Samsung DU7192 (VA) vs Hisense E7Q / E79Q

On the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, such a value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this quality level might be acceptable but it is definitely not enough when it comes to HDR. Additionally, a DCI-P3 colour gamut coverage of 82% does not favour presenting HDR content in its full glory. The limited colour range makes it difficult for the television to reproduce vibrant and diverse hues, which is crucial for achieving a cinematic experience.

Hisense E7Q / E79Q is a mid-brightness TV, with a peak luminance level of around 350-380 nits. This is the absolute minimum that allows viewing HDR content in a way that's close to the creators' intentions, though without a distinct "wow" effect. The results of synthetic tests on white test patterns were confirmed in practice – in movie scenes, the bright parts of the image are stable and fairly even, but it's hard to talk about a true "burst of light" here. In everyday use, such as when watching Netflix or YouTube, the HDR effect is acceptable and is more than sufficient for most users. However, it must be said clearly – this is not the level of top-end screens, and one shouldn't expect that at this price. Fortunately, the Hisense E7Q / E79Q has an advantage that allows it to score quite a few points: it's a QLED panel of the PFS LED type, using an additional phosphor layer that improves colour reproduction. The measured range of the DCI-P3 colour gamut is around 92%, which means that the colours in most scenes are vibrant, well-saturated, and pleasing to the eye, especially for this price bracket.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although it is the mode that most closely aligns with the creators' intent, it still has some imperfections. In the white balance graph for both SDR and HDR, there is a clear dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as large an impact on the perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious reservation. In the darkest parts of the image, it was too low, causing excessive brightening of those scenes, depriving the film of drama and contrast. In the case of HDR, the white balance remains at a similar level, but the EOTF curve graph draws attention. At the beginning, the curve noticeably bulges, leading to strong brightening of the darkest scenes. Then, the result sharply drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, needs refinement—especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

In Filmmaker mode, the Hisense E7Q / E79Q television really managed to impress. After the first measurements, it turned out that the white balance was quite well tuned, with the only minor deviation being a slight tendency towards a purple hue, which we mentioned earlier. However, this did not significantly impact the overall character of the image – it remained cohesive and pleasant to view. A much bigger issue was the brightness characteristics (gamma) in SDR content and the EOTF curve in HDR films. The television clearly brightened the image, flattening contrast and taking away depth. Gamma values could drop from the reference 2.4 down to around 1.9, making the image look as though it was covered with a thin, milky layer. Fortunately, this is a problem that can be relatively easily corrected through calibration.

Even with its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of factory settings. We took on this task, and the results turned out to be more than satisfactory. The white balance, which previously exhibited a strong yellow tint in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We were also able to properly model the gamma in SDR content, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR content, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR content still struggles with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a full representation of the dynamics of HDR content. Nonetheless, after calibration, the image is clearly better and much closer to the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

The biggest beneficiary of calibration in the case of the Hisense E7Q / E79Q was undoubtedly the SDR mode. It managed to achieve almost perfect image quality – most of the errors in the Color Checker test dropped below a value of 3, and often even 2, which is a remarkable result for this class of equipment. The biggest improvement came from aligning the brightness characteristic (gamma), which made the image no longer look blown out and regained natural depth. In HDR content, it was also possible to improve the colours and eliminate the purple tint that we mentioned earlier, but errors in the Color Checker measurements were still noticeable. This is due to the fact that – as is often the case with Hisense televisions – the screen manipulates brightness quite strongly, overexposing some colours. This was also indicated by the EOTF curve, which was slightly above the reference values, suggesting these minor issues with excessive brightening. Despite this flaw and the construction limitations that arise with HDR content, the Hisense E7Q / E79Q gained quite a bit after calibration. In everyday use, the television presents a coherent, natural, and pleasant-to-the-eye image, and the difference compared to the factory settings is indeed huge.

The tonal transition smoothing feature works in two modes – 'off' and 'auto'. Turning it off causes gradation issues, while the 'auto' mode provides smooth transitions, but at the cost of grain effect and details, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurry, and the edges of objects may contain artifacts. This limitation means the television performs better with higher resolution content.

In the case of Hisense E7Q / E79Q, upscaling and digital image processing are not the strongest points of this television. It is evident that the manufacturer has opted for simplicity rather than advanced image processing algorithms. The television does not offer any features that smooth tonal transitions or systems that enhance image clarity, which makes lower resolution materials look quite raw. Subtle compression edges can be seen on the screen, which better processors in other models can effectively hide.

During the testing of HD materials, we noticed that the E7Q tries to artificially boost detail, which sometimes works and other times has the opposite effect – the image becomes soft, slightly blurred, and at times even "watery." There is no aggressive sharpening that ruins naturalness, but there is also a lack of finesse in detail integration that better image processors provide.

Even though Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence makes the TV stand out against the competition in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sport. In the motion smoothing menu, we find, among other things, a "Vibration Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image retains the characteristic stutter known from material recorded at 24 frames per second, which means that this feature practically fails to fulfil its purpose.

Hisense E7Q / E79Q is a television with a 60 Hz screen, so sports fans in 4K may feel a slight disappointment – you simply won’t see such smooth images here as in more expensive models with higher refresh rates. Fortunately, when it comes to movies, the situation is much better. Cinematic materials recorded at 24 frames per second can be displayed here using a motion smoothing feature, allowing the user to adjust the picture to their own preferences – more cinematic with visible frames or smoother, in a theatrical style.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected at this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technology. The TV offers only basic features for gamers – automatic switching to low-latency mode (ALLM), and support for basic HDR for games in HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines, however, the limited brightness of the TV does not allow full enjoyment of the effects that this standard offers. Unfortunately, there are no conveniences such as GameBar, which is increasingly common even in cheaper models and significantly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance the user experience, especially for those who frequently switch display modes.

Hisense E7Q / E79Q is a really good TV for gamers, even though it doesn’t support 4K signal at 120 Hz. However, the manufacturer has included a set of features that until recently could only be found in more expensive models. There's ALLM, which is auto-switching to low latency mode, allowing the TV to activate game mode with very low input lag automatically. We also have VRR, working up to 60 Hz – while this may not look impressive on paper, in practice it is fully sufficient, as most console games don’t exceed this limit anyway. All these settings can be quickly found in the Game Bar panel, a convenient menu created specifically for gamers. From this level, you can change picture modes, turn on a frame counter, or even… an on-screen crosshair – in the Vidaa system amusingly called a “target point,” which is the result of a clumsy translation from the Chinese manufacturer.

Special praise should go to the ability to play in 1080p at 120 Hz, which significantly improves the fluidity and responsiveness of the image. This means that if someone wants to play a few titles at a higher refresh rate, they can simply lower the resolution and enjoy much smoother motion. Despite the lack of 4K@120Hz, the Hisense E7Q / E79Q really performs well as a gaming TV – especially for those who aren’t looking for perfection but a solid and fast screen for everyday gaming.