Philips PUS8359 (IPS) vs PHILPS PUS9060

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.