PHILPS PUS9060 vs Samsung S85H

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 lineup. In the same film scenes last year’s model sat closer to about 700 nits, while the S85H can reach roughly 800 nits. That’s not a change that completely transforms the HDR experience, but the extra headroom is noticeable, especially with point highlights, reflections or stronger special effects. Around 800 nits is a very good result for an entry-level OLED and in most films it’s enough for HDR to have the necessary punch. Bright elements can clearly stand out against perfect blacks, and that contrast is still doing most of the work here. However, you need to remember the typical limitation of OLED technology. When a very bright scene covers a large portion of the screen, brightness can drop to almost half. This is the result of panel protections that limit its output with large bright areas.

Colours

The S85H can deliver very pleasant, saturated colours and in most HDR films it looks really good in that regard. We measured around 95% coverage of DCI-P3, so the palette most commonly used in films is reproduced to a very high degree. Skin tones, greens and stronger reds still have appropriate intensity and under normal viewing it’s hard to have major complaints. Only when you look more broadly at BT.2020 do the limitations of the new WOLED SE panel become apparent. Coverage was about 70%, a bit less than WOLEDs of the previous generation and noticeably less than QD-OLED panels. In films this isn’t a big loss, since most productions rarely use such heavily saturated colours. You’re more likely to notice it in games, where developers more often opt for more intense colours.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

To evaluate colours we of course used Filmmaker mode, and in SDR our S85H unit was set very well from the factory. The largest deviation appears in the white balance, where as brightness increases it starts to lose a bit of blue. In practice this means whites and greys have a slightly warmer tint than they should. However, it's not a big fault and during normal viewing it generally isn't very noticeable. Gamma also stays close to the reference value, so the picture is neither overly bright nor unnecessarily dim. The S85H's SDR picture therefore looks really good straight out of the box. A few more imperfections appear in HDR. Here the white balance shifts more with rising brightness, with blue starting to dominate and the red component clearly lacking. This also results in larger errors in some colours. These aren't yet colour errors that completely change the character of the picture, but in direct comparison with the reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

Calibration delivers really good results on the S85H. First and foremost, we were able to set the white balance almost perfectly, which removes the slightly too-warm picture tone previously seen in SDR. Colour reproduction also improves significantly, with most errors falling to very low levels, and in everyday viewing it's hard to find any visible inaccuracies. You can also improve HDR quite a bit, although some issues remain that stem from the TV's inherent characteristics. The S85H doesn't always hold the luminance curve perfectly. The darkest parts are slightly boosted, while, as you approach the panel's limits, you can see small deviations in the brightest highlights. Add to that the limited coverage of the wider BT.2020 colour gamut, which of course cannot be overcome by any calibration. Despite that, the end result is very good, and after calibration the S85H can deliver a really well-tuned, natural image.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

Samsung's S85H uses the same proprietary AI processor, AI NQ4 Gen2, as last year’s S85F, and in terms of digital image processing it performs quite well. Upscaling is one of the model's stronger points. Lower-resolution material is well sharpened, edges look natural and the picture doesn't come across as overly artificial. Just remember a common quirk of Samsung TVs: at very low resolutions you can't completely turn off overscan, so the TV may slightly crop the left edge of the picture. The "noise reduction" function, that is smoothing weaker tonal transitions, also works very well. The processor can effectively remove posterisation and other artefacts visible in lower-quality material. However, be careful with the strength of this function, because Samsung can be fairly aggressive here. When it's activated, along with unwanted artefacts, fine details such as skin or clothing texture also start to disappear.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The S85H uses an OLED panel, so it performs brilliantly when it comes to motion blur. Pixels respond almost instantly, so moving objects don't produce the characteristic ghosting seen on some LCD TVs. This is especially noticeable with sport or fast-paced games, where the picture stays very clean even during rapid motion. The panel itself runs at 120 Hz. That's more than enough for movies, TV shows, sport or console gaming. It's a shame Samsung didn't include a higher refresh rate aimed at PC gamers, as more and more TVs now offer 144 or even 165 Hz at 4K. However, that doesn't affect motion handling in films or sport.

There's also the classic motion smoothing feature with two settings: blur reduction and judder reduction. So you can choose whether films should keep their cinematic 24 frames per second, or whether you'd prefer to smooth them a bit. The S85H gives plenty of freedom here, and the interpolation itself works well and, with sensible settings, doesn't generate too many artefacts.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

Samsung S85H is very well prepared for gaming, essentially regardless of whether you connect a console or a computer. The manufacturer didn’t skimp on connectors and all four HDMI ports support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR and ALLM without worrying which input to plug your console into. With multiple devices that matters a lot, since you don’t have to choose between a console, a PC or a soundbar connected via eARC. The feature set itself is very complete. The S85H supports VRR, FreeSync and automatic switching to Game Mode, and Samsung also offers its expanded Game Bar, which lets you quickly view the key signal parameters and change settings without leaving the game. The only real omission is Dolby Vision, which will matter mainly for Xbox owners. That’s a typical trait of Samsung TVs. Game Motion Plus performs very well and it’s one of the features that has set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as large an increase in input lag as a classic motion interpolator. In practice, for slower-paced games, racing or action titles it can genuinely improve motion perception, especially if you’re sensitive to low frame rates.