PHILPS PUS9060 vs LG OLED B6

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year's B5. That's down to LG Display's new budget OLED SE panel. In practice this simply provides a bit more headroom and makes HDR look fuller in many scenes than on last year's lower-end OLEDs. That doesn't mean the B6 has no limitations. In very bright shots, when a large part of the screen is brightly lit, brightness can fall below 400 nits. This behaviour is typical of OLED TVs (especially in this segment), and it's then you see the biggest difference compared with pricier models. All the same, we rate the B6's results as really solid. It's still not a TV built to break brightness records, but the HDR effect is strong enough that films really feel like a step up from ordinary SDR picture.

Colour gamut

Using the OLED SE panel has had some impact on wide colour-gamut coverage. Compared with last year's model the figures have dropped by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn't mean the colours on the LG B6 are weak. In most films and TV series they look vivid, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD-OLED panels. This is due to the WOLED panel structure. In addition to the red, green and blue subpixels it also uses a white subpixel that helps boost brightness. This comes at a cost: at very high luminance some of the colour is effectively 'diluted' by the white light, so saturation of some hues can be slightly lower. Day-to-day it's not a big problem, but you can see it in the most demanding scenes.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes give very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is a far better starting point than Vivid or Eco, where the picture is heavily boosted and noticeably less natural. For SDR content the factory settings perform really well. Colour errors are small, gamma behaves correctly, and the picture looks natural during regular viewing and does not seem overly enhanced.

It's a bit worse with HDR. Once you start playing that kind of content it's quickly apparent the white balance isn't perfectly set. Too much blue and red makes the image take on a slightly pink tint. Colour gamut measurements and the ColorChecker confirm this, with samples clearly shifting in that direction. It's not a defect that completely ruins the picture, but you can notice it with HDR films. So anyone who wants the most faithful image should consider calibration, which we cover later in the review.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

During calibration we focused mainly on HDR material, because that’s where the factory settings needed the most correction. We didn’t neglect SDR, though. After tuning it was brought almost to perfection. Colours are very accurate and brightness is controlled as it should be. The biggest change in HDR came from improving the white balance. After removing excess red and blue the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colours that had previously leaned towards pink improved. After calibration most errors fell below Delta E 2-3, the threshold at which an average viewer stops noticing differences with the naked eye. So the LG B6 can produce a very accurate picture, especially for the manufacturer’s entry-level OLED model.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

LG B6 copes very well with lower-quality material. Much of that is down to effective digital image processing, which can mask some source imperfections without excessively smoothing the whole scene. The "Smooth Gradation" feature proves particularly useful. It lets you noticeably reduce posterization mentioned earlier, especially in dark parts of the image. The safest choice is to set it to Low or Medium. The feature still effectively smooths out harsh tonal transitions, but doesn't yet interfere too much with fine details. Die-hard purists can of course leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a fair amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations are only noticeable with very poor sources below 720p, where the smallest text and fine elements aren't always perfectly sharp, but this is true for almost every other TV on the market.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

One of the biggest advantages of OLED panels is their very fast pixel response time. That keeps the picture sharp and prevents visible smearing that often appears on LCD TVs. It does have a downside, though. During slow camera pans motion can look a bit choppier than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 this is easy to tame with TruMotion. With the motion smoothing set correctly you can get smoother motion without giving the picture an exaggerated soap-opera effect.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.

LG OLED B6 has plenty going for gamers; it's a complete base for the PS5, Xbox Series X/S or a solid PC. It comes with four full-size HDMI 2.1 ports with 48 Gb/s bandwidth, so you can forget about annoying cable swapping when you want to connect several newer devices at once. We get a full package of sync technologies, from classic VRR to G-Sync and FreeSync. The panel effortlessly syncs its refresh rate to the frame pacing produced by your console or graphics card. Of course ALLM is present: the B6 automatically recognises when a game is running and immediately cuts latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG means that after an initial calibration in the console settings the picture won't suffer from blown-out whites or lost detail in bright areas. The icing on the cake is the Game Bar. Instead of digging through the full menu mid-game, a single click lets you correct shadow visibility, tweak chosen parameters or simply check the display's current mode. All of this makes the LG B6 a great choice for gamers.