Samsung DU7192 (IPS) vs TCL C655 / C69B (43" - 50")

The maximum luminance in HDR materials is 245 nits, which is often surpassed by even lower results. Such values will definitely not be sufficient for comfortable viewing of HDR materials, due to the lack of appropriate image dynamics and colour distortions caused by the low brightness of the unit. Although the manufacturer has equipped its device with an HDR format offering dynamic metadata, HDR10+, which is what we're talking about, is very rarely used compared to Dolby Vision, which Samsung has not yet introduced in its televisions. It’s also worth mentioning that Samsung DU7192 offers only 82% coverage of the wide DCI-P3 colour gamut, which is another reason we shouldn't provide a signal in a wide dynamic range, as colour losses will be very noticeable. Samsung DU7192 delivers high-quality image that will satisfy most users.

The quality of the HDR effect on the TCL C69B / C655 television is quite average. A brightness level of 350 nits, while not the worst, still does not allow for a full enjoyment of the HDR effects that require higher luminance to showcase their power. Additionally, the television, despite using a quantum dot coating (QLED), offers average coverage of the wide DCI-P3 colour gamut at 91%, which may limit its colour richness in HDR content.

The best factory mode we used throughout the testing process was "Filmmaker". This, like the vast majority of modes, had its flaws. Starting with the most basic graph, which is white balance, we can notice a significant dominance of red colour, both in SDR mode and HDR. Although in the latter there was also some green, which didn’t have a major impact on the overall perception. A graph with such results, in both cases, gives us an image characterised by strong yellowing, clearly visible on whites and on the faces of the actors. Another important graph, if not more important, is gamma. This, which is supposed to control contrast in materials with a standard colour palette, was quite good in factory mode with one "but" regarding the beginning. In the darkest scenes, it was significantly lowered, resulting in strong brightening, which left the film lacking contrast and suspense overall. As we mentioned, HDR materials regarding white balance remained at a similar level. The main change is the EOTF curve graph. At the very beginning, we can observe a bulge, which, just like in the case of gamma, strongly brightened the darkest scenes. However, after that, the graph significantly changed its characteristics and the measured result dived below the reference line, causing the film to lose even more dynamism.

Tested in film mode, the television TCL C69B / C655 unfortunately does not meet expectations regarding colour accuracy. Although the film mode suggests better representation, it has as much in common with film as nothing at all. There are numerous errors, particularly in the white balance – for both HD and 4K HDR content – where the dominance of blue is very apparent. For the viewer, this means that the image becomes unnaturally cool, affecting the overall perception of colours and the visual impression. The colour checker confirms these errors, showing that colours shift towards cooler shades.

When it comes to brightness characteristics and related contrast, gamma is very unstable for the material, making the image potentially slightly darker. The EOTF curve for the 4K material shows some errors, with significant deviations towards the end of the graph, which negatively affects the perception of darker parts of the image.

Samsung has equipped even its lowest-end TVs with advanced tools for carrying out the calibration process. So we got to work, and the results of our efforts are more than satisfactory. The white balance, which previously had a strong yellow tint in both scenarios, now looks much, much better, even if there are slight deviations from the norm. The picture will still look significantly cleaner than it did before the calibration process. We managed to model the gamma in SDR materials very well, allowing the image to be as contrasty as the TV permits. The EOTF curve has also changed its face and doesn’t brighten or darken the image in such a drastic manner. However, it is worth mentioning that in the case of HDR materials, the deltaE errors are still very high, but this is due to the unit's insufficient brightness.

After calibration, the movie mode on the TCL C69B / C655 television improves in quality. The most significant enhancement can be seen in tonal reproduction, and the white balance presents itself much better – without major errors. We will no longer see the excessive dominance of cool shades. The gamma has also been improved, resulting in a more stable representation of brightness and contrast. However, due to limitations in the average colour palette of the television, Colour Checker tests for 4K materials did not achieve outstanding results. Despite these technological limitations, the image became more authentic, positively impacting the reception of film content.

