Samsung DU7192 (IPS) vs TCL C655 Pro

The maximum luminance in HDR materials is 245 nits, which is often surpassed by even lower results. Such values will definitely not be sufficient for comfortable viewing of HDR materials, due to the lack of appropriate image dynamics and colour distortions caused by the low brightness of the unit. Although the manufacturer has equipped its device with an HDR format offering dynamic metadata, HDR10+, which is what we're talking about, is very rarely used compared to Dolby Vision, which Samsung has not yet introduced in its televisions. It’s also worth mentioning that Samsung DU7192 offers only 82% coverage of the wide DCI-P3 colour gamut, which is another reason we shouldn't provide a signal in a wide dynamic range, as colour losses will be very noticeable. Samsung DU7192 delivers high-quality image that will satisfy most users.

In the HDR effect quality category, the television TCL 655 PRO shows decent capabilities, achieving 550 nits of peak brightness. This allows for enjoying HDR effects, which can be clearly seen in scenes such as the first one from the movie Life of Pi or the final shot from The Meg. However, the limited number of dimming zones causes some issues. While in bright scenes the television performs better than its lower model, in more demanding scenes, such as the second and fourth scenes from Sicario 2, it struggles more. The dimming algorithm aims for deep blacks, but at the cost of brightness – which at those moments can cause a drop in brightness of even half. In these more challenging scenes with small elements, it's hard to find any praise, and the HDR effect resembles SDR. Nevertheless, the coverage of the colour palette deserves recognition, which, like in the version without the PRO suffix, is at a very good level.

The best factory mode we used throughout the testing process was "Filmmaker". This, like the vast majority of modes, had its flaws. Starting with the most basic graph, which is white balance, we can notice a significant dominance of red colour, both in SDR mode and HDR. Although in the latter there was also some green, which didn’t have a major impact on the overall perception. A graph with such results, in both cases, gives us an image characterised by strong yellowing, clearly visible on whites and on the faces of the actors. Another important graph, if not more important, is gamma. This, which is supposed to control contrast in materials with a standard colour palette, was quite good in factory mode with one "but" regarding the beginning. In the darkest scenes, it was significantly lowered, resulting in strong brightening, which left the film lacking contrast and suspense overall. As we mentioned, HDR materials regarding white balance remained at a similar level. The main change is the EOTF curve graph. At the very beginning, we can observe a bulge, which, just like in the case of gamma, strongly brightened the darkest scenes. However, after that, the graph significantly changed its characteristics and the measured result dived below the reference line, causing the film to lose even more dynamism.

Each of our TV tests is conducted in movie mode, which usually offers the best colour reproduction. However, even this mode is not free from issues, as we noted in the TCL 655 PRO model.

In the case of HD content, the white balance clearly shifts towards red, and this effect becomes particularly noticeable in a scene from Star Wars, where the white elements of the scenery take on a pink hue. For 4K HDR material, the situation looks better, but there is a tendency to overly emphasise the colour blue. As a result, the image can give a sense of artificial sharpness, which proves to be uncomfortable for the eyes over a longer period. The brightness characteristics also leave much to be desired. The Gamma chart indicates serious difficulties with excessive brightening, making the overall presentation appear washed out. Additionally, the EOTF curve reveals significant problems with reproducing very small elements – they are overly dimmed, as we have detailed in the paragraph regarding HDR effects.

Samsung has equipped even its lowest-end TVs with advanced tools for carrying out the calibration process. So we got to work, and the results of our efforts are more than satisfactory. The white balance, which previously had a strong yellow tint in both scenarios, now looks much, much better, even if there are slight deviations from the norm. The picture will still look significantly cleaner than it did before the calibration process. We managed to model the gamma in SDR materials very well, allowing the image to be as contrasty as the TV permits. The EOTF curve has also changed its face and doesn’t brighten or darken the image in such a drastic manner. However, it is worth mentioning that in the case of HDR materials, the deltaE errors are still very high, but this is due to the unit's insufficient brightness.

After calibrating the TCL 655 PRO television, there is a noticeable improvement in white balance, where the tendency for the screen to be overly pink has been completely eliminated, which was previously noticeable in factory mode. The picture has taken on more natural tones, especially in white and bright elements, which positively affects the overall image perception. Regarding brightness characteristics, the Gamma chart has also improved – the screen is no longer excessively bright, which previously made the image appear washed out. Nevertheless, there are still some issues with the EOTF curve, which are difficult to eliminate due to the television's construction and its limited number of backlight zones. These limitations prevent achieving perfect results in this regard. However, despite this minor fault, the overall effect after calibration is truly outstanding, providing high picture quality and very good colour reproduction.

