Philips PUS8079 vs TCL V6C

The maximum brightness in content with a wide tonal range at 202 nits is extremely low and practically prevents watching movies and series on streaming platforms in the highest quality. It's worth mentioning that in this case, using the HDR format equipped with dynamic metadata won't help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It’s also worth noting that PUS8079 uses WLED backlighting, which unfortunately is not the best solution, resulting in coverage of only 80% of the wide DCI-P3 colour gamut. The effect of this reality is significantly less intense colours in HDR content.

When it comes to HDR, the TCK V6C clearly shows that it is not its strong suit. A peak brightness of around 200 nits makes it difficult to talk about true HDR effects – the picture simply remains too dark to bring out details in bright scenes or convey the appropriate dynamics. Although the television formally supports many HDR formats, it is not practically equipped for such demanding content. The lack of additional layers that enhance colors, such as QLED or PFS LED, further limits the appeal of the image – in more spectacular productions, the colours may seem washed out compared to more expensive models. Therefore, the V6C will primarily serve as a television for everyday viewing, YouTube, or SDR content, rather than as equipment for high-quality cinematic experiences.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". While it was the best of the predefined modes, it still had significant discrepancies between what the filmmaker wanted to convey and what the tested television displayed. In both SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vibrant mode, with a blue tint reminiscent of what you see in retail displays. Moving directly to the SDR materials and what affects contrast, namely gamma, we see it being severely reduced. This leads to cutting off already minimal contrast resources and brightening the entire image. In the EOTF curve, responsible for the increase in brightness pace in HDR materials, we instead see a strong drop below the reference line, which, given the limited light output of the television, significantly impacted the perception of those contents, which were even more dimmed. We won’t separate the quality assessments of the colours themselves since, in both cases, they achieved astronomical deltaE values, being simply completely different from what they should be.

We started colour reproduction tests with the Filmmaker mode, which in theory should be the best choice straight out of the box. It certainly performs better than the Eco or Dynamic modes, which heavily interfere with the image and spoil its natural character. As you can see in the graphs, the factory tuning of the V6C is not ideal, although it's not a disaster either. The biggest issue turned out to be a lack of red – the TV clearly "cools" the image, which is especially noticeable on human faces, giving a "zombie skin" effect. This particular issue was the most bothersome during everyday viewing. Looking at the colour palette in HDR content, the shortcomings in red are also noticeable, and their source is the relatively narrow coverage of the colour space. Of course, every TV can be calibrated, so we decided to check how the V6C would perform after such an adjustment.

Luckily, Philips implements advanced image correction tools in all of its TVs. SDR content has benefited the most here, and the huge deltaE errors have been significantly corrected, with both white balance and gamma being substantially reworked. While we can't say it's reference-quality image, it's definitely better, and you can watch a movie or series without causing a headache, especially for your eyes. Naturally, HDR materials, due to the very low luminance of the TV, could not be corrected to the same high degree as those with a standard colour palette, but we managed to roughly straighten out the EOTF curve and the white balance. Unfortunately, that was all we could squeeze out of our unit, although it's worth noting that each unit is different and has entirely different errors, whether minor or major.

My dear friends – we haven't faced such a difficult "calibration battle" in years. The V6C turned out to be one of the most stubborn TVs we've dealt with in the office. The calibration trials alone took us several hours of work and required a lot of patience. We finally managed to slightly warm up the skin tones, which made faces stop looking like they were pulled straight out of a horror film, a common issue with the factory settings. Unfortunately, that wasn't the end of it – the TV reacted to our adjustments in white balance in a completely unpredictable manner. Where we expected stability in the image in a certain area, new errors appeared, and Color Checker measurements showed deviations that couldn't be rationally explained. It's hard to say whether the fault lay with the software or the design itself, but one thing is certain – the V6C put up exceptionally strong resistance. Ultimately, the calibration brought improvement, especially in SDR content, where the image became more pleasing and natural. However, it must be clearly stated that the design limitations remain. The TV still flattens the image in HDR materials and has noticeable deficiencies in colour reproduction. This is equipment more suited for everyday TV watching or SDR content rather than for cinematic experiences in the highest quality.