Let's return for a moment to the tonal transition smoothing function. We can set it in only two ways - off and auto. As you can easily guess, the first of these causes significant issues with gradation. However, if we set the second option, both movies and series will offer us smooth colour transitions. It is worth mentioning, though, that this function has its drawbacks. It heavily interferes with the director's intent, softens the film grain effect, and worse, often misinterprets small details, blurring them as well. Consequently, we consider that this function does not exist and do not recommend using it, as this is how the smoothness of tonal transitions was tested on the tested display.

The next thing we will check in this paragraph is the image scaling process, which is extremely important when watching material in lower resolution. Unfortunately, as this is the manufacturer's lowest model, this function doesn't work very well. All details are heavily blurred, and a characteristic white halo forms around the characters.

The "Gradual Smoothing" feature works very well on the TCL C69B TV and, surprisingly, does not remove desirable effects like film grain – unlike some solutions from other manufacturers. Unfortunately, when it comes to image scaling, it looks poor. The TV artificially sharpens the image, causing the edges of objects to appear quite jagged. This situation may appeal to some users who prefer a more "hard" look to the image, but it is not an ideal solution for those who value naturalness and fluidity of details.

Despite the fact that Samsung DU7192 is the lowest model in the manufacturer's portfolio, it has implemented a motion smoothing system. Although it is quite limited in features compared to higher models, its very existence is a significant plus in the context of competition in a similar price range. The maximum refresh rate that we will give to the tested television is 60 Hz, which is entirely sufficient for films and series, although not when it comes to sports. In the motion smoothing menu, we find two functions responsible for improving smoothness. These are "Motion Blur Reduction" and "Clear Motion (LED)". We'll discuss the latter a bit later. Let's focus on the former, as it is quite mysterious. Unfortunately, despite its presence, we did not find any usefulness. At each of the settings, the picture looked the same, characterised by the typical judder known from materials recorded at 24 fps.

The panel Samsung DU7192 features an average response time. It's worth mentioning that due to this specific type of panel, it is better than VA panels in a similar price range. Therefore, it can be said that it won't be the worst in terms of watching sports.

Television TCL C69B / C655 in its smallest variants offers decent, though not perfect, results in terms of motion smoothness. For movies, the television features a "Flicker Reduction" function, which allows for adjustment of motion smoothness on a scale from 1 to 10. Thanks to this option, we can tailor the image appearance to either a cinematic or more theatrical preference (with less or greater speed).

The Samsung DU7192 television is equipped only with HDMI 2.0 ports, which isn’t surprising considering the device’s price and its consumer profile. Therefore, it’s also logical that we won’t achieve maximum quality on the latest generation consoles. That’s why it only features the most basic options for gamers, namely ALLM. It’s a pity the manufacturer didn’t implement at least a GameBar, as this is now standard, even in lower-end TVs, and could offer significant conveniences in terms of quickly changing settings.

The TCL C69B / C655 TV in its smallest variants offers a range of features dedicated to gamers, such as ALLM (Automatic Low Latency Mode), VRR (Variable Refresh Rate), Dolby Vision for gamers, and Game Bar. ALLM automatically switches the TV to low latency mode, improving responsiveness and minimising delays in control. VRR allows for synchronising the screen refresh rate with the frame rate generated by the console, eliminating screen tearing and providing smoother gameplay. Dolby Vision for gamers ensures better colour and contrast representation in games that support this format, resulting in better image quality. Meanwhile, the Game Bar provides quick access to game settings and monitors key parameters such as input lag.

However, the TV has certain limitations that may affect gaming comfort. The 60 Hz panel does not allow for displaying signals with a higher refresh rate, which can impact image smoothness in dynamic games. The lack of support for G-Sync technology for PCs can also be noticeable when gaming on a computer, especially in demanding, fast-paced titles.