Samsung QN80H vs Sony BRAVIA 7 II

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000‑nit mark, which on paper already promises a solid HDR effect. In practice the screen really shows its stuff, although it can't always fully spread its wings (or its backlight 🤔). The best impression comes from bright, wide shots. Sunlit landscapes or heavily lit scenes look really good on it. Brightness then sits around 700 nits, which delivers a noticeable step up compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim those aggressively to protect black depth at all costs. On one hand you get better contrast, on the other... you lose dynamics and the sparkle of fine HDR detail. The TV therefore has plenty of potential, but the local‑dimming algorithm can be too restrictive.

Colour‑gamut coverage

Colour-wise it’s also good. The QN80H uses quantum‑dot technology, and in our measurements it covered 93% of the DCI‑P3 colour space and about 70% of BT.2020. Those results won't drop anyone's jaw today, but in real‑world use they’re more than enough to deliver a vivid and natural picture for most films and series. Colours are suitably saturated and, after proper tuning, they don't look artificial or overly aggressive.

Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode for watching, Professional, we measured about 2,000 nits of peak brightness, so the panel’s capabilities are truly large. Of course, in Mini-LED sets a test-pattern result is only part of the story, because much still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform really well. Depending on the scene, the brightness we measured in films ranged from about 1,100 to as much as 1,700 nits. That’s a level at which HDR has proper punch and bright highlights can be genuinely impressive. It’s not perfect in every situation. With small bright elements on a very dark background, the Bravia 7 II clearly prioritises maintaining good black levels, so their brightness can fall to around 500 nits. It still looks good, but it’s clear the TV doesn’t always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is where True RGB was meant to deliver one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured roughly 98% DCI-P3 coverage and 88% BT.2020, so the potential for showing highly saturated colours is substantial. In RGB TVs the matter is a bit more complex. When we repeated the same measurements with a film-like background applied, gamut coverage dropped to about 92% DCI-P3 and 78% BT.2020. Those are still good numbers, especially for an RGB Mini-LED TV, but they show that the final result largely depends on how the algorithms drive the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain strong saturation. The biggest differences are visible in blue shades, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primaries. True RGB therefore offers genuinely greater potential, but, as with brightness, a lot depends on what’s actually happening on screen.

The QN80H’s factory settings performed really well, especially compared with most TVs that come through our tests. Of course we took measurements in Filmmaker Mode, and that’s the mode we recommend switching on right after the initial setup. For SDR content our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to spot without test equipment. The only weaker point was the gamma. In brighter parts of the picture the TV brightened them a little too much, so the image sometimes lost some depth. Even so, we wish most TVs looked this good straight out of the box.

It was a bit worse in HDR. The white balance was still set correctly, so the issue wasn’t colour but the way the QN80H managed image brightness. You could see that straight away on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, very small highlights were often dimmed too much at the same time. As a result some fine details simply disappeared. The factory Filmmaker mode in HDR isn’t bad, but it’s definitely not as well tuned as it is in SDR.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available presets. It's not perfect. In SDR the white balance is slightly biased toward magenta, so some scenes look a little warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. As a result the image is a bit too dark in places, especially in the mid-tones. In HDR the situation is better. As brightness increases there's a little too much red, but it isn't something that really jumps out while watching. Overall the Professional mode is a good starting point, though you can get a bit more out of it with calibration.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we were able to rein in how the QN80H handled brightness; it had been making most scenes too bright. After calibration the picture is calmer, more natural and much closer to a faithful reproduction.

After calibration the Bravia 7 II can look significantly better. First and foremost, we managed to set the white balance very well in both SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users those changes will have the biggest impact on the picture. There is, however, a limitation with the colours themselves. On the Bravia 7 II Sony does not provide access to a traditional CMS that would let us adjust individual hues separately. Much is left to the algorithms controlling the True RGB backlight. If the TV reproduces a specific colour inaccurately, we are not always able to do anything about it. In our measurements this is most apparent in parts of the reds and blues, where errors can still be quite large. That does not, however, undermine the value of calibration. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference from the factory settings is noticeable.

The digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we've already seen in previous Samsung models and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without making it feel like the TV is trying to forcibly enhance the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, especially in low-bitrate streaming. However, you should remember it doesn't work without side effects. It can remove some film grain and slightly smooth the picture. So with a good-quality source we'd leave this feature turned off. If, however, banding and uneven tonal transitions bother you more than the loss of some grain, "Noise Reduction" can be a really useful addition.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of Sony's biggest advantages over the competition. Sony has for years excelled at digital image processing, and it's clear here too. Above all, the 'Smooth Gradation' function works very well, smoothing weaker tonal transitions in poorer-quality content. The safest setting is low, but we'd comfortably recommend medium as well. The effect is stronger, and the TV still handles fine detail very delicately. Some minor details may be slightly smoothed, but Sony does it much more subtly than many other brands. Upscaling is also very good. Lower-resolution content is nicely upscaled to 4K; the image looks clean and retains a lot of detail. Of course the TV won't magically turn native HD into true 4K, but the Bravia 7 II does very well with what can be pulled from such a source.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes the image at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach up to 240 Hz. That's new for Samsung TVs and a handy extra for people who want to use the TV for PC gaming. We were more interested, though, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. It does very well. The panel doesn't suffer much from the smearing typical of VA panels; faint trails behind moving objects are mostly visible on dark backgrounds. That's not something that would interfere with normal sports watching or gaming. The TV also has a motion smoothing system that Samsung calls "Picture Clarity". You can set judder reduction and blur reduction separately, so it's easy to tune it for films, sport or your own preferences.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you'd expect from a TV of this class. With sport or games at 120 fps the picture is suitably smooth, and for films Sony provides an advanced motion interpolation system. You can therefore adjust the level of interpolation separately and choose whether to retain a more cinematic motion or achieve noticeably greater smoothness. Motion blur itself is a bit worse. The VA panel used isn't among the fastest, and moving objects can show a slight trailing, especially against darker backgrounds. It's not at a level that will seriously disturb normal viewing, but last year's Bravia 7 was better in this regard and had a noticeably faster panel.

The Samsung QN80H is a TV that performs very strongly when it comes to gamer-focused features. The biggest new feature for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still investing heavily in the gaming side of its TVs. The list of advantages doesn't end there. The QN80H has four full HDMI 2.1 ports, which at this price point still isn't standard. So you can connect multiple consoles, a PC or a soundbar at once and not worry about which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which could matter especially for Xbox Series X owners. However, this isn't a flaw that rules the QN80H out as a gaming TV. Samsung does have a feature that most manufacturers still lack, namely its proprietary motion smoothing, Game Motion Plus. This motion smoother also works in game mode, improving the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby's codec, especially in more demanding games that don't offer a 60 fps mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped gaming TVs in its class.

Bravia 7 II has pretty much everything you'd want from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to low-latency mode. HGiG works correctly, so once you configure HDR on the console the TV won't try to brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Another plus is Dolby Vision in game mode, which will be especially useful for Xbox owners. Sony also includes its own Game Menu, where you can quickly view key signal info, check VRR or change gaming settings without digging through the full TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz. Our biggest complaint is not really about the features but the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 with 48 Gbps bandwidth. One of those is also the eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you only have one full HDMI 2.1 left for a console or PC. With a single console that's fine, but with a PS5, an Xbox and an audio setup it starts to feel cramped. That's hard to justify from Sony. In cheaper TVs two HDMI 2.1 ports can still be accepted, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.