Philips PUS8209 vs LG OLED B6

Unfortunately, this is where the problems start. A maximum brightness of 280 nits is definitely too low to experience the true effect of HDR. In practice, the image resembles standard SDR more, so it's hard to talk about deeper visual experiences. On the plus side, the colour gamut coverage is 91.4% DCI-P3, which will be sufficient for most films. It's also worth noting that the image is stable and there are no issues with sudden brightness or colour changes. Overall, HDR on this television is more of a formality than an actual added value. If we're looking for genuine HDR emotions, this model may not meet expectations.

LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year's B5. That's down to LG Display's new budget OLED SE panel. In practice this simply provides a bit more headroom and makes HDR look fuller in many scenes than on last year's lower-end OLEDs. That doesn't mean the B6 has no limitations. In very bright shots, when a large part of the screen is brightly lit, brightness can fall below 400 nits. This behaviour is typical of OLED TVs (especially in this segment), and it's then you see the biggest difference compared with pricier models. All the same, we rate the B6's results as really solid. It's still not a TV built to break brightness records, but the HDR effect is strong enough that films really feel like a step up from ordinary SDR picture.

Colour gamut

Using the OLED SE panel has had some impact on wide colour-gamut coverage. Compared with last year's model the figures have dropped by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn't mean the colours on the LG B6 are weak. In most films and TV series they look vivid, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD-OLED panels. This is due to the WOLED panel structure. In addition to the red, green and blue subpixels it also uses a white subpixel that helps boost brightness. This comes at a cost: at very high luminance some of the colour is effectively 'diluted' by the white light, so saturation of some hues can be slightly lower. Day-to-day it's not a big problem, but you can see it in the most demanding scenes.

Philips PUS8209 offers many picture modes, but the best of them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its distinct problems. For HD content, the white balance is characterised by a strong dominance of red, causing the image to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in mid-tones, has serious issues at the beginning and end of the graph. Drops in shadows result in a loss of detail in dark areas, and spikes in bright areas make some elements look unnatural.

For high-quality content in 4K HDR, the situation reverses. In this case, blue dominates, leading to an artificial image boost effect, reminiscent of unnatural retail settings. Such an image looks unappealing and does not align with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference graph, causing the image to appear too dark, stripping depth and detail from HDR content.

Against this backdrop, the errors in the Color Checker test and deviations in colour palette reproduction are exceptionally large, which further negatively affects the overall image quality. The Filmmaker mode, while the best among those available, requires substantial corrections to truly convey the full vision of the director.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes give very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is a far better starting point than Vivid or Eco, where the picture is heavily boosted and noticeably less natural. For SDR content the factory settings perform really well. Colour errors are small, gamma behaves correctly, and the picture looks natural during regular viewing and does not seem overly enhanced.

It's a bit worse with HDR. Once you start playing that kind of content it's quickly apparent the white balance isn't perfectly set. Too much blue and red makes the image take on a slightly pink tint. Colour gamut measurements and the ColorChecker confirm this, with samples clearly shifting in that direction. It's not a defect that completely ruins the picture, but you can notice it with HDR films. So anyone who wants the most faithful image should consider calibration, which we cover later in the review.

After calibration, the white balance for HD and 4K content has significantly improved. While we haven't achieved a perfectly flat characteristic, the result is definitely better than before. The image on the television no longer appears either artificially warm or overly cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted – the most significant issues at the beginning and end of the graph have been mitigated. The EOTF curve, which is responsible for brightness in 4K HDR materials, has been stabilised, eliminating problems with excessive dimming of the image. In the colour palette test, some imperfections can still be seen due to the average coverage of the wide colour gamut, which is a limitation of the hardware itself. Nevertheless, the final result is clearly better than pre-calibration – the image looks more natural and approaches the expectations for Filmmaker mode.

During calibration we focused mainly on HDR material, because that’s where the factory settings needed the most correction. We didn’t neglect SDR, though. After tuning it was brought almost to perfection. Colours are very accurate and brightness is controlled as it should be. The biggest change in HDR came from improving the white balance. After removing excess red and blue the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colours that had previously leaned towards pink improved. After calibration most errors fell below Delta E 2-3, the threshold at which an average viewer stops noticing differences with the naked eye. So the LG B6 can produce a very accurate picture, especially for the manufacturer’s entry-level OLED model.

The television offers a “Distortion Reduction” feature that effectively improves the gradation of tonal transitions, particularly when set to the minimum level. Unfortunately, this comes at a cost – the feature also smooths out details like material textures. On the plus side, it’s worth noting that the operation of this option does not negatively affect the film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, issues with aliasing of certain elements, such as branches or small details, can sometimes be noticed, which may decrease the quality of the reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

LG B6 copes very well with lower-quality material. Much of that is down to effective digital image processing, which can mask some source imperfections without excessively smoothing the whole scene. The "Smooth Gradation" feature proves particularly useful. It lets you noticeably reduce posterization mentioned earlier, especially in dark parts of the image. The safest choice is to set it to Low or Medium. The feature still effectively smooths out harsh tonal transitions, but doesn't yet interfere too much with fine details. Die-hard purists can of course leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a fair amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations are only noticeable with very poor sources below 720p, where the smallest text and fine elements aren't always perfectly sharp, but this is true for almost every other TV on the market.

The 60 Hz panel in the Philips PUS8209 is mainly suited for watching movies, but here you can also feel a certain shortcoming. The television does not offer any motion smoothing that would allow you to adjust the fluidity of the picture to individual preferences, which for some users may be disappointing.

One of the biggest advantages of OLED panels is their very fast pixel response time. That keeps the picture sharp and prevents visible smearing that often appears on LCD TVs. It does have a downside, though. During slow camera pans motion can look a bit choppier than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 this is easy to tame with TruMotion. With the motion smoothing set correctly you can get smoother motion without giving the picture an exaggerated soap-opera effect.

Philips PUS8209 offers basic features useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and Game Bar, which makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the TV will not meet the expectations of more demanding gamers who are looking for higher fluidity and precision of image. Additionally, this model does not support any HDR mode dedicated to gaming, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.

LG OLED B6 has plenty going for gamers; it's a complete base for the PS5, Xbox Series X/S or a solid PC. It comes with four full-size HDMI 2.1 ports with 48 Gb/s bandwidth, so you can forget about annoying cable swapping when you want to connect several newer devices at once. We get a full package of sync technologies, from classic VRR to G-Sync and FreeSync. The panel effortlessly syncs its refresh rate to the frame pacing produced by your console or graphics card. Of course ALLM is present: the B6 automatically recognises when a game is running and immediately cuts latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG means that after an initial calibration in the console settings the picture won't suffer from blown-out whites or lost detail in bright areas. The icing on the cake is the Game Bar. Instead of digging through the full menu mid-game, a single click lets you correct shadow visibility, tweak chosen parameters or simply check the display's current mode. All of this makes the LG B6 a great choice for gamers.