Samsung Q60D / Q67D / Q68D vs Samsung U8000F (IPS)

Television Samsung Q60D, regardless of the tested scene, achieves brightness levels above 500 nits, which is above average for this class of devices. Such a level of brightness allows for a taste of true home cinema, with clearly visible details in bright areas of the image and well-rendered contrast dynamics, especially when watching content from streaming platforms or films played from Blu-ray. This means that movie screenings gain greater depth and realism, particularly in well-lit scenes. Despite the use of quantum dot technology (QLED), the television does not achieve outstanding results in colour reproduction. The coverage of the DCI-P3 colour space is only 90%, which may be noticeable in more demanding scenes, where the richness and saturation of colours play a key role in image quality.

Better doesn't mean good – and that's exactly how you can sum up the capabilities of the U8092F when it comes to displaying bright movie scenes in HDR mode. The brightness of the panel is just under 250 nits, which is definitely too low to enjoy any light effects. An interesting situation was observed during measurements of the fourth scene from the movie Sicario 2 – the television clearly dimmed the entire screen in an attempt to achieve better black levels (which still remain weak). One could even suggest that the device employs some form of "global dimming," but unfortunately – the effects are still very poor. To make matters worse, the television does not support a wide colour gamut – the coverage of the DCI-P3 space is around 80%, so don’t count on truly vibrant colours. The HDR image here looks more like slightly brightened SDR, and that’s the approach we would suggest you stick to when it comes to this television.

Samsung has been offering a "Filmmaker" mode in its TVs for several years now, aimed at providing the most faithful picture settings straight from the factory, in line with the vision of filmmakers. This is certainly a big step towards cinematic quality at home, but it is worth noting that this mode is not without its issues.

For example, the white balance in both SDR and HDR modes exhibits an excessive amount of red, which makes the image too warm. As a result, the skin tones of actors and bright scenes can appear unnaturally flushed. The Colour Checker test further confirms this problem – colour samples often shift towards red hues, deviating from the neutral colour representation that would be more desirable in a professional setup.

When it comes to contrast, there is a noticeable strong drop at the beginning of the gamma graph, where values below 2.4 drop all the way down to 2.1. As a result, the image in darker scenes may appear less distinct, losing depth. In the case of HDR content, the EOTF curve (which is responsible for brightness reproduction) shows a strong spike at the beginning of the graph, which can lead to excessive brightness in the lighter parts of the image, disrupting the natural tonal balance.

Samsung U8000F has been tested in the best possible built-in picture mode on the television, which is Filmmaker Mode. This mode should – at least in theory – provide a cinematic, reference image without unnecessary enhancements. For SDR content (mainly HD/SD), the television presented itself surprisingly well out of the box. White balance errors hovered around a value of 3, which is roughly on the edge of perceptibility. The only criticism could be directed at brightness management – the gamma chart showed a slight tendency to brighten or darken certain sections, but overall it performs quite well for this price segment.

Unfortunately, it looks much worse in HDR mode. Although the white balance was not terrible, the television had significant colour errors – particularly evident on the Color Checker chart, where almost every sample fell outside the target point. The image in HDR simply looks unnatural, and the colours can be shifted, muted, or too cool. This largely stems from the fact that U8000F does not support a wide colour gamut (DCI-P3). The television is physically unable to display correct colours in the HDR standard – and this is unfortunately felt in every more demanding material.

After professional calibration of the Samsung Q60D television in film mode, users can enjoy a significant improvement in image quality. Samsung televisions have always offered 2- and 20-point grayscale adjustment and an advanced CMS (Colour Management System), allowing for precise colour and shade adjustments. The white balance for both SDR and HDR has been stripped of strong peaks and tendencies towards colour drifting into red tones, significantly enhancing the naturalness of the image. Although a few larger errors can still be observed in HDR mode, the overall quality of colour reproduction has been excellently improved. Regarding contrast, although drastic changes cannot be said due to the limitations of the television's technology, the improvement is noticeable. Thanks to calibration, details in dark scenes are more visible, and the differences between light and dark elements of the image have been enhanced. This makes the overall perception of the image more satisfying, allowing viewers to enjoy greater depth and realism in the displayed content.

