PHILPS PUS9060 vs Samsung Q6F (IPS)

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even talk about any "high dynamic range" or HDR effect. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another issue is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire screen to artificially improve the black levels. This results in the image becoming even darker, with brightness sometimes dropping below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not of the highest quality, as the coverage of the DCI-P3 colour gamut does not exceed 90%. Because of this, colours in HDR content may simply appear unsaturated.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

We tested the television in Filmmaker mode, which showed us two completely different sides of this model. Looking at SDR content, we were honestly shocked at how good this television looks straight out of the box. It was really hard to pick on anything here. Despite a slight 'messiness' in white balance and some slightly brightened details in the blacks (which directly stems from the IPS panel construction), colour errors hovered around the '2' level. This is not only a surprisingly good result but rather phenomenal, considering the price of the device.

On the other hand, what the Q6F showed in terms of colours when switched to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so massive that our charts literally ran out of scale. Of course, since Samsung even in such a budget model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at a level of "1" are something typically seen in devices costing several thousand dollars. In this respect, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our intervention in HDR mode did not yield a noticeable improvement. The television, due to its weak blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR primarily exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good, even for such an inexpensive QLED model. The only downside is when watching very low-resolution materials like 576p (typical for old DVD players) – the image may appear slightly cropped. This is because the TV does not allow the option to turn off the Overscan feature, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, or the attempt to smooth the image of unwanted artifacts. Here, the TV completely fails. Although in the menu we find a feature called "Noise Reduction," it does not produce any noticeable results regardless of the slider setting. The only thing it seems to do is introduce undesirable errors into the image. Despite its presence in the system, we definitely do not recommend using it.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The 60 Hz panel in the Samsung Q6F is standard in this price range, making it a rather average model for dynamic sports or gaming. However, when it comes to movies, the TV performs quite well thanks to its smoothing feature. The "Motion Vibration Reduction" option allows you to adjust the motion smoothness to your own preferences – from preserving a cinematic feel to full smoothness.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does include features like ALLM (Auto Low Latency Mode) and VRR frame syncing for consoles, that's pretty much where the list of advantages ends. Beyond these basics, the television offers nothing more that could satisfy those who spend a lot of time in front of a console. It's a real shame that a useful tool like Game Bar, which allows for quick control of game parameters in higher-end Samsung models, is missing here. In terms of gaming, this is an absolutely basic model and it will only suit 'casual' gamers.