We will return once again to the issue of tonal transitions, but in the context of overall image quality improvement. As we can observe in the photo on the left, the gradation enhancement feature works brilliantly. Furthermore, it offers several settings, and each of them, even the lowest, provides a beneficial effect, and, what’s more, does not soften the film grain effect. We will repeat once again that this feature is the biggest advantage of the tested television.

Secondly, we will look at image scaling. Here, the tested television performed worse. We can notice, above all, the strongly jagged fine details and the characteristic white glow around figures. We must not forget about the significant artificial sharpening of the image.

When it comes to upscaling, the V6C doesn't bring anything groundbreaking to the table. Lower quality content is heavily sharpened, making the image look quite unnatural, at times almost artificial. This can be somewhat alleviated by reducing the sharpness level in the settings, but the effect isn't spectacular. The image still falls short of perfection. The digital processing itself performs better. The function responsible for smoothing tonal transitions works quite effectively, especially at the medium setting, where the image truly appears smoother. Unfortunately, its operation is rather aggressive – it heavily interferes with the overall scene, causing actors in the foreground to start looking like characters from super smooth soap operas. Therefore, we would not recommend using this option if a natural viewing experience is important to us.

This paragraph, unlike the others, will be extremely short. The reason for this situation is the lack of implementation of even the most basic motion smoothing function, which was to be expected given the price of the device. We also note that we are dealing with a VA panel, whose sharpness will not be the best under the sun. This type of panel is mainly associated with high contrast, which goes hand in hand with a relatively slow response time, as we can clearly read from the panel analysis results. As you can see, from the images captured in quick motion, the picture is blurred, typical for this type of panel. Although it may not be the ideal option, it can conditionally be used for watching sports, although one must keep in mind the less than optimal sharpness in motion. It's worth mentioning that movies will exhibit stuttering, as the television does not have any, not even the simplest, motion smoother.

Smoothing and motion fluidity are areas where the V6C quickly reveals its limitations. It's a 60 Hz TV, so it was hard to expect miracles here. In dynamic sports scenes, the image performs rather mediocrely. This is most noticeable in darker scenes, where distinct trails and blurred "halos" follow moving objects, which can be quite distracting. This is definitely a weaker point of this model. Fortunately, there is also a small plus. The V6C is equipped with a motion smoother that works while watching movies. Thanks to it, productions filmed at 24 frames per second, which is practically all cinema titles and series, can look smoother than they were actually recorded. Importantly, the intensity of the effect can be adjusted to personal preferences – from slight smoothing to the full "soap opera effect."

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic refresh rate adjustment, the image is actually quite smooth for this price range and does not 'tear' the image.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for settings adjustments 'on the fly'. This means we won’t have to exit the game to make any changes to the image. Importantly, it hasn’t been stripped of options known from higher models. We can find features such as shadow enhancement for better visibility in shadows and a colour filter for players with visual impairments.

Even though the V6C is not a TV designed with avid gamers in mind, TCL has included a few features that may appeal to more casual users. You'll not find a 120 Hz panel or HDMI 2.1 ports here, but there is an ALLM mode that automatically switches the TV into low latency mode. There's also a quite practical Game Bar – a simple panel allowing the preview of basic parameters, changing the picture mode, or even enabling a virtual crosshair on the screen. Another interesting feature is the support for Dolby Vision Gaming, intended for Xbox Series S/X consoles – a nice addition, although in practice it doesn’t offer as much as in more expensive models. However, the biggest issue remains the HDR configuration. The HGiG function, responsible for adjusting the brightness and contrast of games to the capabilities of the panel, doesn't respond as we would expect – the picture can be overly dark or too flattened. As a result, a better solution turns out to be simply playing in SDR mode, where the V6C operates steadily and doesn’t try to pretend to be an HDR TV.