Samsung Q60D / Q67D / Q68D vs Samsung DU7192 (VA)

Television Samsung Q60D, regardless of the tested scene, achieves brightness levels above 500 nits, which is above average for this class of devices. Such a level of brightness allows for a taste of true home cinema, with clearly visible details in bright areas of the image and well-rendered contrast dynamics, especially when watching content from streaming platforms or films played from Blu-ray. This means that movie screenings gain greater depth and realism, particularly in well-lit scenes. Despite the use of quantum dot technology (QLED), the television does not achieve outstanding results in colour reproduction. The coverage of the DCI-P3 colour space is only 90%, which may be noticeable in more demanding scenes, where the richness and saturation of colours play a key role in image quality.

On the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, such a value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this quality level might be acceptable but it is definitely not enough when it comes to HDR. Additionally, a DCI-P3 colour gamut coverage of 82% does not favour presenting HDR content in its full glory. The limited colour range makes it difficult for the television to reproduce vibrant and diverse hues, which is crucial for achieving a cinematic experience.

Samsung has been offering a "Filmmaker" mode in its TVs for several years now, aimed at providing the most faithful picture settings straight from the factory, in line with the vision of filmmakers. This is certainly a big step towards cinematic quality at home, but it is worth noting that this mode is not without its issues.

For example, the white balance in both SDR and HDR modes exhibits an excessive amount of red, which makes the image too warm. As a result, the skin tones of actors and bright scenes can appear unnaturally flushed. The Colour Checker test further confirms this problem – colour samples often shift towards red hues, deviating from the neutral colour representation that would be more desirable in a professional setup.

When it comes to contrast, there is a noticeable strong drop at the beginning of the gamma graph, where values below 2.4 drop all the way down to 2.1. As a result, the image in darker scenes may appear less distinct, losing depth. In the case of HDR content, the EOTF curve (which is responsible for brightness reproduction) shows a strong spike at the beginning of the graph, which can lead to excessive brightness in the lighter parts of the image, disrupting the natural tonal balance.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although it is the mode that most closely aligns with the creators' intent, it still has some imperfections. In the white balance graph for both SDR and HDR, there is a clear dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as large an impact on the perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious reservation. In the darkest parts of the image, it was too low, causing excessive brightening of those scenes, depriving the film of drama and contrast. In the case of HDR, the white balance remains at a similar level, but the EOTF curve graph draws attention. At the beginning, the curve noticeably bulges, leading to strong brightening of the darkest scenes. Then, the result sharply drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, needs refinement—especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

After professional calibration of the Samsung Q60D television in film mode, users can enjoy a significant improvement in image quality. Samsung televisions have always offered 2- and 20-point grayscale adjustment and an advanced CMS (Colour Management System), allowing for precise colour and shade adjustments. The white balance for both SDR and HDR has been stripped of strong peaks and tendencies towards colour drifting into red tones, significantly enhancing the naturalness of the image. Although a few larger errors can still be observed in HDR mode, the overall quality of colour reproduction has been excellently improved. Regarding contrast, although drastic changes cannot be said due to the limitations of the television's technology, the improvement is noticeable. Thanks to calibration, details in dark scenes are more visible, and the differences between light and dark elements of the image have been enhanced. This makes the overall perception of the image more satisfying, allowing viewers to enjoy greater depth and realism in the displayed content.

Even with its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of factory settings. We took on this task, and the results turned out to be more than satisfactory. The white balance, which previously exhibited a strong yellow tint in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We were also able to properly model the gamma in SDR content, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR content, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR content still struggles with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a full representation of the dynamics of HDR content. Nonetheless, after calibration, the image is clearly better and much closer to the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

However, when it comes to processing and scaling lower quality materials, the television performs quite well. The image is rendered without overscan, which ensures full use of the available screen space. Additionally, the outlines of the model or branches of the tree are not overly jagged, resulting in a satisfactory quality of the displayed content. Although noise reduction could be more effective, the overall processing results of lower quality materials are positive and meet expectations.

The tonal transition smoothing feature works in two modes – 'off' and 'auto'. Turning it off causes gradation issues, while the 'auto' mode provides smooth transitions, but at the cost of grain effect and details, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurry, and the edges of objects may contain artifacts. This limitation means the television performs better with higher resolution content.

Samsung Q60D is equipped with a 60 Hz panel and a feature to enhance movie smoothness, known as "Motion Blur Reduction." This function aims to minimise motion blur and improve overall image fluidity, which will certainly appeal to users who primarily seek a television for watching movies and series. Thanks to this technology, viewers can enjoy a more fluid visual experience, even in dynamic action scenes where details are crucial. However, it is worth noting that while "Motion Blur Reduction" improves image fluidity in films, for gaming, this panel may not be the best choice due to its considerable motion blur effect, which can be seen in the photo below.

Even though Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence makes the TV stand out against the competition in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sport. In the motion smoothing menu, we find, among other things, a "Vibration Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image retains the characteristic stutter known from material recorded at 24 frames per second, which means that this feature practically fails to fulfil its purpose.

Samsung Q60D has been equipped with features such as ALLM (Auto Low Latency Mode), HGiG (HDR Gaming Interest Group) and Game Bar, which significantly enhance the gaming experience. However, the lack of HDMI 2.1 implementation limits its capabilities, preventing the use of VRR (Variable Refresh Rate), which could further improve smoothness and image quality. Generally, for casual gamers, this TV should perform well in everyday use, providing satisfactory gaming experiences. However, if we are more demanding in terms of gaming, it is worth considering models with a higher refresh rate and HDMI 2.1, which will ensure full functionality and better support for the latest games. In such cases, investing in a more advanced TV will yield significantly better results in terms of smoothness and image quality, which is crucial for gaming enthusiasts.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected at this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technology. The TV offers only basic features for gamers – automatic switching to low-latency mode (ALLM), and support for basic HDR for games in HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines, however, the limited brightness of the TV does not allow full enjoyment of the effects that this standard offers. Unfortunately, there are no conveniences such as GameBar, which is increasingly common even in cheaper models and significantly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance the user experience, especially for those who frequently switch display modes.