Philips PUS8079 vs Blaupunkt UGC5500S

The maximum brightness in content with a wide tonal range at 202 nits is extremely low and practically prevents watching movies and series on streaming platforms in the highest quality. It's worth mentioning that in this case, using the HDR format equipped with dynamic metadata won't help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It’s also worth noting that PUS8079 uses WLED backlighting, which unfortunately is not the best solution, resulting in coverage of only 80% of the wide DCI-P3 colour gamut. The effect of this reality is significantly less intense colours in HDR content.

We won’t beat around the bush here – if you’re looking for a TV strictly for cinematic HDR experiences, then you’ve come to the wrong place. Unfortunately, the Blaupunkt UGC5500S is not a machine built for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on movie screens speaks for itself. It’s simply too little to even consider any real HDR effect. To be honest, everything displayed in this format can confidently be seen as a somewhat “enhanced” SDR mode. We expected this, as practically every device in this price range falls short in this area, but we feel it’s our duty to warn you. Manufacturers love to brag about HDR compatibility on the boxes, but in reality, this format simply doesn’t exist here – it lacks the “fuel” in the form of brightness.

The situation is further complicated for Blaupunkt, as we’re dealing with a panel that has very basic coverage of the DCI-P3 colour gamut, reaching only about 80%. You won’t find any advanced coatings to expand these capabilities (like quantum dots), which means scenes that are supposed to burst with richly saturated colours appear simply underwhelming on this screen. Therefore, we have a particular piece of advice for you: don’t force HDR mode on this model. If you have the option in the streaming app settings – just turn it off. By sticking to the classic SDR mode, you’ll be sure that the TV won’t try to “enhance” something that it can’t handle hardware-wise.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". While it was the best of the predefined modes, it still had significant discrepancies between what the filmmaker wanted to convey and what the tested television displayed. In both SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vibrant mode, with a blue tint reminiscent of what you see in retail displays. Moving directly to the SDR materials and what affects contrast, namely gamma, we see it being severely reduced. This leads to cutting off already minimal contrast resources and brightening the entire image. In the EOTF curve, responsible for the increase in brightness pace in HDR materials, we instead see a strong drop below the reference line, which, given the limited light output of the television, significantly impacted the perception of those contents, which were even more dimmed. We won’t separate the quality assessments of the colours themselves since, in both cases, they achieved astronomical deltaE values, being simply completely different from what they should be.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, to put it simply, twofold. We must once again clearly separate what we see in the standard SDR format from what happens when HDR is switched on, as they are two completely different worlds. Let's start with the better side of the coin. If you're planning to watch traditional TV, YouTube, or older films on this television, you can count on really well-tuned colours. In our test sample, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being too rosy, we noticed some drawbacks. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest areas. Additionally, there is quite a strong, at times overly aggressive, red saturation, which resulted in visible errors in reproducing certain shades. Despite this, overall, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst rendition. The excess blue in the white balance is so significant that it’s glaring, ruining any realism in the scene. Furthermore, the television interprets brightness very loosely, which, upon analysing the EOTF curve, clearly showed that for most of the time, colours simply appear washed out and lacking depth. This is also perfectly evident in the colour errors that become apparent in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which seems to be forcefully added without proper refinement.

Luckily, Philips implements advanced image correction tools in all of its TVs. SDR content has benefited the most here, and the huge deltaE errors have been significantly corrected, with both white balance and gamma being substantially reworked. While we can't say it's reference-quality image, it's definitely better, and you can watch a movie or series without causing a headache, especially for your eyes. Naturally, HDR materials, due to the very low luminance of the TV, could not be corrected to the same high degree as those with a standard colour palette, but we managed to roughly straighten out the EOTF curve and the white balance. Unfortunately, that was all we could squeeze out of our unit, although it's worth noting that each unit is different and has entirely different errors, whether minor or major.

It may sound like a joke – pulling out professional measuring equipment for a TV that costs around a thousand złoty / 250 dollars, but we wouldn’t be ourselves if we didn’t check it. The question is: does such cheap gear give us any leeway in terms of calibration? To your surprise, the answer is: yes, absolutely. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to effectively work on the picture. These aren't just empty sliders; these are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the issue with the incorrect dimming of the brightest parts of the image. After calibration, the picture in standard format became significantly more balanced and simply correct. When it comes to HDR, the situation was more complicated again. While we managed to “tame” that aggressive blue tint in the white balance, it was clear that we were fighting a bit of a losing battle. Even after changing the settings, the TV still tried to interfere with the picture in its own way, as if the electronics knew better than we did how the scene should look. To top it off, there's the hardware barrier that no slider can overcome – colours in HDR still remain undersaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vivid colours. To summarise this point: if any of you ask whether it’s possible to calibrate a TV for “a grand”, we respond with complete conviction: it is possible.

We will return once again to the issue of tonal transitions, but in the context of overall image quality improvement. As we can observe in the photo on the left, the gradation enhancement feature works brilliantly. Furthermore, it offers several settings, and each of them, even the lowest, provides a beneficial effect, and, what’s more, does not soften the film grain effect. We will repeat once again that this feature is the biggest advantage of the tested television.

Secondly, we will look at image scaling. Here, the tested television performed worse. We can notice, above all, the strongly jagged fine details and the characteristic white glow around figures. We must not forget about the significant artificial sharpening of the image.

If you're hoping that the processor in this model will magically "fix" the poor quality signal from your cable TV or old movies from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no mention of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions to reduce unwanted tonal transitions. If the material being viewed shows what is known as banding (ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display them in all their glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly zooms in on the frame, causing us to lose details that are at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

This paragraph, unlike the others, will be extremely short. The reason for this situation is the lack of implementation of even the most basic motion smoothing function, which was to be expected given the price of the device. We also note that we are dealing with a VA panel, whose sharpness will not be the best under the sun. This type of panel is mainly associated with high contrast, which goes hand in hand with a relatively slow response time, as we can clearly read from the panel analysis results. As you can see, from the images captured in quick motion, the picture is blurred, typical for this type of panel. Although it may not be the ideal option, it can conditionally be used for watching sports, although one must keep in mind the less than optimal sharpness in motion. It's worth mentioning that movies will exhibit stuttering, as the television does not have any, not even the simplest, motion smoother.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won’t find any digital motion smoothers in the menu. The manufacturer hasn’t given us any room for manoeuvre – nothing can be smoothed out or the image adjusted to our personal preferences. The picture is always "raw" and we receive it exactly as it is transmitted by the source. For fans of cinematic "jumping" images, this might be good, but the rest simply has to get used to the lack of any motion enhancement.

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic refresh rate adjustment, the image is actually quite smooth for this price range and does not 'tear' the image.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for settings adjustments 'on the fly'. This means we won’t have to exit the game to make any changes to the image. Importantly, it hasn’t been stripped of options known from higher models. We can find features such as shadow enhancement for better visibility in shadows and a colour filter for players with visual impairments.

When it comes to gaming on the Blaupunkt, we weren’t expecting miracles and indeed – the list of features isn’t very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first advantage is that the TV quite smoothly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low latency mode. This is convenient because you don’t have to fiddle with settings every time to ensure input lag doesn’t spoil the fun. The second point is a real curiosity that surprised us. Despite it being a 60 Hz panel, the Blaupunkt can display a 120 Hz image at Full HD resolution. Sure, we lose 4K details, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an affordable device. Other than these two points, you won’t find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.