Even though the U8000F already offered a fairly good picture in SDR straight out of the box, we managed to tweak it a bit more. We were able to remove a slight purple tint and adjust the gamma to a more reasonable level. However, the television still tends to over-brighten the smallest and brightest parts of the image – the gamma chart shows a characteristic "dip" that is hard to fully straighten out.

Unfortunately, the situation looks worse in HDR. It's difficult to talk about any significant improvement here – the television simply isn't designed for HDR content. We tried to adjust the picture in the advanced settings, but despite our efforts, the colour errors remained quite noticeable – a delta E above 7 is already significantly visible deviations. It's a bit unfortunate, but that's the charm of a budget build. In SDR, the U8000F performs reasonably, whereas HDR is simply not its league.

However, when it comes to processing and scaling lower quality materials, the television performs quite well. The image is rendered without overscan, which ensures full use of the available screen space. Additionally, the outlines of the model or branches of the tree are not overly jagged, resulting in a satisfactory quality of the displayed content. Although noise reduction could be more effective, the overall processing results of lower quality materials are positive and meet expectations.

When it comes to how the Samsung U8000F handles lower quality materials, we must admit that Samsung has made progress compared to its predecessor from last year – the DU7192 model, which theoretically occupies the same place in the offering.

This year's model has been equipped with a function to improve the smoothness of tonal transitions, which has been implemented significantly better than last year. Yes, the TV still uses quite strong algorithms that can distort details or remove film grain, but even so – it can be confidently said that it operates effectively.

However, not everything has gone perfectly. The U8000F has noticeable issues with slight frame stuttering when watching very old content in very low resolution. If someone plans to play their old VHS tape, they must be aware that the picture may appear slightly "choppy".

Samsung Q60D is equipped with a 60 Hz panel and a feature to enhance movie smoothness, known as "Motion Blur Reduction." This function aims to minimise motion blur and improve overall image fluidity, which will certainly appeal to users who primarily seek a television for watching movies and series. Thanks to this technology, viewers can enjoy a more fluid visual experience, even in dynamic action scenes where details are crucial. However, it is worth noting that while "Motion Blur Reduction" improves image fluidity in films, for gaming, this panel may not be the best choice due to its considerable motion blur effect, which can be seen in the photo below.

Samsung U8000F is equipped with a 60 Hz panel, so right from the start, it's clear that we shouldn't expect miracles. This is simply the standard in this class – sufficient for everyday viewing, but without any fireworks.

The television offers one motion smoothing slider – a feature called “Motion Blur Reduction”, which allows us to adjust the smoothness of the image in movies. Higher settings provide a more “theatrical” and smoothed effect, while lower ones maintain the original character of the film with a slight 24p effect. An interesting feature is “Clear Motion LED”, or BFI mode – which inserts black frames between the image frames to enhance motion clarity. However, in practice, the screen flickers significantly when it's activated, and it's better viewed as an experiment rather than something that truly enhances gaming comfort.

Samsung Q60D has been equipped with features such as ALLM (Auto Low Latency Mode), HGiG (HDR Gaming Interest Group) and Game Bar, which significantly enhance the gaming experience. However, the lack of HDMI 2.1 implementation limits its capabilities, preventing the use of VRR (Variable Refresh Rate), which could further improve smoothness and image quality. Generally, for casual gamers, this TV should perform well in everyday use, providing satisfactory gaming experiences. However, if we are more demanding in terms of gaming, it is worth considering models with a higher refresh rate and HDMI 2.1, which will ensure full functionality and better support for the latest games. In such cases, investing in a more advanced TV will yield significantly better results in terms of smoothness and image quality, which is crucial for gaming enthusiasts.

Samsung U8000F offers a basic set of features for gamers, which may still be sufficient for less demanding users. It has an automatic game mode – when a game is launched on the console, the TV automatically switches to low latency mode, which significantly improves response time. It also includes a VRR function, or variable refresh rate, which works within the range of 48 to 60 Hz. This means that both Xbox and PS5 won't produce the "tearing" effect – as long as we stay within this range.

And unfortunately, that's about it for the advantages. Additional features like Game Bar or higher refresh rates are reserved for higher models of Samsung’s 2025 line. In theory, the TV also supports the HGiG function, which should adjust the HDR image to the intentions of game developers. Unfortunately – although this function appears in brochures and store materials – its setup on the Xbox console turned out to be... impossible in practice.