Philips PUS8209 vs LG MRGB85B

Unfortunately, this is where the problems start. A maximum brightness of 280 nits is definitely too low to experience the true effect of HDR. In practice, the image resembles standard SDR more, so it's hard to talk about deeper visual experiences. On the plus side, the colour gamut coverage is 91.4% DCI-P3, which will be sufficient for most films. It's also worth noting that the image is stable and there are no issues with sudden brightness or colour changes. Overall, HDR on this television is more of a formality than an actual added value. If we're looking for genuine HDR emotions, this model may not meet expectations.

LG MRGB85 offers moderate brightness. On test patterns it reaches around 700 nits, which is a decent result in itself. In real movie scenes, however, values are lower and most often fall in the 400 to 600 nits range. Bright, wide shots look best. In scenes with large areas of black the TV noticeably reduces luminance, attempting to keep contrast as high as possible. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Particularly in darker parts of films, the limitations of the edge-lit backlight and imprecise local dimming become apparent again.

HDR colours

A much stronger suit of the MRGB85 is its colour. The TV covers around 95% of the DCI-P3 colour space and 74% of BT.2020, so HDR content can look vivid and impressive. Colours are well saturated, and the difference compared with basic LCD TVs is clearly noticeable. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colours is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and achieves more saturated red tones. This solution performs well for colour reproduction, but it does not change the limitations of the local dimming. The diodes are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

Philips PUS8209 offers many picture modes, but the best of them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its distinct problems. For HD content, the white balance is characterised by a strong dominance of red, causing the image to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in mid-tones, has serious issues at the beginning and end of the graph. Drops in shadows result in a loss of detail in dark areas, and spikes in bright areas make some elements look unnatural.

For high-quality content in 4K HDR, the situation reverses. In this case, blue dominates, leading to an artificial image boost effect, reminiscent of unnatural retail settings. Such an image looks unappealing and does not align with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference graph, causing the image to appear too dark, stripping depth and detail from HDR content.

Against this backdrop, the errors in the Color Checker test and deviations in colour palette reproduction are exceptionally large, which further negatively affects the overall image quality. The Filmmaker mode, while the best among those available, requires substantial corrections to truly convey the full vision of the director.

We tested the TV in Filmmaker Mode because, of the available presets, it produced the image closest to reference. The out-of-the-box colour reproduction wasn’t perfect, though. The biggest deviations were in the white balance, with too much red and not enough blue in the image, so the overall picture shifted noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright areas didn’t always look natural. It wasn’t a fault that ruined the viewing experience, but in a direct comparison with the same panel after calibration the difference was clearly visible.

After calibration, the white balance for HD and 4K content has significantly improved. While we haven't achieved a perfectly flat characteristic, the result is definitely better than before. The image on the television no longer appears either artificially warm or overly cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted – the most significant issues at the beginning and end of the graph have been mitigated. The EOTF curve, which is responsible for brightness in 4K HDR materials, has been stabilised, eliminating problems with excessive dimming of the image. In the colour palette test, some imperfections can still be seen due to the average coverage of the wide colour gamut, which is a limitation of the hardware itself. Nevertheless, the final result is clearly better than pre-calibration – the image looks more natural and approaches the expectations for Filmmaker mode.

Calibration primarily corrected the white balance and removed the previously noticeable warm cast. After the correction, whites no longer had a yellow tint and colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the image became more controlled, although not all of the TV’s limitations could be eliminated. The main issue remained intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations are still clearly visible.

The television offers a “Distortion Reduction” feature that effectively improves the gradation of tonal transitions, particularly when set to the minimum level. Unfortunately, this comes at a cost – the feature also smooths out details like material textures. On the plus side, it’s worth noting that the operation of this option does not negatively affect the film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, issues with aliasing of certain elements, such as branches or small details, can sometimes be noticed, which may decrease the quality of the reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

Upscaling and digital image processing perform quite well in the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution material, and you can easily turn off overscan regardless of the source. The TV also handles compression artefacts well. The "Smooth Gradation" function can effectively reduce visible banding and tonal unevenness, but it isn't always precise. At higher settings it can also smooth out fine details, such as the texture of materials. A plus is that it doesn't remove film grain. The safest option is the "Low" or "Medium" setting, which offers the best compromise between artefact reduction and preserving detail.

The 60 Hz panel in the Philips PUS8209 is mainly suited for watching movies, but here you can also feel a certain shortcoming. The television does not offer any motion smoothing that would allow you to adjust the fluidity of the picture to individual preferences, which for some users may be disappointing.

The LG MRGB85 is fitted with a VA panel with a native 144 Hz refresh rate, so its motion handling is very good. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera motion is noticeably smoother than on basic 60 Hz panels. There’s also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for live sports and TV programmes. The adjustment range is wide, so you can easily tailor the motion smoothing to your own preferences.

Philips PUS8209 offers basic features useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and Game Bar, which makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the TV will not meet the expectations of more demanding gamers who are looking for higher fluidity and precision of image. Additionally, this model does not support any HDR mode dedicated to gaming, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer hasn’t skimped on the kit and has essentially carried over the full suite of features from pricier TVs into this model. You get three HDMI 2.1 ports with full 48 Gb/s bandwidth. Each supports 4K 120 Hz from a console, and when connected to a PC also 4K 144 Hz. So you don’t need to worry which port to plug your console or PC into, as they all offer the same set of capabilities.

On board you’ll also find VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. Dolby Vision Gaming is included too, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it off is Game Optimizer, a handy in-game menu. Without leaving the game you can change the picture profile, brighten shadow detail or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as significantly more expensive LG models.