Philips PUS8359 (IPS) vs Philips PUS7000

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.