Samsung DU7192 (VA) vs Sony Bravia 3 50' (VA)

On the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, such a value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this quality level might be acceptable but it is definitely not enough when it comes to HDR. Additionally, a DCI-P3 colour gamut coverage of 82% does not favour presenting HDR content in its full glory. The limited colour range makes it difficult for the television to reproduce vibrant and diverse hues, which is crucial for achieving a cinematic experience.

Interestingly, in the 50-inch version, the Bravia 3 performs slightly better in terms of brightness than its larger variants. In measurements, it achieved around 370 nits, which still aren’t values that can compete with top-tier TVs, but are sufficient to speak of a semblance of HDR effect. For some users, this level will be acceptable; others will consider it typical for SDR content, where striking highlights or strong contrasts are not expected. So it must be clearly stated that the Bravia 3 is not a TV for those who want to squeeze maximum quality from the most challenging film materials.

However, this doesn’t mean that everything is average. Sony has equipped this model with an additional PFS filter, which works similarly to the solutions used in QLED TVs. As a result, the coverage of the DCI-P3 colour gamut has increased to over 91 percent. In everyday use, this means livelier, more saturated colours and a more pleasant image quality. Even if it lacks strong lighting effects, movies and series can look significantly more appealing than in its predecessor, the X75WL.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although it is the mode that most closely aligns with the creators' intent, it still has some imperfections. In the white balance graph for both SDR and HDR, there is a clear dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as large an impact on the perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious reservation. In the darkest parts of the image, it was too low, causing excessive brightening of those scenes, depriving the film of drama and contrast. In the case of HDR, the white balance remains at a similar level, but the EOTF curve graph draws attention. At the beginning, the curve noticeably bulges, leading to strong brightening of the darkest scenes. Then, the result sharply drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, needs refinement—especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

Sony Bravia 3 was primarily tested in movie mode, which immediately turned out to be the best choice among the factory settings. It's not a perfect picture, but compared to the eco mode that the TV suggests right out of the box, the difference is clear and positive. In movie mode, one can notice a certain issue: the image appears too warm, which stems from a lack of blue in the white balance. Nevertheless, in SDR content, the final effect can still be considered quite decent and satisfactory for everyday viewing. Much more serious errors emerge in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management combined with limited colour gamut coverage further exposes the shortcomings of the picture in this mode. All of this makes HDR on the Bravia 3 seem unconvincing and can spoil the impression left by the quite decent SDR content settings. Fortunately, this is not a hopeless situation. Various errors can be somewhat mitigated, and some can even be completely corrected through professional calibration. That's why we decided to check how the TV would perform after such adjustments.

Even with its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of factory settings. We took on this task, and the results turned out to be more than satisfactory. The white balance, which previously exhibited a strong yellow tint in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We were also able to properly model the gamma in SDR content, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR content, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR content still struggles with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a full representation of the dynamics of HDR content. Nonetheless, after calibration, the image is clearly better and much closer to the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

The calibration allowed us to extract significantly more from the ChooseTV 3 than we could have expected at the beginning. Firstly, we managed to correct the deficiency of blue, which previously caused a noticeable warming of the image. After a slight adjustment in the white balance, most of the errors in the Color Checker measurements for SDR content practically disappeared. The shades of white gained a natural quality, and brightness management in gamma stabilised to an almost ideal level, not exceeding the threshold of human eye perception. Therefore, it can be confidently said that in SDR content, after a few tweaks in the settings, ChooseTV 3 performs really remarkably. Much worse, although still decidedly better than before calibration, are HDR contents. The white balance was managed to be sorted out, however, the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which is immediately noticeable. Colour-wise, the effect has also improved, although it is far from perfect – many errors still exceed the threshold of four, and even five delta E units, which means they remain visible to the human eye. It was already clear earlier that ChooseTV 3 is not a television designed to impress with HDR quality. Nevertheless, it is pleasing that in SDR content, after calibration, the image can look really great, and in this category, the television has positively surprised us.

The tonal transition smoothing feature works in two modes – 'off' and 'auto'. Turning it off causes gradation issues, while the 'auto' mode provides smooth transitions, but at the cost of grain effect and details, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurry, and the edges of objects may contain artifacts. This limitation means the television performs better with higher resolution content.

Bravia 3 brings more to the Sony TV family than just a shared name. It stands out primarily with its ability to enhance the quality of weaker materials thanks to the processor used. Of course, we won't find the advanced XR chip known from more expensive models here, but even so, it's fair to say that the image in lower resolutions looked surprisingly good. Scaling worked effectively, and most parts of the screen were devoid of the typical excessive edge tearing found in budget constructions. The feature that improves the fluidity of tonal transitions is also noteworthy. At the high setting, it performs quite well, effectively masking gradient imperfections without a significant loss of detail. It does occasionally happen that the algorithm smoothingly blurs elements that should remain sharp – for example, faces – however, in the overall assessment, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to those watching lower quality content.

Even though Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence makes the TV stand out against the competition in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sport. In the motion smoothing menu, we find, among other things, a "Vibration Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image retains the characteristic stutter known from material recorded at 24 frames per second, which means that this feature practically fails to fulfil its purpose.

The fluidity of motion has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that might appeal to those who are more sensitive to the way images are displayed. This refers to the proprietary motion smoother, Motion Flow, which offers users a lot of adjustment options. With it, you can make the picture smoother, almost theatrical, or stick to a more cinematic style with the characteristic judder, which many people simply associate with a filmic vibe. These functions work for content with lower frame rates, such as movies and series recorded at 24 or 30 frames per second, which is the type of material we encounter on a daily basis. It is precisely in this area that the motion smoother proves to be one of the most important features for everyday use of the television, and here the Bravia 3 performs really well.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected at this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technology. The TV offers only basic features for gamers – automatic switching to low-latency mode (ALLM), and support for basic HDR for games in HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines, however, the limited brightness of the TV does not allow full enjoyment of the effects that this standard offers. Unfortunately, there are no conveniences such as GameBar, which is increasingly common even in cheaper models and significantly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance the user experience, especially for those who frequently switch display modes.

Bravia 3 isn't gear for eSports enthusiasts or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports closes the topic before it even has a chance to develop. This is a TV for the casual gamer who, after work, fires up FIFA or racing games, not for someone who measures every frame in a spreadsheet. Nonetheless, Sony has added a few nice extras to ensure it’s not too bare. ALLM works as it should, automatically switching the TV to game mode (low latency). We even find a simple Game Bar here, which is clear and straightforward. However, the biggest curiosity is the PlayStation Portal app. Thanks to it, you can launch games from your PS5 wirelessly and see them on the TV screen straight away. Sounds great, but it only takes a few minutes to feel significant delays. In our opinion, it’s more of a showcase of capabilities than something that can be used on a daily basis. If someone really wants to play, it’s better to plug the console in with an HDMI cable and forget about wireless issues.