using this feature, but in practice, that’s a poor consolation when the noise reduction itself turns out to be practically useless.

When it comes to scaling images to 4K resolution, the iFFALCON U85X performs solidly. The device effectively boosts low-quality signals, making even older materials look clean and clear on the 4K panel. At extremely low resolutions, such as 480p, you can notice slightly jagged edges (especially on thin lines), but let’s be honest – this is a scenario you'll only encounter while watching very old recordings, so in everyday use, it’s not a real issue.

On the other hand, the digital processing aimed at smoothing tonal transitions performs significantly worse. Although the menu features a function called “Gradual Smoothing”, its effectiveness is at least debatable. In practice, it does not effectively eliminate banding (colour stepping) and, worse yet, can cause more harm than good. This filter can be too aggressive where it shouldn’t be, artificially smoothing out details that shouldn’t be touched, such as the natural texture of the face or the fine details of skin texture. Instead of improving quality, this function can give the image an unnatural, “plastic” look, so it’s best to use it with caution or, preferably: leave it turned off.

QN990F can easily be called one of the fastest TVs in the world. In 4K mode, it can display images at a frequency of up to 240 Hz, which until now was more associated with gaming monitors than with living room TVs. However, in everyday viewing, what's more important is how it handles an 8K signal at 120 Hz – and it performs very well here too. Motion remains smooth, and the TV handles even the most demanding content without breaking a sweat. Additionally, there's the motion smoother, or "Image Clarity." Thanks to this, you can adjust the picture to your preferences – leave it slightly cinematic with a bit of judder or switch to maximum smoothness, which works brilliantly for things like sports broadcasts.

Unlike budget constructions that can resemble a slideshow in dynamic sports scenes, the iFFALCON U85X is a heavyweight player equipped with a panel featuring a native refresh rate of 144Hz. It's worth remembering that in the realm of movies, series, or sports, we'll predominantly operate at 120Hz due to the specifics of image enhancement systems. Such a fast panel is excellent news for gamers and sports fans, as it opens the door to advanced motion settings that simply aren't available in cheaper 60Hz models.

Everything is managed from the menu “Motion Clarity”, where instead of using ready-made, often overly aggressive modes, we strongly recommend a custom configuration based on two sliders. The most important of these, Flicker Reduction, is responsible for fluidity in films – here, it's best to aim for a value around 4, which helps maintain the natural, cinematic character of motion without falling into the artificial “soap opera effect.” Meanwhile, the first slider, Motion Blur Reduction, is key to success in sports broadcasts. In this case, it's worth going all out and setting it to maximum, ensuring that the image remains sharp during fast-paced action on the field, while annoying ghosting is eliminated.

It has to be said straightforwardly – the QN990F is one of those televisions that scream they were designed with gamers in mind. Samsung has been developing its gaming solutions for years, but here we have a true package. Sure, it lacks Dolby Vision support in games, which is a downside that will always come up in discussions. However, aside from that, the list of features is truly impressive. To start, we have the Game Bar – a handy menu that allows you to quickly check and change game-related settings. You can see things like VRR enabled, frame rate, or aspect ratio settings there. It's like a little “dashboard” so you don’t have to dig deep into the menu to fix something. Since the word VRR was mentioned: yes, variable refresh rate is present here and works flawlessly. Plus, there's ALLM, which automatically switches the television to game mode as soon as the console is turned on. These may seem like small details, but together they make using the QN990F simply convenient and hassle-free.

However, the greatest impression comes from the number of ports. Four wireless HDMI 2.1 ports as standard is already great news, as there's no need to choose whether to connect the console, the receiver, or maybe even the PC. There's comfortably enough room for everything here. And if we add another micro HDMI (which we recommend connecting directly to the console), hidden within the casing, then in practice we have five inputs in full 2.1 standard. Let’s also add support for high refresh rates – 120 Hz in 8K or even 240 Hz in 4K – and we get a television that not only keeps up with the new consoles but also feels ready for consoles that aren’t even out yet.

iFFALCON U85X is an outstanding piece of gear for gamers that has pretty much everything you could ask for from a modern screen for console or PC. It features two full-fledged HDMI 2.1 ports with a full bandwidth of 48 Gbps, which opens the door to key technologies such as VRR and ALLM, ensuring smooth gameplay without screen tearing and with minimal lag. The TV effortlessly handles high refresh rates at various resolutions, and a real curiosity is the mode that allows for up to 240Hz when dropping down to Full HD quality. Everything is managed by the Game Bar (which is a faithful copy from TCL), allowing for instant switching of picture modes, personalization of the interface appearance, or even adding a virtual crosshair in the middle of the screen.