Samsung QN80H vs LG OLED B6

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000‑nit mark, which on paper already promises a solid HDR effect. In practice the screen really shows its stuff, although it can't always fully spread its wings (or its backlight 🤔). The best impression comes from bright, wide shots. Sunlit landscapes or heavily lit scenes look really good on it. Brightness then sits around 700 nits, which delivers a noticeable step up compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim those aggressively to protect black depth at all costs. On one hand you get better contrast, on the other... you lose dynamics and the sparkle of fine HDR detail. The TV therefore has plenty of potential, but the local‑dimming algorithm can be too restrictive.

Colour‑gamut coverage

Colour-wise it’s also good. The QN80H uses quantum‑dot technology, and in our measurements it covered 93% of the DCI‑P3 colour space and about 70% of BT.2020. Those results won't drop anyone's jaw today, but in real‑world use they’re more than enough to deliver a vivid and natural picture for most films and series. Colours are suitably saturated and, after proper tuning, they don't look artificial or overly aggressive.

LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year's B5. That's down to LG Display's new budget OLED SE panel. In practice this simply provides a bit more headroom and makes HDR look fuller in many scenes than on last year's lower-end OLEDs. That doesn't mean the B6 has no limitations. In very bright shots, when a large part of the screen is brightly lit, brightness can fall below 400 nits. This behaviour is typical of OLED TVs (especially in this segment), and it's then you see the biggest difference compared with pricier models. All the same, we rate the B6's results as really solid. It's still not a TV built to break brightness records, but the HDR effect is strong enough that films really feel like a step up from ordinary SDR picture.

Colour gamut

Using the OLED SE panel has had some impact on wide colour-gamut coverage. Compared with last year's model the figures have dropped by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn't mean the colours on the LG B6 are weak. In most films and TV series they look vivid, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD-OLED panels. This is due to the WOLED panel structure. In addition to the red, green and blue subpixels it also uses a white subpixel that helps boost brightness. This comes at a cost: at very high luminance some of the colour is effectively 'diluted' by the white light, so saturation of some hues can be slightly lower. Day-to-day it's not a big problem, but you can see it in the most demanding scenes.

The QN80H’s factory settings performed really well, especially compared with most TVs that come through our tests. Of course we took measurements in Filmmaker Mode, and that’s the mode we recommend switching on right after the initial setup. For SDR content our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to spot without test equipment. The only weaker point was the gamma. In brighter parts of the picture the TV brightened them a little too much, so the image sometimes lost some depth. Even so, we wish most TVs looked this good straight out of the box.

It was a bit worse in HDR. The white balance was still set correctly, so the issue wasn’t colour but the way the QN80H managed image brightness. You could see that straight away on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, very small highlights were often dimmed too much at the same time. As a result some fine details simply disappeared. The factory Filmmaker mode in HDR isn’t bad, but it’s definitely not as well tuned as it is in SDR.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes give very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is a far better starting point than Vivid or Eco, where the picture is heavily boosted and noticeably less natural. For SDR content the factory settings perform really well. Colour errors are small, gamma behaves correctly, and the picture looks natural during regular viewing and does not seem overly enhanced.

It's a bit worse with HDR. Once you start playing that kind of content it's quickly apparent the white balance isn't perfectly set. Too much blue and red makes the image take on a slightly pink tint. Colour gamut measurements and the ColorChecker confirm this, with samples clearly shifting in that direction. It's not a defect that completely ruins the picture, but you can notice it with HDR films. So anyone who wants the most faithful image should consider calibration, which we cover later in the review.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we were able to rein in how the QN80H handled brightness; it had been making most scenes too bright. After calibration the picture is calmer, more natural and much closer to a faithful reproduction.

During calibration we focused mainly on HDR material, because that’s where the factory settings needed the most correction. We didn’t neglect SDR, though. After tuning it was brought almost to perfection. Colours are very accurate and brightness is controlled as it should be. The biggest change in HDR came from improving the white balance. After removing excess red and blue the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colours that had previously leaned towards pink improved. After calibration most errors fell below Delta E 2-3, the threshold at which an average viewer stops noticing differences with the naked eye. So the LG B6 can produce a very accurate picture, especially for the manufacturer’s entry-level OLED model.

The digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we've already seen in previous Samsung models and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without making it feel like the TV is trying to forcibly enhance the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, especially in low-bitrate streaming. However, you should remember it doesn't work without side effects. It can remove some film grain and slightly smooth the picture. So with a good-quality source we'd leave this feature turned off. If, however, banding and uneven tonal transitions bother you more than the loss of some grain, "Noise Reduction" can be a really useful addition.

LG B6 copes very well with lower-quality material. Much of that is down to effective digital image processing, which can mask some source imperfections without excessively smoothing the whole scene. The "Smooth Gradation" feature proves particularly useful. It lets you noticeably reduce posterization mentioned earlier, especially in dark parts of the image. The safest choice is to set it to Low or Medium. The feature still effectively smooths out harsh tonal transitions, but doesn't yet interfere too much with fine details. Die-hard purists can of course leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a fair amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations are only noticeable with very poor sources below 720p, where the smallest text and fine elements aren't always perfectly sharp, but this is true for almost every other TV on the market.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes the image at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach up to 240 Hz. That's new for Samsung TVs and a handy extra for people who want to use the TV for PC gaming. We were more interested, though, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. It does very well. The panel doesn't suffer much from the smearing typical of VA panels; faint trails behind moving objects are mostly visible on dark backgrounds. That's not something that would interfere with normal sports watching or gaming. The TV also has a motion smoothing system that Samsung calls "Picture Clarity". You can set judder reduction and blur reduction separately, so it's easy to tune it for films, sport or your own preferences.

One of the biggest advantages of OLED panels is their very fast pixel response time. That keeps the picture sharp and prevents visible smearing that often appears on LCD TVs. It does have a downside, though. During slow camera pans motion can look a bit choppier than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 this is easy to tame with TruMotion. With the motion smoothing set correctly you can get smoother motion without giving the picture an exaggerated soap-opera effect.

The Samsung QN80H is a TV that performs very strongly when it comes to gamer-focused features. The biggest new feature for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still investing heavily in the gaming side of its TVs. The list of advantages doesn't end there. The QN80H has four full HDMI 2.1 ports, which at this price point still isn't standard. So you can connect multiple consoles, a PC or a soundbar at once and not worry about which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which could matter especially for Xbox Series X owners. However, this isn't a flaw that rules the QN80H out as a gaming TV. Samsung does have a feature that most manufacturers still lack, namely its proprietary motion smoothing, Game Motion Plus. This motion smoother also works in game mode, improving the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby's codec, especially in more demanding games that don't offer a 60 fps mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped gaming TVs in its class.

LG OLED B6 has plenty going for gamers; it's a complete base for the PS5, Xbox Series X/S or a solid PC. It comes with four full-size HDMI 2.1 ports with 48 Gb/s bandwidth, so you can forget about annoying cable swapping when you want to connect several newer devices at once. We get a full package of sync technologies, from classic VRR to G-Sync and FreeSync. The panel effortlessly syncs its refresh rate to the frame pacing produced by your console or graphics card. Of course ALLM is present: the B6 automatically recognises when a game is running and immediately cuts latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG means that after an initial calibration in the console settings the picture won't suffer from blown-out whites or lost detail in bright areas. The icing on the cake is the Game Bar. Instead of digging through the full menu mid-game, a single click lets you correct shadow visibility, tweak chosen parameters or simply check the display's current mode. All of this makes the LG B6 a great choice for gamers.