PHILPS PUS9060 vs Samsung Q8F

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

In terms of brightness, the Samsung Q8F performs surprisingly well for a TV without local dimming. It measures up to 500 nits, which in practice means that most movie and series scenes look pleasant, and it cannot be faulted for lacking the "HDR effect." In films like Life of Pi or The Meg, the screen can burst with bright light, delivering a level of lighting effect that is satisfying. It struggles more in challenging moments—such as dark scenes with single bright points. The global dimming used causes the TV to darken the image to maintain deep blacks, but at the expense of detail brightness. This is clearly visible in the scene from Sicario 2, where the brightness of the helicopter lights dropped to around 200 nits. This is a deliberate design choice that gives the impression of deeper blacks but takes some shine away from individual elements, and one should simply keep that in mind. Regarding colour reproduction, the Q8F uses quantum dot technology, which expands the colour gamut. A coverage of the DCI-P3 palette at 91% can be considered a decent result, although it is not a record-breaking figure compared to other QLEDs.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

We decided to check out the Filmmaker mode because right out of the box it gave us the best picture. However, that doesn't mean it was perfect. The white balance had too much of a blue and red tint, causing the whites to lean towards a slight purple-pink hue. Such imbalance affected the visibility of virtually all colours, which is clearly seen in the comparison photo below. The brightness characteristics in SDR content were quite well calibrated, although in HDR materials we noticed that the TV didn't always handle its global dimming well — at times the screen was too dim, while at other times it could suddenly brighten up. Fortunately, issues related to colours can be effectively corrected with calibration tools, so we decided to get to work.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

After calibration, we managed to correct the white balance to almost perfection. Older SDR content looks fantastic — most errors are within a value of 2, which is definitely below the threshold of human perceptibility. In HDR, we also brought the white balance to an acceptable level, but a different problem arises here. So why are there still relatively large errors in colour reproduction? This is mainly due to the limited colour palette and the way the television manages brightness. The global dimming technique used does not give the user control in the settings, so analysing the EOTF curve in HDR films, it's clear that the Q8F can modify luminance on its own. This can be seen as a limitation, but still, the image after calibration is much more enjoyable to watch than in the factory version.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

Let's see how the Q8F handles older content, which often has poor quality. Starting with the positives: the upscaling works really well. The TV performs nicely with both classic television and materials from YouTube, not giving the impression that we're dealing with something completely unattractive. It struggles more with content in very low resolutions, such as 576p — the image can be cropped, and unfortunately, the overscan phenomenon cannot be disabled. Moreover, the digital processing does not look great either. The noise reduction feature, instead of removing unwanted artefacts, smooths out almost everything: film grain (which many viewers desire) disappears along with the texture of the image, and actors' faces start to resemble characters from cheap Turkish soap operas. It's hard to consider this option useful — it's best left completely off. Perhaps Samsung will refine the function’s performance in updates, but for now, it’s difficult to view it as anything other than an unnecessary addition.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

Due to the applied 60 Hz panel, it's hard to call the Q8F a television made for gaming or watching sports. The panel isn't particularly fast, making motion blur clearly visible. If you were expecting a spectacular, almost 'stadium-like' experience during broadcasts, you might feel a bit disappointed. Fortunately, for movies and series, Samsung hasn't given up on the motion smoothing function. It's nothing more than a smoother that allows for improved fluidity of productions recorded at 24 or 30 frames per second. This way, you can decide for yourself whether you prefer a more fluid, 'television-like' image or to retain the cinematic character. It all depends on the viewer's preferences, and the ability to adjust this parameter is undoubtedly a plus.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

It's not entirely clear what Samsung has messed up this year with its TVs, but the Q8F isn't free from all the confusion with updates and shortcomings. While its older cousin, the Q67D, could still be recommended with a clear conscience to casual gamers, it's hard to find a reason to do so here. Aside from the automatic game mode and the attractively designed Game Bar, we get practically nothing that could appeal to gamers. The lack of proper HGiG implementation is a major issue, especially since the feature simply disappeared after the 1126 update. The situation with VRR is even worse. Even though it appears in the manufacturer's brochures and shows up in the Game Bar, we couldn't get it to work. The Xbox Series X console wouldn't allow it to be activated at all, and the option remained greyed out and inactive. It's difficult to praise such a TV even to casual gamers, which is a shame because Samsung has had a strong selling point in the gaming segment for years.

[UPDATE] We have updated our 2025 Samsung TV reviews following the release of firmware version 1131, which officially restores the essential HGiG (HDR Gaming Interest Group) support.