Samsung QN990F vs Hisense UR8S

Samsung QN990F is one of the bright televisions, and this is immediately apparent in tests. In measurements, it achieved around 1300 nits, which in practice allows you to enjoy films as their creators intended. Bright scenes have the right strength, lights shine, and the impression is truly cinematic. In standard test patterns, sequences number 1, 3, and 5 performed the best – there, brightness remained around 800-1000 nits, and the image looked very natural. In more difficult segments, it could dip to around 600 nits, but the level was still sufficient for details to be clearly visible. However, it should be added that with such highly contrasted shots, the halo effect returns – the same one we mentioned regarding blacks. Bright elements can leave a glow on dark backgrounds, and this is immediately noticeable. As we are dealing with a QLED, the colour palette is expanded, and the colours present themselves impressively. The problem is that with such a flagship model, we expected better numbers. 91% coverage of DCI-P3 and about 67% BT.2020 are results that can be considered solid but not outstanding. This gives an image that is vibrant and appealing; however, the competition in this and lower price ranges can show even more.

UR8S is a higher-end Mini-LED, so you could expect plenty of brightness. Indeed, on a synthetic test pattern peak brightness reached about 2200 nits. That’s a very good result, but as always what the TV does in normal film scenes matters much more. Here the results are a bit more mixed. In bright scenes with lots of light on screen, the UR8S can deliver very strong HDR. Brightness then gets up to around 1500 nits, so the image is very intense and has a lot of punch. It’s worse with small bright elements on a dark background. The TV noticeably dims them to preserve deep blacks and avoid excessive blooming. As a result, things like single stars or small specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost — sometimes it sacrifices the brightness of small details too much in favour of contrast.

Colours

For RGB Mini-LED TVs, colours should be evaluated a little differently than usual. If we look only at the panel’s capabilities, the UR8S performs excellently. We measured about 94% coverage of BT.2020 and virtually full DCI-P3. Those are among the highest figures currently seen in LCD TVs, and this is where the potential of the RGB backlight is most apparent. The problem is that this potential isn’t always used in real scenes. When we ran the same measurements on patterns overlaid with a film-like background, saturation of some colours started to fall noticeably. Individual zones can’t always control the three RGB components with the same precision when the scene becomes more complex. It’s most noticeable with blue and magenta. On simple test patches they can look very strong, but in tougher scenes samples of those colours clearly shrink. In other words, the UR8S has huge potential, but the TV can’t always take full advantage of it in every scene.

We tested the QN990F in Filmmaker mode, which is the best out-of-the-box setting available. Right from the start, we noticed a few significant issues. The biggest problem was with white balance. Due to too little blue, as well as incorrect ratios between red and blue, the image—especially in scenes with a lot of white—appeared too yellow, and at times even orange. On the Color Checker palette, these errors didn't look dramatic as they hovered around a value of 4, but in everyday viewing, especially with strong whites, they were most noticeable. We also noticed problems with brightness management—the TV struggled to maintain details in the smallest parts of the image, mainly due to how it manages backlight zones. Fortunately, Samsung provides plenty of room for adjustment when it comes to setting corrections. We know that with proper calibration, much more can be extracted from this screen.

For evaluating the factory colours we used Filmmaker mode, which is supposed to show the image as close as possible to how the content was prepared. And if you look at the white balance alone, the UR8S performs quite well. There’s no strong tint that immediately jumps out, although as brightness increases a bit too much blue and red start to appear, with a corresponding lack of green. Colour errors are therefore visible in measurements, but the image itself doesn’t look bad.

We have much bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the picture loses some depth. A similar tendency is visible in HDR. The EOTF curve sits above the reference value for a large part of the range, so the UR8S again brightens the image more than it should. This isn’t a case of the TV lacking brightness, because it has plenty, but of how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

After carrying out the calibration, we managed to bring the white balance into order and eliminate the earlier shortcomings in shades of blue. As a result, the picture no longer looked like it had a slight yellowish filter – the whites are cleaner, and the whole thing presents itself much more naturally. We also managed to tame the brightness characteristic in HDR content to some extent. The television now handles maintaining detail in blacks much better and does not lose them as much as before. However, when we look at the EOTF curve and how the QN990F reproduces brightness in films, it is evident that it still tends to accentuate details in dark areas more strongly. This is a characteristic feature of Mini-LED technology and, more specifically, how it is managed by the QN990F, which is practically impossible to eliminate completely. Despite this, after calibration, the picture looks significantly more natural, mainly due to the correct exposure of white light. The final effect is definitely more pleasant to the eye and closer to what we expect from a flagship television.

