Samsung QN90F / QN92F vs Philips PUS7000

Samsung QN90F can really shine with brightness. In our measurements, it reached even over 2200 nits, which directly translates to the viewing experience. In practice, this means that when a very bright scene appears in a film – for example, a sunrise in The Meg – the screen looks as if natural light is actually shining on us. This isn't just a number from a table, but a real sense of image intensity! However, the TV can't always deliver its full power. With smaller details, such as spotlights or lamps, brightness drops to 500–700 nits. This is a deliberate decision by the algorithms – by doing this, the contrast between large and small elements is better controlled, and the image doesn't lose balance. Importantly, this is still a huge improvement compared to last year's QN90D, where similar details were almost invisible, shining at just 200 nits. Here, the HDR effect is much more cohesive and credible. The only downside is the colours. The coverage of the DCI-P3 spectrum has plateaued at 91%, which can be considered a rather average result in this price range.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The colour reproduction in the QN90F was tested in Filmmaker mode and, as is usually the case with Samsung TVs, this mode proves to be the best starting point straight out of the box. However, this does not mean that we are dealing with an image free of flaws. The white balance in SDR and HDR content was surprisingly good – colours didn't drift in any direction and even in its factory settings it looked solid. However, a problem arose with the gamma and EOTF curves, which determine how the TV manages brightness. Here, the QN90F significantly brightened the entire image, causing the black levels and colours to lose their intensity, and the overall effect resembled that of an applied milky filter. Fortunately, Samsung, unlike many competitors in the miniLED world, provides users with plenty of tools to control settings that we won't find in other manufacturers, such as Chinese brands. Therefore, we decided to see if we could squeeze the full potential out of the QN90F because we know that such a high series is capable of much more.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

After our adjustment of the settings, the QN90F showed what it’s really capable of – and we have to admit, it’s one of the best images we’ve seen on a miniLED screen this year. As we mentioned earlier, the white balance wasn’t a big issue even in the factory settings, but it was only after gamma calibration that we were able to get close to reference values. The same goes for HDR content, where the EOTF curve post-adjustment presents mature and consistent results. Indeed, in some films, you can notice that the smallest elements of the image are slightly brightened, and with a limited number of local dimming zones, there's still a risk of halo effect. However, it’s important to remember that such phenomena are characteristic of all miniLED TVs and it’s difficult to expect miracles even from the QN90F. The most important thing is that after calibration, the television displays an image that confidently competes with many OLED screens available on the market in terms of expressing the director's vision.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

QN90F handles upscaling very well. Materials in lower resolutions, even SD, are enhanced to a clear and sharp image, where a lot of background detail can be seen. This is a big advantage, as the TV makes older content or everyday television look significantly better than on most budget screens. However, the issue of overscan remains, which is the cropping of the screen edges that cannot be turned off on Samsungs. This can cause some subtitles on the screen to disappear or Auntie's face from the wedding on a VHS tape to be slightly cropped. 😉

The digital image processing also performs well. In the menu, we find a feature called "noise reduction," which can smooth tonal transitions and improve the viewing of lower quality materials, such as those from YouTube. In the medium setting, the effect is most beneficial – it doesn't heavily interfere with details while simultaneously eliminating the problem of "banding" in colours. However, it's worth noting that the feature can be quite aggressive and removes natural film grain in older movies, so it's best to use it sparingly.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

QN90F has been equipped with a panel that has a maximum refresh rate of 165 Hz, and while this advantage will mainly be appreciated by PC gamers, it’s still worth highlighting. In movies or sports broadcasts, we are limited to the classic 120 Hz, but this is not a cause for concern. In practice, the additional motion smoother is more significant here. Thanks to the "Motion Clarity" setting, we can adjust the picture to our own preferences. The blur reduction option is responsible for fluidity and ghosting in sports. Meanwhile, the "judder reduction" function improves motion fluidity in productions recorded at 24 frames, namely films and series. If we set it high, the film looks smoother and more fluid than it was actually shot. Lower values, on the other hand, preserve its cinematic "rawness" with the visible film frame.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

QN90F has almost everything to become the perfect TV for gamers. Things like four HDMI ports, VRR, ALLM, or refresh rates reaching up to 165 Hz need no reminder. The Game Motion Plus mode deserves a big thumbs up, which is the proprietary motion smoothing technology for games. With it, you can add a few 'artificial' frames and make the image generated from the console look smoother than it should. This is a very unique solution in the world of TVs – competing systems usually do not offer this – and that's why Samsung has had a strong selling point among gamers for years, even despite the lack of support for the still niche Dolby Vision in games.

[UPDATE] We have updated our tests of Samsung TVs from the 2025 range due to the release of firmware version 1131, which restored the crucial HGiG feature for gamers.

So why do we refer to it as an 'almost' perfect screen? Unfortunately, just like in recent Samsung models, we've noticed a problem with the lack of HGiG functionality. This is a solution that allows the TV to leave control over tone mapping to the console, so that games look exactly as the creators intended. Worse still, this feature was previously present and disappeared after software updates. Instead of minor fixes, we got a step backward. It's a shame, because if it weren't for this lack, the QN90F could have been a truly ideal choice for gamers in the miniLED category.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.