Philips PUS8359 (IPS) vs Samsung R85H / R86H

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

When it comes to brightness, the R85H performs quite well. In most of our test scenes the TV reaches around 800–900 nits, and with larger bright elements it can exceed 1000 nits. These aren't, of course, on the level of the most expensive Mini-LEDs, but they're more than enough for watching films and TV series in HDR and the effect can be quite noticeable. The problem reappears in more demanding scenes, where there's a small bright element on a very dark background. Here the TV can greatly reduce its brightness to avoid lighting up too much of the screen. In our measurements such small highlights fell as low as around 200–250 nits, so it's clear that a limited number of local dimming zones combined with the specific behaviour of the algorithm has consequences here. Fortunately, it doesn't affect viewing all the time. In typical, mixed HDR scenes the R85H looks good and can provide good image dynamics. It's just that with very small points of light you shouldn't expect as strong an effect as on TVs with a much larger number of zones or on OLEDs.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

In Filmmaker mode our R85H sample in SDR performed adequately, but a few issues immediately stood out in the measurements. In the white balance, as brightness increased more red was added while blue decreased. As a result, the brighter parts of the image had a slightly too-warm tint. Gamma only held the target value at the start. It then gradually fell, which left most of the image a little too bright. The combination of these two factors also affected the colours, with errors growing particularly in the brighter and more saturated samples. It did not look bad, but for Filmmaker mode we expected a bit more accuracy. Interestingly, our sample fared noticeably better in HDR. The white balance was much more even and the individual components stayed close to one another across most of the range. Only in the brightest parts did red start to be lacking, causing white to shift subtly. The EOTF curve looked very good, tracking the target luminance across almost the entire range. That does not mean HDR colours were perfect. The Colour Checker still shows some deviations, especially for some of the more saturated colours, but the errors are clearly smaller than in SDR.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

After calibration the R85H shows it has really substantial colour reproduction capabilities. SDR performed best: white balance could be brought almost perfectly into line, and gamma stays very close to the target value across most of the range. That also translated into very low errors in the ColorChecker, so there's really little to criticise here. HDR also shows a clear improvement, although some issues can't be corrected as well. At the highest brightness levels the character of the backlight itself becomes apparent and the individual components of the white balance begin to diverge. The same applies to the most saturated colours, which don't always land exactly where they should. Despite these limitations the overall picture is considerably more accurate than factory settings, and the biggest difference is definitely visible in SDR. However, there is one thing calibration can't fix. With heavily saturated elements the colour can slightly bleed onto adjacent bright areas of the image. It's easiest to notice on white, which can pick up a faint tint of a neighbouring hue. It doesn't occur in every scene, but when the material is demanding the effect can be visible. This is more a feature of the way the RGB backlight operates than an issue with picture settings.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

In the R85H, image processing is handled by the Micro RGB AI Processor. The name is new, but when it comes to upscaling lower-quality sources, the TV's behaviour is very similar to what Samsung has shown before. And that's not a bad thing, because Samsung has handled this aspect quite well for years. Lower-resolution material is displayed cleanly, edges don't become overly soft, and the TV doesn't try to artificially extract detail at all costs. The result is simply balanced, and for regular TV or older recordings the R85H performs as you'd expect from Samsung at this level. There's still a small downside: overscan, which can't be completely switched off at the lowest resolutions. Another matter is the extra processing applied to low-quality sources. The R85H can smooth posterization and tidy up heavily compressed footage, but it's worth emphasising that it does so relatively aggressively. At stronger noise reduction settings it starts removing not only compression artefacts but also fine detail and the natural film grain. So it's best to use it only when the source actually needs it.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

R85H has a 144 Hz panel, so motion handling is really good here. You should remember that the extra hertz above 120 will mainly be used when connected to a computer, so in this category we don't treat them as any particular advantage. For films and TV, what's more important is that the panel is fast enough to provide access to an advanced motion smoothing feature, "Motion Clarity", which lets us set motion from more film-like to very smooth. The panel's response time is a bit worse. Since it's a VA panel, fast-moving objects can leave a slight trail. On a bright background this isn't very noticeable, but the darker the scene, the more noticeable the smearing becomes. This is a typical characteristic of this type of panel and it's easiest to spot in dark scenes.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

Samsung has been steadily expanding its gamer features for several years, and the R85H really doesn't lack anything important. The TV supports 4K at 120 Hz, VRR and ALLM, so it can easily make full use of the PlayStation 5 or Xbox Series X. HGiG also works properly, so when HDR is set correctly on the console, games maintain their intended brightness and you don't unnecessarily lose detail in the brightest parts of the image. The only bigger omission is Dolby Vision Gaming, which Samsung doesn't support on any of its TVs.

The Game Bar is also very useful, a handy menu you can bring up without leaving the game. You can quickly check the frame rate, VRR status or change the key picture settings. Samsung also includes a few less obvious features, like the ability to change the aspect ratio or Game Motion Plus, which can further smooth games running at 30 or 60 fps. Of course this comes at the cost of higher input lag (around 55 ms), but for slower-paced titles it may be an interesting option for some.