PHILPS PUS9060 vs XIAOMI S Mini 2026 (85"-98") 144Hz

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

The larger versions of the Xiaomi S Mini 2026 offer very similar HDR performance. Peak brightness reaches around 1,000 nits, which is a very solid result for a TV in this price bracket. It's most noticeable in bright scenes, where large, heavily lit areas of the picture can look really impressive. The TV has enough brightness headroom that HDR isn't limited to just a slightly brighter image. However, very small pinpoint highlights on an almost completely black background fare worse. In such cases the local dimming system significantly reduces their brightness to avoid lighting adjacent parts of the image and to preserve good blacks. As a result, small reflections or single lamps don't have the same intensity as in much more expensive models. This is typical behaviour for Mini LED TVs and it's hard to treat it as something unique to Xiaomi.

HDR colours

The colour performance is similarly comparable. Although the manufacturer uses the term QLED, the expanded colour gamut here comes from the PFS phosphor. In our measurements the TV covered about 94% of the DCI-P3 space and about 74% of the much more demanding BT.2020. In practice this yields well-saturated colours in most HDR material and it's hard to point to obvious gaps. Limitations appear mainly with the most saturated shades of green, which the TV can no longer reproduce fully.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

On the larger versions of the Xiaomi S Mini 2026, Film mode performs best, although even here the out-of-the-box settings are not without flaws. In SDR the white balance was noticeably warm due to an excess of red. In HDR the opposite was true, with too much blue and too little red, which made the image cooler. Additionally, both the gamma response in SDR and the EOTF curve in HDR sat slightly above the reference values. In practice this resulted in a slightly brightened image, particularly in the midtones. It wasn't a major fault, but with more demanding material you could see that the image wasn't reproduced entirely in line with the filmmakers' intent.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

After calibration we mainly managed to even out the white balance, so colours look much more natural in both SDR and HDR. We also improved the gamma response, so SDR content is no longer unnecessarily brightened and stays closer to reference values. The only larger issue remaining is in HDR. Xiaomi still controls brightness a little too aggressively and renders some scenes brighter than it should. This is less noticeable on the larger models than on the 55–75-inch versions, but the EOTF curve still runs slightly above the reference. In practice HDR is therefore slightly brightened, even though colour reproduction after calibration is already very good.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

The larger variants of the Xiaomi S Mini 2026 also use the MT5896 processor and perform similarly in terms of digital image processing. Upscaling isn't a strong suit of this model. Low-resolution material is upscaled to 4K in a fairly basic way and it doesn't recover fine detail as well as more refined TVs. The 85- and 98-inch versions do include a feature intended to reduce posterisation, but it's barely effective. When it's switched on it's hard to notice any real improvement, so in scenes with visible colour banding the TV still does little to address it.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The biggest difference between the various sizes of the Xiaomi S Mini 2026 is the panel's refresh rate. The 55–75-inch variants use a 60 Hz panel, which in practice means noticeably less smooth motion than the larger versions. This is easiest to spot when watching sport, fast-moving scenes or gaming, where the picture isn't as smooth and clear in motion.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

The smaller versions of the Xiaomi S Mini 2026 unfortunately have a big limitation for gamers — a 60 Hz panel. In 4K we’re therefore limited to 60 fps and can’t fully take advantage of the PS5 or Xbox Series X. You can run 120 Hz, but only after dropping the resolution to 1080p or 1440p. Other than that, it’s pretty reasonable. The TV supports ALLM and automatically switches to game mode when it detects a console. There’s also a Game Bar where you can quickly check the main gaming settings. Our biggest reservation is HGiG. The HDR calibration screens on the PS5 and Xbox don’t match the TV’s actual capabilities. If you set HDR exactly according to them, some of the brightest elements can simply be blown out.