SAMSUNG OLED S95F (QD-OLED) vs LG NANO81A / NANO80A

The new generation of QD-OLED panels in Samsung's S95F showcases its full potential, and the brightness results are simply astounding. In test film scenes, such as “Life of Pi” or “Sicario 2”, where smaller light elements appear – stars, the moon, or spotlights – the television managed to achieve over 2000 nits of brightness. This is a result that surpasses even most top Mini-LED models.

The secret lies in the technology itself – instead of a limited number of dimming zones like in Mini-LED televisions, here we have millions of glowing pixels, allowing the television to fully demonstrate its power without technological compromises. Of course, since it is still an organic panel, in scenes that are full-screen and flooded with white – like in the final sequence from The Meg – brightness drops to around 1400 nits. Nevertheless, the result remains excellent and definitely exceeds what any OLEDs, both QD-OLED and WOLED, have offered so far. The colour reproduction is also particularly noteworthy. Thanks to QD-OLED technology, the television achieves almost 100% coverage of the DCI-P3 colour space and around 80% in BT.2020. These values make HDR images not only dazzling in brightness but also stunning in their range of colours.

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

The best picture mode straight out of the box is undoubtedly Filmmaker Mode – a mode that Samsung has been using for several years and which is intended to faithfully convey the creators' vision. In SDR content, its implementation is not bad, although some imperfections can be noticed. The image is slightly dimmed, and the screen has a subtle pinkish hue resulting from an excess of red and blue in the white balance. Colour errors remained at a level of 3–4 ΔE units – and for the uninitiated: a value above 3 is the threshold where the average human eye starts to notice differences.

Much bigger problems arise in HDR content, however. Here, the white balance was not as much of an issue – a slight excess of blue did not significantly hinder things. The problem became brightness management. In practice, the TV "blows out" the image too much, causing details in the blacks to completely disappear. The final effect was far from what was expected, and the colour errors in this mode became quite significant. It’s hard to say why such a design decision was made, but it was clear that the factory HDR settings do not allow this TV to showcase its full potential.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

After calibration, it was possible to make subtle adjustments to the white balance and significantly improve the image characteristics. In SDR content, the quality has become practically reference-level – most colour errors have dropped below a ΔE value of 1, which is the level at which the human eye can no longer perceive differences. This is a result that places the S95F among the absolute top TV models available on the market.

In HDR material, calibration also brought a significant improvement. The tendency of the TV to blow out the image was managed, as confirmed by the analysis of the EOTF curve. There is still a slight tendency to brighten the entire scene or occasional loss of detail in the blacks, but this does not significantly affect the overall perception. After calibration, the S95F shows its full potential and can be regarded as one of the best TVs on the market!

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

Samsung S95F offers a noise reduction feature that smooths tonal transitions. It works very effectively, but in practice, it can be too aggressive. Materials of lower quality – e.g. older recordings or videos from YouTube – become soft and plastic when it is enabled, resembling an image digitally smoothed in graphic software. Unfortunately, the natural film grain, which often adds authenticity to the image, disappears in the process. Fortunately, the television does not lose too much fine detail, e.g. in skin textures or environmental elements. Therefore, this feature is best used judiciously – depending on preferences, one can achieve a smooth but less natural image or one that is truer to the original. In our opinion, the most universal choice is the “Standard” setting.

Image scaling performs significantly better. The television handles lower resolution materials well – even 576p content looks quite decent, though slight blockiness can be observed. Overall, the effect is very good, although it slightly trails behind what Sony Bravia 8 (II) or LG G5 can achieve. It’s also worth mentioning a small imperfection of the S95F – in older materials, overscan may occur, causing a slight trimming of the left edge of the image.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The Samsung S95F excels in motion fluidity, presenting phenomenal performance. The panel operates at a native resolution of 4K with a refresh rate of up to 165 Hz, and when combined with QD-OLED organic technology, it delivers incredible results. Sports and games look sensational – the picture is fast, dynamic, and very natural. Additionally, the built-in motion smoother and blur reduction system allow you to customise the character of the image to your own preferences. You can opt for a more 'framey' effect with visible film texture or a smooth, cinematic spectacle. Every viewer will find a setting that suits them.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

The same advantages of low motion blur and excellent motion fluidity characteristic of OLED panels are just the beginning, as the Samsung S95F has been designed with gamers in mind. The manufacturer has equipped it with four HDMI 2.1 ports – though limited to a bandwidth of 40 Gb/s, in practice, this has no impact on compatibility with consoles or PCs. We get a full package of gaming features: variable refresh rate (VRR), automatic game mode (ALLM), as well as a very well-implemented HGiG standard, ensuring that HDR titles look as the creators intended. This is complemented by Game Bar – a clear settings hub, where with one motion, we can preview and change all key image parameters. The proprietary motion smoother Game Motion Plus also deserves praise, as it can smooth out animation, which is especially useful in productions running at 60 frames, where stability is not always exemplary. While there is no support for Dolby Vision in games, it’s hard to consider this a serious drawback – Samsung compensates with other solutions. This is one of the best, if not the best, gaming TVs available on the market today.

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.