Samsung DU7192 (IPS) vs PHILPS PUS9060

The maximum luminance in HDR materials is 245 nits, which is often surpassed by even lower results. Such values will definitely not be sufficient for comfortable viewing of HDR materials, due to the lack of appropriate image dynamics and colour distortions caused by the low brightness of the unit. Although the manufacturer has equipped its device with an HDR format offering dynamic metadata, HDR10+, which is what we're talking about, is very rarely used compared to Dolby Vision, which Samsung has not yet introduced in its televisions. It’s also worth mentioning that Samsung DU7192 offers only 82% coverage of the wide DCI-P3 colour gamut, which is another reason we shouldn't provide a signal in a wide dynamic range, as colour losses will be very noticeable. Samsung DU7192 delivers high-quality image that will satisfy most users.

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

The best factory mode we used throughout the testing process was "Filmmaker". This, like the vast majority of modes, had its flaws. Starting with the most basic graph, which is white balance, we can notice a significant dominance of red colour, both in SDR mode and HDR. Although in the latter there was also some green, which didn’t have a major impact on the overall perception. A graph with such results, in both cases, gives us an image characterised by strong yellowing, clearly visible on whites and on the faces of the actors. Another important graph, if not more important, is gamma. This, which is supposed to control contrast in materials with a standard colour palette, was quite good in factory mode with one "but" regarding the beginning. In the darkest scenes, it was significantly lowered, resulting in strong brightening, which left the film lacking contrast and suspense overall. As we mentioned, HDR materials regarding white balance remained at a similar level. The main change is the EOTF curve graph. At the very beginning, we can observe a bulge, which, just like in the case of gamma, strongly brightened the darkest scenes. However, after that, the graph significantly changed its characteristics and the measured result dived below the reference line, causing the film to lose even more dynamism.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

Samsung has equipped even its lowest-end TVs with advanced tools for carrying out the calibration process. So we got to work, and the results of our efforts are more than satisfactory. The white balance, which previously had a strong yellow tint in both scenarios, now looks much, much better, even if there are slight deviations from the norm. The picture will still look significantly cleaner than it did before the calibration process. We managed to model the gamma in SDR materials very well, allowing the image to be as contrasty as the TV permits. The EOTF curve has also changed its face and doesn’t brighten or darken the image in such a drastic manner. However, it is worth mentioning that in the case of HDR materials, the deltaE errors are still very high, but this is due to the unit's insufficient brightness.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

Let's return for a moment to the tonal transition smoothing function. We can set it in only two ways - off and auto. As you can easily guess, the first of these causes significant issues with gradation. However, if we set the second option, both movies and series will offer us smooth colour transitions. It is worth mentioning, though, that this function has its drawbacks. It heavily interferes with the director's intent, softens the film grain effect, and worse, often misinterprets small details, blurring them as well. Consequently, we consider that this function does not exist and do not recommend using it, as this is how the smoothness of tonal transitions was tested on the tested display.

The next thing we will check in this paragraph is the image scaling process, which is extremely important when watching material in lower resolution. Unfortunately, as this is the manufacturer's lowest model, this function doesn't work very well. All details are heavily blurred, and a characteristic white halo forms around the characters.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

Despite the fact that Samsung DU7192 is the lowest model in the manufacturer's portfolio, it has implemented a motion smoothing system. Although it is quite limited in features compared to higher models, its very existence is a significant plus in the context of competition in a similar price range. The maximum refresh rate that we will give to the tested television is 60 Hz, which is entirely sufficient for films and series, although not when it comes to sports. In the motion smoothing menu, we find two functions responsible for improving smoothness. These are "Motion Blur Reduction" and "Clear Motion (LED)". We'll discuss the latter a bit later. Let's focus on the former, as it is quite mysterious. Unfortunately, despite its presence, we did not find any usefulness. At each of the settings, the picture looked the same, characterised by the typical judder known from materials recorded at 24 fps.

The panel Samsung DU7192 features an average response time. It's worth mentioning that due to this specific type of panel, it is better than VA panels in a similar price range. Therefore, it can be said that it won't be the worst in terms of watching sports.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The Samsung DU7192 television is equipped only with HDMI 2.0 ports, which isn’t surprising considering the device’s price and its consumer profile. Therefore, it’s also logical that we won’t achieve maximum quality on the latest generation consoles. That’s why it only features the most basic options for gamers, namely ALLM. It’s a pity the manufacturer didn’t implement at least a GameBar, as this is now standard, even in lower-end TVs, and could offer significant conveniences in terms of quickly changing settings.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.