Philips PUS7009 (IPS) vs Sharp GP7

In terms of HDR quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits doesn't allow for enjoyment of HDR effects, and the image resembles more of a standard SDR. There’s no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is definitely insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unimpressive image. There are no aspects to commend this model in the context of HDR.

In terms of HDR, Sharp GP7 can surprise us pleasantly. The maximum brightness of around 500 nits is the threshold at which the real advantages of high dynamic range begin to be visible. During our tests, we achieved stable values between 430 and 500 nits, which translated to a clearer distinction of elements in both bright and slightly darker scenes. Additionally, it has a DCI-P3 colour gamut coverage of about 95%, allowing for vibrant, visually pleasing colours. Of course, it isn't top-tier, but for this price range – a big plus.

The television was tested in movie mode, which – despite its name – does not provide correct image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, making the image cooler and the colours lose their natural warmth. The gamma brightness characteristics and EOTF curve confirm that the television has issues maintaining appropriate brightness – it boosts it significantly, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where everything looks as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not promote quality – colour checker attempts indicate significant colour variations, making it difficult to achieve faithful image reproduction.

Out of the box, in movie mode, GP7 doesn't fare badly at all. In HD materials, we noticed slight disturbances in white balance - drops in red and blue that made the image take on a somewhat greenish hue. This is noticeable, for instance, on the faces of characters, which become less lifelike. The gamma is slightly brighter in places, resulting in less deep blacks. In 4K HDR content, a cooler, bluish tone also emerges, making the colours appear less natural. On the other hand, looking at it from a "straight out of the box" perspective, these settings aren't bad - a few minor adjustments will suffice, and with the help of special tools, we will try to improve them.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the earlier impression of a rather cool picture. The calibration has brought noticeable benefits in terms of tonality – the shadows and midtones are now more realistic, and the whole seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristic remains problematic, despite our efforts, and due to poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

Calibration really makes a difference in Sharp GP7. After making adjustments, we achieved a better white balance in HD content, and the colours started to look much more natural, with minimal deviations and no clear dominance of individual hues. In 4K HDR, the change isn't as spectacular, but it's still noticeable. The gamma has been brought to a more neutral level, although a slight boost in the brightest details on the screen is still evident. The inability to control dynamic tone mapping limits our manoeuvrability, but nonetheless, this is a significant step forward compared to the factory settings.

If we talk about tonal transitions in low-quality material, the feature called "Distortion Reduction" (set to "minimum") effectively improves the gradation, eliminating undesirable tonal transitions. However, this setting on Philips TVs is quite aggressive – while it doesn't blur grain or high-quality material, it may introduce unwanted effects and blur elements that should remain sharp with poorer signals.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped edges, meaning no overscan, which allows for displaying the full frame without loss. The image is noticeably improved, making characters and backgrounds, such as the model or branches in the background, look fairly detailed and natural, even with lower quality signals. Although the scaling is not perfect, as it can remove desired details in the distance, the results are good enough to satisfy most users.

The TV can scale lower quality content quite well. Our test patterns were well reproduced, and although there was minimal banding with fine, delicate shapes (such as thin branches), it still looked satisfactory. Additionally, Sharp GP7 offers a “10-bit colour reproduction” feature to smooth tonal transitions in poor quality materials. It is useful, but at the cost of some details, so we recommend turning it on only when we're really watching something of poor quality.

Philips PUS7009 does not have any motion smoothing features in films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the viewing comfort of dynamic scenes.

With a 60 Hz panel and average response time, it's hard to expect miraculous smoothness. In dynamic tests, like the one with the “little green man”, it’s clear that the picture can blur and occasionally lose sharpness. For watching movies and series, this is acceptable, especially since you can use the motion smoother with three levels of adjustment. However, if we care about ultra-smooth sports broadcasts or super-responsive gameplay, we might feel a bit dissatisfied.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite using HDMI 2.0, the TV offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the TV to low latency mode, allowing for faster responses while gaming, while VRR dynamically adjusts the refresh rate to reduce screen tearing. The Game Bar is a tool that provides quick access to game settings and real-time parameter monitoring - although we believe it looks the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the TV's ability to deliver smooth and fully detailed experiences during fast-paced gameplay.

Let's not kid ourselves – GP7 Sharp is not a television for the most demanding console gamers. Yes, we have ALLM, which automatically switches the TV to low latency mode, but it lacks VRR or G-Sync. We also won't find any advanced menu to help adjust settings during gameplay. Dolby Vision in games? It's there, but with such a large input lag that it's hard to talk about comfort. If we play occasionally and don't aim for the highest standards, it can be managed, but tech enthusiasts will face disappointment.