Let's return for a moment to the tonal transition smoothing function. We can set it in only two ways - off and auto. As you can easily guess, the first of these causes significant issues with gradation. However, if we set the second option, both movies and series will offer us smooth colour transitions. It is worth mentioning, though, that this function has its drawbacks. It heavily interferes with the director's intent, softens the film grain effect, and worse, often misinterprets small details, blurring them as well. Consequently, we consider that this function does not exist and do not recommend using it, as this is how the smoothness of tonal transitions was tested on the tested display.

The next thing we will check in this paragraph is the image scaling process, which is extremely important when watching material in lower resolution. Unfortunately, as this is the manufacturer's lowest model, this function doesn't work very well. All details are heavily blurred, and a characteristic white halo forms around the characters.

The TCL 655 PRO television handles tonal transitions quite well in lower-quality material. The "Gradual Smoothing" feature at low settings effectively smooths tonal transitions, but this comes at the cost of losing some essential details, such as the texture of objects. On the plus side, it doesn't negatively affect film grain, which helps maintain a natural look to the image.

In the context of digital processing, the television adds artificial sharpness. This may appeal to users who prefer a bolder image. However, individuals who favour a softer, more subtle look may find this a drawback. Additionally, a downside is the image cropping due to overscan, which limits the field of view and cuts off the edges of the frame. This can be problematic in certain scenes - for example, news tickers.

Despite the fact that Samsung DU7192 is the lowest model in the manufacturer's portfolio, it has implemented a motion smoothing system. Although it is quite limited in features compared to higher models, its very existence is a significant plus in the context of competition in a similar price range. The maximum refresh rate that we will give to the tested television is 60 Hz, which is entirely sufficient for films and series, although not when it comes to sports. In the motion smoothing menu, we find two functions responsible for improving smoothness. These are "Motion Blur Reduction" and "Clear Motion (LED)". We'll discuss the latter a bit later. Let's focus on the former, as it is quite mysterious. Unfortunately, despite its presence, we did not find any usefulness. At each of the settings, the picture looked the same, characterised by the typical judder known from materials recorded at 24 fps.

The panel Samsung DU7192 features an average response time. It's worth mentioning that due to this specific type of panel, it is better than VA panels in a similar price range. Therefore, it can be said that it won't be the worst in terms of watching sports.

The TCL C655 PRO television is equipped with a 4K display with a refresh rate of 60 Hz, making it ideal for watching movies. Additionally, the "Flicker Reduction" feature allows for adjusting the smoothness of the picture, giving the user the choice between smoother motion and a cinematic, frame-by-frame effect. Furthermore, the television performs well with lower resolution content, such as Full HD and 2K, offering a refresh rate of 120 Hz, which will surely appeal to gamers who can enjoy a smoother image, albeit at the cost of lower resolution.

The Samsung DU7192 television is equipped only with HDMI 2.0 ports, which isn’t surprising considering the device’s price and its consumer profile. Therefore, it’s also logical that we won’t achieve maximum quality on the latest generation consoles. That’s why it only features the most basic options for gamers, namely ALLM. It’s a pity the manufacturer didn’t implement at least a GameBar, as this is now standard, even in lower-end TVs, and could offer significant conveniences in terms of quickly changing settings.

The TCL C655 PRO TV offers an almost perfect set of features for gamers, supporting all key technologies that significantly enhance gameplay comfort. The ALLM feature automatically switches the TV to low-latency mode, improving responsiveness and minimising signal delay – particularly important in fast-paced titles. VRR synchronises the screen refresh rate with the frame rate generated by the console, eliminating screen tearing and ensuring smoother gameplay.

Support for Dolby Vision in game mode enables more detailed colour and contrast representation in games that support this format, while the Game Bar provides quick access to essential settings, such as response time and latency level. Unfortunately, the model does not support 4K resolution at 120 Hz, which may disappoint the most demanding gamers. However, for those willing to forgo 4K, support for Full HD and 2K at 120 Hz offers exceptionally smooth visuals, making it an attractive alternative for high refresh rate enthusiasts.