Hisense offers quite a lot of calibration options, and in SDR you can achieve a really good result with them. After adjustment the white balance is practically even across the whole range, and colour errors fall to very low values. The UR8S can be set very precisely here. HDR looks a little different. The white balance can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. Most interesting, however, is the behaviour of the EOTF curve. Even after correctly setting it on test patterns, the UR8S can still interpret brightness in its own way when watching films. Depending on the scene, parts of the picture are slightly brightened and others darkened compared with how they should look. This shows that the algorithms controlling the backlight have quite a large influence on the final image. Calibration therefore allows colours to be improved very well, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

The QN990F deserves the highest praise for its upscaling capabilities. The processor responsible for 'lifting' classic TV to 8K resolution does a really decent job. Watching footage in 576p, we had no illusions that we would suddenly see a miraculous transformation like in an advertisement, where the image magically turns into crystal-clear 8K. Nevertheless, the final effect was surprisingly good; the picture looked clean and sharp. It's just a shame that the TV, like most Samsung models, has an overscan issue, which slightly cuts off the edges of the screen from the left side.

When it comes to image processing, Samsung offers a feature called "noise reduction," which in theory should improve tonal transitions in older materials, where they are usually more noticeable. Unfortunately, here we felt quite disappointed. The feature performs poorly – it struggles with unwanted banding and can even introduce its own artifacts. On the plus side, it’s worth noting that the TV doesn’t remove film grain when using this feature, but in practice, that’s a poor consolation when the noise reduction itself turns out to be practically useless.

The big plus of the UR8S is its use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model’s stronger points. The TV handles smoothing tonal transitions very well, especially with poorer-quality material. The feature responsible for this effect works effectively without overprocessing the picture. Even on a medium setting it can noticeably reduce visible banding and artefacts without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t over-sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

QN990F can easily be called one of the fastest TVs in the world. In 4K mode, it can display images at a frequency of up to 240 Hz, which until now was more associated with gaming monitors than with living room TVs. However, in everyday viewing, what's more important is how it handles an 8K signal at 120 Hz – and it performs very well here too. Motion remains smooth, and the TV handles even the most demanding content without breaking a sweat. Additionally, there's the motion smoother, or "Image Clarity." Thanks to this, you can adjust the picture to your preferences – leave it slightly cinematic with a bit of judder or switch to maximum smoothness, which works brilliantly for things like sports broadcasts.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so right away it offers very strong potential for smooth motion. The panel itself performs really well, although some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but during faster motion, especially on darker backgrounds, it can still be noticed, particularly if you compare the same image to OLED TVs.

It has to be said straightforwardly – the QN990F is one of those televisions that scream they were designed with gamers in mind. Samsung has been developing its gaming solutions for years, but here we have a true package. Sure, it lacks Dolby Vision support in games, which is a downside that will always come up in discussions. However, aside from that, the list of features is truly impressive. To start, we have the Game Bar – a handy menu that allows you to quickly check and change game-related settings. You can see things like VRR enabled, frame rate, or aspect ratio settings there. It's like a little “dashboard” so you don’t have to dig deep into the menu to fix something. Since the word VRR was mentioned: yes, variable refresh rate is present here and works flawlessly. Plus, there's ALLM, which automatically switches the television to game mode as soon as the console is turned on. These may seem like small details, but together they make using the QN990F simply convenient and hassle-free.

However, the greatest impression comes from the number of ports. Four wireless HDMI 2.1 ports as standard is already great news, as there's no need to choose whether to connect the console, the receiver, or maybe even the PC. There's comfortably enough room for everything here. And if we add another micro HDMI (which we recommend connecting directly to the console), hidden within the casing, then in practice we have five inputs in full 2.1 standard. Let’s also add support for high refresh rates – 120 Hz in 8K or even 240 Hz in 4K – and we get a television that not only keeps up with the new consoles but also feels ready for consoles that aren’t even out yet.

In terms of gamer features the UR8S stacks up really well. The TV supports virtually everything you'd expect from a modern console or PC display. It has ALLM, VRR, and 4K at 120 Hz. There's also Dolby Vision in game mode, so when using, for example, an Xbox Series X you don't have to give up that HDR format. PC gamers get even more options. The panel can run at 4K and 180 Hz, and dropping to Full HD can push the refresh rate as high as 330 Hz. There's also a Game Bar that lets you quickly view key info and change gaming-related settings. The only real shortcoming is a proper implementation of HGiG. When enabled, the TV still interferes with HDR brightness mapping, so we don't get the effect intended by that standard. Apart from that, the UR8S is very well equipped for both consoles and a powerful PC.