Philips PUS8359 (IPS) vs Sony Bravia 8 (XR80)

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

Sony Bravia 8 performs reasonably well in terms of HDR brightness. A maximum brightness level of 880 nits is satisfactory and allows for well-rendered lighting effects in most scenes. In the tested segments of the films Life of Pi and Sicario 2, the TV presents itself quite well, offering vibrant and detailed images that fully capture the atmosphere of these productions.

However, a greater challenge arises in a scene from the film The Meg, where the screen is entirely very bright. In such situations, the limitations of OLED technology become apparent, as the TV loses brightness, dropping to around 450 nits. Such a drop is less satisfying, especially when the entire scene requires intense lighting. Despite these limitations, Sony Bravia 8 remains a competitive model, offering excellent coverage of the DCI-P3 colour gamut and 74% coverage of the BT.2020 standard. This results in rich colours and precise details, significantly enhancing the quality of HDR content viewing and making for a pleasurable experience.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

The best factory mode available on the Sony Bravia 8 television is IMAX Enhanced, which provides the most cinematic experience, although it is not set up perfectly. The TV tries to replicate cinema settings as faithfully as possible, however, certain shortcomings are noticeable. Starting with white balance, both for SDR materials and 4K, there is a clear dominance of blue. This makes the picture appear too cold, taking away its naturalness. Tests using Colour Checker show that colours shift towards cooler shades, which may lead to less accurate colour reproduction and makes the image less realistic.

As for brightness and contrast characteristics, gamma shows a significant drop at the end of the graph. This means that dark details may be too dim, while bright elements are too bright, causing them to lose subtlety and become less visible. As can be seen in the sky - in the comparison photo. Meanwhile, the EOTF curve is significantly above the reference value, causing the bright elements of the image to be too intense. As a result, users may perceive the image as unnatural, and bright areas may lose detail, negatively impacting the overall viewing quality.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

The calibration process of the Sony Bravia 8 television has brought significant improvements in image quality. The white balance has been distinctly enhanced, both for SDR content and 4K HDR, with minimal errors in the middle section of the graph. Gamma proved to be one of the biggest beneficiaries of the calibration – it has been completely stripped of previous drops, which significantly affected brightness stability and better detail reproduction in dark parts of the image. The EOTF curve has also been levelled out, making bright elements of the image appear more natural, and the overall tonal dynamics are now more balanced.

However, the most attention should be paid to colour reproduction, where despite the calibration, there are still some issues. Sony has omitted the use of a CMS system in this model, which allows for very precise control over colours. Consequently, the Colour Checker test for 4K materials still shows significant errors in colour samples. Despite these difficulties, we recommend carrying out the calibration, as the effects are noticeable and significantly enhance image quality, especially in terms of brightness and contrast.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

The fluidity of tonal transitions in low-quality materials on the ChooseTV 8 is lacking. Unfortunately, the gentle gradation feature (which was available in previous models) is missing, which is a significant downside. The digital noise reduction function can improve tonal transitions quite well, but it also tends to remove some details, such as clouds in scenes from the film The Martian, which may not appeal to everyone. When it comes to digital processing, the Sony XR80 TV performs quite well. The model in the test scenes is displayed without noticeable errors, and the branches in the background are not overly jagged. This shows that ChooseTV 8 is capable of processing complex image details at low resolution well.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

Sony Bravia 8 offers a maximum refresh rate of 120 Hz, which lays the groundwork for smooth viewing of dynamic content such as sports and games. As a result, movements are sharp and fluid. For more demanding users, the Sony XR80 television is equipped with an advanced motion smoothing system, which is divided into three segments: Smoothness (Film), Smoothness (Camera), and Clarity. The first two are responsible for adjusting the level of blur and smoothing of the image. The third option, concerning clarity, will be described in more detail below. Each of the parameters can be tailored to personal preferences, allowing users to find the optimal setting suited to their individual needs.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

Sony Bravia 8 has significantly improved its compatibility with consoles compared to earlier models. The TV supports variable refresh rate (VRR), which eliminates screen tearing, and is compatible with graphics cards, ensuring smooth visuals. The auto low latency mode (ALLM) reduces input lag, which is crucial in fast-paced games. Dolby Vision with low latency additionally provides impressive HDR effects that look fantastic during gameplay.

The Sony XR80 TV also features a Game Bar, which allows quick access to settings and monitoring parameters while gaming. An interesting option is the ability to enable a virtual crosshair on the screen, which can provide a slight advantage in shooter games.

A downside is the lack of support for 1440p@120hz resolution, which could make gaming easier for users with less powerful graphics cards. Additionally, the Sony XR80 only has two HDMI 2.1 ports, one of which is typically used to connect an audio system via eARC, limiting the number of available ports for connecting next-gen consoles.