PHILPS PUS9060 vs LG OLED C6 (WOLED)

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

The HDR performance of the LG C6 is really very good. LG Display’s new WOLED panel has mainly brought a significant increase in brightness. In our unit we measured around 1500 nits and, importantly, the TV can show similar values in many normal movie scenes as well. That gives HDR real punch. Bright highlights, lamps and sunlight can be genuinely intense, and most HDR movies simply look very impressive. Of course it’s still an OLED, so brightness falls in scenes with a lot of white. The fifth scene from the movie The Meg illustrates this well, where the C6 reached around 600 to 700 nits. That’s still a very good result, but it also shows the new panel hasn’t shed all the limitations typical of OLEDs.

Colours

When it comes to colours, it’s also hard to raise major objections. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice colours are very saturated and, importantly, stable regardless of the scene. That’s worth emphasising, because not every TV behaves the same in this respect. In some RGB Mini LED models colour saturation can depend more strongly on image brightness. A wider colour gamut today is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to produce suitably saturated colours in most movie scenes.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

Right out of the box the LG C6 is quite well set up, especially if you choose the Filmmaker mode. In SDR material the white balance is decent, although as brightness increases there is a slight lack of red. The image becomes a bit cooler, but not enough for it to be very noticeable during normal viewing. More is happening in the brightness characteristic. Gamma is a little low and instead of holding at 2.4, for a large part of the range it sits closer to 2.1–2.2. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a darkened room.

In HDR the situation is a bit more interesting. The start of the greyscale looks very good, but from about 20–30% brightness the white balance starts to drift increasingly. As brightness rises there is more red and a noticeable lack of blue. In the brightest sections the difference is already significant and also affects the reproduction of some colours. The EOTF curve itself is followed quite well through most of the range. The C6 only tends to slightly brighten the image, which we also saw in our film comparisons. The largest deviation appears around the brightest parts, where the TV starts adapting the signal to the panel's capabilities.

The factory Filmmaker setting in HDR is therefore not perfect, but overall performs well. The biggest area for improvement is the white balance, especially at high brightness.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

LG TVs have long responded very well to calibration, and the C6 is no exception. After adjustments we managed to set the white balance practically perfectly, and most colour errors fell below 3, often down to around 2. In practice this means very accurate colour reproduction in both SDR and HDR. An interesting detail only appeared with the HDR brightness response. On a classic EOTF chart everything looks almost perfect and at first glance it would be hard to find fault. Only when we measured the TV’s behaviour using filters based on real film scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many viewers may even see it as a positive, because HDR looks a bit more striking as a result. From the point of view of fidelity to the source material, however, it’s not ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is rather unusual for LG. In previous generations the brand’s TVs typically held very closely to the reference picture curve after calibration. The C6 is still very close to the standard, but that subtle brightness 'boost' can indeed be noticed in films and TV series.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

Here the LG C6 has taken a really big step forward. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very close. That's a big plus, because in this area LG's processor this year performs excellently. The "Smooth Gradation" function works particularly well. With heavily compressed material it can effectively hide ugly tonal banding and artefacts that often appear, for example, in lower-quality streaming. It's best to leave it on the "Low" setting. Then the improvement is clear, and the TV doesn't yet start blurring fine detail. Higher levels smooth the image more aggressively, but can already remove some of the natural texture of objects on screen. Upscaling itself also performs very well. Lower-resolution content is properly sharpened, edges look clean, and the processor quite effectively reconstructs fine details. In that respect the C6 is really close to LG's best TVs and the differences compared with the G6 are small.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sport and consoles we’ll of course be limited to 120 Hz at most, but even then it’s hard to fault the motion clarity. As you’d expect from an OLED, the panel’s response time is near-instant. Moving objects therefore don’t leave the characteristic smearing you still see on LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during dynamic movement.

For movies and TV, LG has also included a motion smoothing system called TruMotion. In the user settings you’ll find two separate sliders. De-Judder is primarily for low-frame-rate material, namely movies and TV series at 24 fps. You can use it to slightly reduce the characteristic judder or increase it if you prefer a much smoother picture. De-Blur, on the other hand, is useful for higher-frame-rate content, mainly sports broadcasts and 50/60 fps TV.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

LG has long focused heavily on gamers, and the C6 essentially lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can even run at 165 Hz. On top of that there’s VRR from 40 to 165 Hz, ALLM and a properly functioning HGiG. Another big plus is support for Dolby Vision in games, so the Xbox Series X can use that format without giving up game mode. The package is rounded out by the Game Bar, which lets you quickly check key signal parameters and change settings without leaving your game. In terms of features alone, the C6 is one of those TVs it’s really hard to fault. Whether you play on PlayStation, Xbox or PC, practically everything you could expect from a modern gaming TV is available here.