Philips PUS7009 (IPS) vs TCL C75B

In terms of HDR quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits doesn't allow for enjoyment of HDR effects, and the image resembles more of a standard SDR. There’s no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is definitely insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unimpressive image. There are no aspects to commend this model in the context of HDR.

During our brightness test, the TCL C75B "spat out" around 380 nits of brightness. We recorded similar results while watching most of the films we tested. These can be considered average – the TV performs decently in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, such results are better than those of budget models, which can achieve nearly half the brightness values. However, for HDR enthusiasts seeking stronger lighting effects and greater realism, the C75B may prove insufficient. On the plus side, it's worth mentioning the coverage of the DCI-P3 colour gamut at 95%. This is a very good result that easily suffices to enjoy a wide range of colours in content available on popular streaming platforms. Vivid and rich colours are definitely a strong point of this model.

The television was tested in movie mode, which – despite its name – does not provide correct image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, making the image cooler and the colours lose their natural warmth. The gamma brightness characteristics and EOTF curve confirm that the television has issues maintaining appropriate brightness – it boosts it significantly, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where everything looks as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not promote quality – colour checker attempts indicate significant colour variations, making it difficult to achieve faithful image reproduction.

TCL C75B offers various picture modes, but in our opinion, the best choice is the “Film” mode. Although its settings are quite decent, the TV struggles with certain colour reproduction issues. In tests, we noticed that the image had a noticeably pinkish hue compared to what could be considered correct. This effect was particularly evident in skin tones, which appeared unnaturally flushed. The main culprit of this phenomenon turned out to be the white balance, characterised by an excess of blue and red in both HD and 4K HDR materials.

An additional problem was the way brightness was reproduced. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, disappearing into complete black (e.g., the bottom part of the screen in the comparison image - the area around the actress's ear). The situation was similar on the EOTF curve, which was below the correct value, suggesting that a similar issue may be encountered in 4K HDR content.

Thanks to our experience and the appropriate tools, we decided to take matters into our own hands and check how much could be extracted from this model after professional calibration. The details are described in the next section.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the earlier impression of a rather cool picture. The calibration has brought noticeable benefits in terms of tonality – the shadows and midtones are now more realistic, and the whole seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristic remains problematic, despite our efforts, and due to poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

After calibration, TCL C75B has clearly improved when it comes to colour reproduction. Although the TV doesn't offer too many options for adjusting the white balance, we managed to improve its settings quite a bit. As a result, the image is no longer overly pink, and the colours now look much more natural and harmonious.

The gamma jump that was previously an issue hasn't completely disappeared, but we were able to significantly reduce it. This has made details in dark scenes more visible – both in HD and 4K HDR content.

Unfortunately, the lack of local dimming is still noticeable. The 'blooming black' effect remains, but that's a limitation of the display itself. Still, the colours post-calibration look significantly better, and the image is much more pleasant to watch.

If we talk about tonal transitions in low-quality material, the feature called "Distortion Reduction" (set to "minimum") effectively improves the gradation, eliminating undesirable tonal transitions. However, this setting on Philips TVs is quite aggressive – while it doesn't blur grain or high-quality material, it may introduce unwanted effects and blur elements that should remain sharp with poorer signals.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped edges, meaning no overscan, which allows for displaying the full frame without loss. The image is noticeably improved, making characters and backgrounds, such as the model or branches in the background, look fairly detailed and natural, even with lower quality signals. Although the scaling is not perfect, as it can remove desired details in the distance, the results are good enough to satisfy most users.

TCL C75B has a feature for smoothing tonal transitions, but unfortunately, we cannot praise it. Regardless of the selected level – low or high – tonal transitions in older materials remained visible, as if the feature wasn’t working at all. It’s hard to say anything positive about it, as in practice it seems completely useless.

Image scaling is better. The TV handles it quite decently, although on thinner elements, like branches in the background, you can see slight jaggedness. However, this is not something that significantly hinders everyday viewing.

Unfortunately, a bigger problem turned out to be overscan, or cropping of the image edges. In our tests, it happened that news ticker or other elements close to the edge of the screen were cut off. This is definitely something to pay attention to, especially if we use the TV for watching news programs or content with text on the screen.

Philips PUS7009 does not have any motion smoothing features in films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the viewing comfort of dynamic scenes.

TCL C75B definitely has something to offer gamers. The television is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really impressive results, especially for a model from the budget range.

On top of that, there are features for improving smoothness and reducing motion blur in films. The "Motion" option allows for precise adjustment of the effect on a 10-point scale, providing significant personalisation possibilities – everyone can set the smoothness to their liking.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite using HDMI 2.0, the TV offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the TV to low latency mode, allowing for faster responses while gaming, while VRR dynamically adjusts the refresh rate to reduce screen tearing. The Game Bar is a tool that provides quick access to game settings and real-time parameter monitoring - although we believe it looks the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the TV's ability to deliver smooth and fully detailed experiences during fast-paced gameplay.

TCL C75B is undoubtedly a television designed with gamers in mind. It has almost everything needed for even the most demanding console users. With the implementation of full bandwidth HDMI 2.1, the TV supports features like ALLM (automatic low latency mode) and VRR (variable refresh rate) – operating within the full capabilities of the TV, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, which allows for even better detailing in HDR-optimised games. C75B is also equipped with a very convenient interface for gamers in the form of Game Bar, where you can check all key parameters such as refresh rate, input lag, or picture settings – all just a click away.

In one sentence: C75B is a great choice for gamers, offering a wide range of features that fully enable enjoyment of the capabilities of modern consoles and games.