Philips PUS8359 (IPS) vs TCL C7L

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

TCL C7L is undoubtedly an extremely bright television. In synthetic tests on static patterns, it can achieve peak brightness of around 2800 nits. This is a phenomenal result, considering the price range it occupies. Unfortunately, tests with real movie scenes are not as spectacular as measurements of white squares. Brightness in real HDR footage drops in the C7L model to around 1200 nits. This is still a very good result, as this is the value at which the vast majority of contemporary films are mastered. However, when small, point-like elements appear on the screen, the brightness of these details drastically drops – even to around 400 nits – which somewhat diminishes the HDR effect. The television does this intentionally to maintain a better black level and to avoid a huge light bloom. This is somewhat explainable, but it also shows that Mini LED technology is not completely uncompromising in this regard. As for the HDR effect itself – alongside brightness, colours are of course key here. And these, thanks to the use of new, “super” quantum dots, are simply outstanding and among the best on the market. The television can achieve around 90% coverage of the ultra-wide colour gamut BT.2020 and 99% of the DCI-P3 gamut, easily matching the best RGB MINI-LED screens. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which can often be problematic in competing RGB Mini-LED televisions.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

When it comes to out-of-the-box colours, a new feature in TCL TVs – including the C7L model – is the presence of a new picture mode called Filmmaker Mode. This is significant news, as such a mode was not previously available from this manufacturer. By design, as the name suggests, the picture in this setting is intended to be delivered with the full intent of the film's creator. After our tests, we can confirm that it is undeniably the best built-in mode in this TV if you value true-to-life colour reproduction straight out of the box. However, we certainly wouldn’t say it is perfect. Like most devices on the market, this C7L also had its factory faults. The white balance in Filmmaker Mode leaned towards a slightly greenish-yellow hue, mainly due to an excess of green component and a noticeable lack of blue. Of course, for the average viewer, this won’t be a drastic flaw, but if you value perfect whites, natural skin tones, and harnessing the full potential of these new "super" quantum dots from the structure, then the TV is begging for professional calibration.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

After conducting a professional calibration, we were able to greatly improve the situation in the factory Filmmaker Mode. Following our adjustments, the errors in the ColorChecker test and across the entire wide colour gamut dropped below the threshold of human perception – that is, below a value of 3, which is indeed a very good result. The TCL C7L definitely benefits from such a treatment in terms of colour fidelity, and it's hard to deny that. However, the management of brightness in HDR content after calibration appears to be a bit worse. As I described earlier – even though we set this model up properly, when we turn on real film scenes on the television, it can manage its brightness in quite a peculiar way. It often brightens certain elements on the screen in a manner inconsistent with the creator's intent, which is visibly apparent on the EOTF graphs measured in specific films. Despite this flaw – or rather, this specific characteristic of the television – one cannot take away from it: after calibration, the C7L was able to reproduce the colours flawlessly.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

This point could be called in a sense the Achilles' heel of the C7L model. Unfortunately, this television uses an older chipset from MediaTek – the Pentonic 700 – which has never been known for outstanding digital image processing. This is clearly visible in the functioning of the gradual smoothing feature, which is responsible for reducing jagged edges and removing digital noise. It simply works very poorly – when set to a low level, its effectiveness is practically none. The only small plus here is that the algorithm doesn't mess up anything else in the image and doesn't forcefully blur details. The upscaling, that is, the scaling of the image from lower resolutions to 4K, performs a bit better. It is simply adequate and does not stand out in any particular way against the competition. However, it cannot be denied that the C7L would greatly benefit in this aspect if the manufacturer decided to use the newer Pentonic 800 processor, which is now being found in an increasing number of competitive models.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

TCL C7L features a native 4K panel with a refresh rate of 144 Hz, which can even ramp up to 288 Hz at lower resolutions when using a PC. These are certainly very high and commendable figures on paper, but in everyday life, it's worth remembering that almost all dynamic content you display on this television will still revolve around a maximum of 120 Hz. To tame this dynamism, the TV menu includes a motion smoothing system called "Motion Clarity." It offers several predefined modes, including a user mode, which we highly recommend setting manually using our tried-and-true guides on our YouTube channel. You’ll find two key sliders available. The first one, "Motion Blur Reduction," is responsible for reducing blurring and improving sharpness in 60fps dynamic content, such as sports broadcasts. The second slider, "Flicker Reduction," allows for the addition of artificial frames in movies and shows recorded at cinematic 24 or 30 frames per second. This naturally allows for the complete elimination of the annoying stutter effect during camera movement shots.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

When it comes to gaming, the TCL C7L is simply an outstanding television for gamers. With the presence of two full-bandwidth HDMI 2.1 ports at 48 Gbps, it provides access to all the key features that console and high-end PC owners require. We have a well-functioning ALLM mode with very low input lag and VRR frame synchronization, which operates within an impressive range from 48 to 288 Hz. Importantly, unlike some competitors, TCL has ensured a proper implementation of the console HDR10 HGIG profile and support for Dolby Vision in games. This is complemented by a very well-designed gamer panel, known as Game Bar, which even allows for editing its appearance and changing the theme to perfectly match the style of your console.

The only thing that can – and should – be critiqued here is the fact that the television only offers two full HDMI 2.1 ports, while the other two are older HDMI 2.0. This creates quite a significant logistical problem. Why? Because one of those fast ports also supports the eARC audio return channel. In practice, this means that if you connect a soundbar or home theatre system to the television, you’ll only have one available HDMI 2.1 port left. If you have two consoles or a console and a powerful computer at home, unfortunately, you’ll have to give something up or constantly juggle cables at the back of the unit while maintaining comfortable audio system control.