Philips PUS8359 (IPS) vs Sony BRAVIA 7 II

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode for watching, Professional, we measured about 2,000 nits of peak brightness, so the panel’s capabilities are truly large. Of course, in Mini-LED sets a test-pattern result is only part of the story, because much still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform really well. Depending on the scene, the brightness we measured in films ranged from about 1,100 to as much as 1,700 nits. That’s a level at which HDR has proper punch and bright highlights can be genuinely impressive. It’s not perfect in every situation. With small bright elements on a very dark background, the Bravia 7 II clearly prioritises maintaining good black levels, so their brightness can fall to around 500 nits. It still looks good, but it’s clear the TV doesn’t always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is where True RGB was meant to deliver one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured roughly 98% DCI-P3 coverage and 88% BT.2020, so the potential for showing highly saturated colours is substantial. In RGB TVs the matter is a bit more complex. When we repeated the same measurements with a film-like background applied, gamut coverage dropped to about 92% DCI-P3 and 78% BT.2020. Those are still good numbers, especially for an RGB Mini-LED TV, but they show that the final result largely depends on how the algorithms drive the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain strong saturation. The biggest differences are visible in blue shades, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primaries. True RGB therefore offers genuinely greater potential, but, as with brightness, a lot depends on what’s actually happening on screen.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available presets. It's not perfect. In SDR the white balance is slightly biased toward magenta, so some scenes look a little warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. As a result the image is a bit too dark in places, especially in the mid-tones. In HDR the situation is better. As brightness increases there's a little too much red, but it isn't something that really jumps out while watching. Overall the Professional mode is a good starting point, though you can get a bit more out of it with calibration.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

After calibration the Bravia 7 II can look significantly better. First and foremost, we managed to set the white balance very well in both SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users those changes will have the biggest impact on the picture. There is, however, a limitation with the colours themselves. On the Bravia 7 II Sony does not provide access to a traditional CMS that would let us adjust individual hues separately. Much is left to the algorithms controlling the True RGB backlight. If the TV reproduces a specific colour inaccurately, we are not always able to do anything about it. In our measurements this is most apparent in parts of the reds and blues, where errors can still be quite large. That does not, however, undermine the value of calibration. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference from the factory settings is noticeable.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of Sony's biggest advantages over the competition. Sony has for years excelled at digital image processing, and it's clear here too. Above all, the 'Smooth Gradation' function works very well, smoothing weaker tonal transitions in poorer-quality content. The safest setting is low, but we'd comfortably recommend medium as well. The effect is stronger, and the TV still handles fine detail very delicately. Some minor details may be slightly smoothed, but Sony does it much more subtly than many other brands. Upscaling is also very good. Lower-resolution content is nicely upscaled to 4K; the image looks clean and retains a lot of detail. Of course the TV won't magically turn native HD into true 4K, but the Bravia 7 II does very well with what can be pulled from such a source.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you'd expect from a TV of this class. With sport or games at 120 fps the picture is suitably smooth, and for films Sony provides an advanced motion interpolation system. You can therefore adjust the level of interpolation separately and choose whether to retain a more cinematic motion or achieve noticeably greater smoothness. Motion blur itself is a bit worse. The VA panel used isn't among the fastest, and moving objects can show a slight trailing, especially against darker backgrounds. It's not at a level that will seriously disturb normal viewing, but last year's Bravia 7 was better in this regard and had a noticeably faster panel.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

Bravia 7 II has pretty much everything you'd want from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to low-latency mode. HGiG works correctly, so once you configure HDR on the console the TV won't try to brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Another plus is Dolby Vision in game mode, which will be especially useful for Xbox owners. Sony also includes its own Game Menu, where you can quickly view key signal info, check VRR or change gaming settings without digging through the full TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz. Our biggest complaint is not really about the features but the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 with 48 Gbps bandwidth. One of those is also the eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you only have one full HDMI 2.1 left for a console or PC. With a single console that's fine, but with a PS5, an Xbox and an audio setup it starts to feel cramped. That's hard to justify from Sony. In cheaper TVs two HDMI 2.1 ports can still be accepted, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.