Philips PUS8079 vs Dreame S100

The maximum brightness in content with a wide tonal range at 202 nits is extremely low and practically prevents watching movies and series on streaming platforms in the highest quality. It's worth mentioning that in this case, using the HDR format equipped with dynamic metadata won't help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It’s also worth noting that PUS8079 uses WLED backlighting, which unfortunately is not the best solution, resulting in coverage of only 80% of the wide DCI-P3 colour gamut. The effect of this reality is significantly less intense colours in HDR content.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest considering the competition in this price range. In full-screen scenes, it's clear that the television can generate an image that hits the mark in terms of brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of the HDR effect – and in a drastic way. In such scenes, the brightness of the bright elements fell below 100 nits, which is a downright tragic result, far from any HDR effect. This aspect can be improved, but there are caveats. You just need to change the local dimming setting in the television's menu; however, then the blacks in such scenes simply turn grey. It's a pity that Dreame wasn't able to refine the local dimming algorithms better, and the S100 is another example that the number of local dimming zones doesn't always translate into a better picture. As a consolation, it's worth noting that the Dreame S100 is marketed as a 'QLED' type television, although it actually uses a PFS LED filter. As a result, the colours are appropriately saturated, and our measured DCI-P3 colour gamut coverage exceeded 94%.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". While it was the best of the predefined modes, it still had significant discrepancies between what the filmmaker wanted to convey and what the tested television displayed. In both SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vibrant mode, with a blue tint reminiscent of what you see in retail displays. Moving directly to the SDR materials and what affects contrast, namely gamma, we see it being severely reduced. This leads to cutting off already minimal contrast resources and brightening the entire image. In the EOTF curve, responsible for the increase in brightness pace in HDR materials, we instead see a strong drop below the reference line, which, given the limited light output of the television, significantly impacted the perception of those contents, which were even more dimmed. We won’t separate the quality assessments of the colours themselves since, in both cases, they achieved astronomical deltaE values, being simply completely different from what they should be.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - not even a motion smoother. So how do the factory colours fare in the S100? Not too bad, but not great either. The TV itself had a noticeable blue tint, which is clearly evident in our white balance measurements. As a result, the picture was artificially brightened, and the colours had a slight bluish tint. This is also confirmed by the Color Checker palette, which showed how the colour samples leaned towards blue, generating quite significant colour errors. On the other hand, the picture looked definitely better in HDR mode, where the colour errors were not as prominent, although they were still far from ideal. Here, the white balance was also too heavily skewed towards blue, causing quite significant errors in color reproduction.

Luckily, Philips implements advanced image correction tools in all of its TVs. SDR content has benefited the most here, and the huge deltaE errors have been significantly corrected, with both white balance and gamma being substantially reworked. While we can't say it's reference-quality image, it's definitely better, and you can watch a movie or series without causing a headache, especially for your eyes. Naturally, HDR materials, due to the very low luminance of the TV, could not be corrected to the same high degree as those with a standard colour palette, but we managed to roughly straighten out the EOTF curve and the white balance. Unfortunately, that was all we could squeeze out of our unit, although it's worth noting that each unit is different and has entirely different errors, whether minor or major.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to the advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image instantly became much more natural and pleasant to view. After fully tuning the colours, the errors in the Color Checker test dropped below a Delta E value of 2-3. For the average viewer, this means that any colour distortions became almost impossible to see with the naked eye. It's really a nice surprise, as often new brands in the TV market have significant problems with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticise is the way the TV manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, our measured EOTF curve shows anomalies. In places where high highlights should appear, there is a slight bump in the curve above the reference line. In practice, this results in unnatural brightening of certain, the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

We will return once again to the issue of tonal transitions, but in the context of overall image quality improvement. As we can observe in the photo on the left, the gradation enhancement feature works brilliantly. Furthermore, it offers several settings, and each of them, even the lowest, provides a beneficial effect, and, what’s more, does not soften the film grain effect. We will repeat once again that this feature is the biggest advantage of the tested television.

Secondly, we will look at image scaling. Here, the tested television performed worse. We can notice, above all, the strongly jagged fine details and the characteristic white glow around figures. We must not forget about the significant artificial sharpening of the image.

For scaling and digital processing in the Dreame S100, the technology used is proudly called Dreamind™ Pro AI by the manufacturer. However, it must be clearly stated that this is not a proprietary processor but rather a marketing term for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about a rather outdated unit from a time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip also handles that. The upscaling in the S100 is fairly average, and the processor has a tendency to artificially over-sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a feature called "Contour Smoothing," which theoretically is supposed to improve tonal transitions. In practice, it contributes almost no improvement – setting it to any level rarely eliminates visible colour banding, but it can unnecessarily blur elements of the image that should remain sharp.

Another issue is the phenomenon of overscan (cropping the edges of the frame), which is practically visible all the time. Although there is the possibility to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you may know, this mode completely blocks any changes to other sliders in the picture menu. In our test tables, we noted that the television offers an option to disable overscan, as such a function technically exists in the system – however, in everyday use, while maintaining reasonable picture settings, you will not be able to take advantage of it.

This paragraph, unlike the others, will be extremely short. The reason for this situation is the lack of implementation of even the most basic motion smoothing function, which was to be expected given the price of the device. We also note that we are dealing with a VA panel, whose sharpness will not be the best under the sun. This type of panel is mainly associated with high contrast, which goes hand in hand with a relatively slow response time, as we can clearly read from the panel analysis results. As you can see, from the images captured in quick motion, the picture is blurred, typical for this type of panel. Although it may not be the ideal option, it can conditionally be used for watching sports, although one must keep in mind the less than optimal sharpness in motion. It's worth mentioning that movies will exhibit stuttering, as the television does not have any, not even the simplest, motion smoother.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a 144 Hz refresh rate panel, although in reality, the vast majority of people using it in a conventional way will still be limited to 120 Hz (as this is what today's hardware allows aside from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC motion smoother. In the menu, we find predefined modes that enable the TV to efficiently generate artificial frames, which effectively enhances the fluidity of dynamic sports shots, but also helps eliminate motion judder in film and TV series material recorded at 24 frames.

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic refresh rate adjustment, the image is actually quite smooth for this price range and does not 'tear' the image.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for settings adjustments 'on the fly'. This means we won’t have to exit the game to make any changes to the image. Importantly, it hasn’t been stripped of options known from higher models. We can find features such as shadow enhancement for better visibility in shadows and a colour filter for players with visual impairments.

The Dreame S100 seems almost like the ideal screen for gamers. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, allowing features such as automatic game mode (ALLM) or VRR frame synchronization in the range of 48-144 Hz to work seamlessly on consoles. On board, we also find a well-designed gaming panel (Game Bar). It allows you to continuously preview the most important parameters - from the activated picture modes, to the number of frames rendered by the console, right through to the option of adding a crosshair in the centre of the screen. All of this looks great on paper; however, the biggest issue with the S100 is its implementation of HDR in games. The television does not have a correctly implemented HGiG format. This means a clueless user may misconfigure the console during the initial setup of the screen. Poor configuration can result in an image that is too dark or overexposed (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often did not activate at all on the XBOX – Dreame S100 line. And when it was eventually activated, playing was impossible due to the very high input lag often exceeding 100ms. If the manufacturer manages to improve the HDR gaming experience with an update, the S100 will be truly outstanding hardware for gamers. For now, however, compromises must be accepted.