PHILPS PUS9060 vs TCL C69K / Q6C

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

In terms of brightness, TCL C69K / Q6C is a moderate model. In optimal movie conditions, it shows its full potential, reaching a maximum of around 600 nits. In scenes with large, intense light sources, the HDR effect can be truly satisfying, giving a cinematic glow. However, it's important to keep in mind that when managing the backlight zones, there are situations where parts of the image are dimmed, and at times become barely visible. This suggests that there is still a lack of proper optimization of the algorithms, although considering the technical parameters in this price range, the overall construction still looks very good.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

The Filmmaker Mode, which has been introduced in this year's TCL TVs (including the C69K / Q6C), is definitely the best choice "to start with". This is the mode we recommend for everyday movie and series viewing. Unfortunately, as is often the case, best does not mean perfect. In SDR materials, the image turned out to be too warm, with a strong red tint in the white balance. The opposite impression was had with HDR content – here the image became cooler than it should have been, due to an excess of blue. Additionally, there is the brightness characteristic, which at times resulted in overexposures. In practice, this translated to fairly noticeable errors in color tests, which is difficult to accept in a mode branded as "by the creators".

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

Through white balance adjustment, we were able to significantly reduce the tendency of ChooseTV C69K / Q6C to distort colours, which resulted in a very good final outcome. After calibration, the problem of excessive warming of scenes in SDR and over-cooling of the image in HDR disappeared. However, it's worth analysing the brightness characteristics more closely. While in SDR content there are few complaints – the picture looks really good, especially in older films, TV programmes, or on YouTube – it performs much worse with HDR content. Analysis of the EOTF curve suggests that everything is fine, but in practice (EOTF in films), the limitations of the actual construction become evident. This model tends to excessively brighten small parts of the frame, while in other situations, it darkens the entire scene too much. The effect of calibration is therefore undeniable, and in terms of colourimetry, ChooseTV C69K / Q6C gains a lot. Unfortunately, certain limitations arising from local dimming management simply cannot be bypassed.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

In terms of image scaling, TCL C69K / Q6C performs quite well. Lower quality content is presented acceptably, and due to the lack of overscan issues, the image is displayed in full without any cropping. However, don’t expect miracles – materials of very low quality won’t gain a second life here, as the image processor has its limitations.

On thin lines and details, there is noticeable jaggedness, which reveals the lack of more advanced image enhancement algorithms. It's also a shame that the C69K / Q6C lacks a feature for smoothing tonal transitions. As a result, in older films or video materials, color banding can be visible and may become distracting during extended viewing.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The use of a 144 Hz panel in TCL C69K / Q6C is a significant advantage in this price range. This represents an important step forward compared to its predecessor (C655 PRO), which only offered 60 Hz at 4K. The difference is particularly noticeable when watching sports or gaming – the ball, players, and dynamic action in games are displayed more clearly and without losing detail. An interesting feature is also the panel's ability to operate at 240 Hz (which the manufacturer does not officially mention) – we will revisit this topic in relation to the PC gaming mode. TCL has also added a feature for movie fans: “Motion Clarity.” This allows users to adjust the picture to their own preferences using two simple sliders. We can either leave the visible film frame or opt for a very smooth one, "

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

TCL C69K / Q6C is a television that can confidently be called equipment designed for gamers. Here we have 4K at 144 Hz, VRR support, automatic game mode (ALLM), and Dolby Vision Gaming. Additionally, there's a practical Game Bar, which is a panel with the most important settings within easy reach – handy when we want to change something quickly during gameplay (e.g., aspect ratio: Yes, it can be done!). The wide range of VRR, reaching up to 240 Hz, is noteworthy. However, this option is mainly for PC gamers looking to go below native 4K resolution. In this case, the television can spread its wings and show additional smoothness, particularly in fast e-sport titles. For consoles, we stick to the standard limit of 120 Hz, but even so, the possibilities are truly extensive. The only minor criticism is slight ghosting that can sometimes be seen in dynamic scenes. Other than that, C69K / Q6C offers everything gamers expect from a television.