Philips PUS7009 (IPS) vs Philips PUS8209

In terms of HDR quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits doesn't allow for enjoyment of HDR effects, and the image resembles more of a standard SDR. There’s no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is definitely insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unimpressive image. There are no aspects to commend this model in the context of HDR.

Unfortunately, this is where the problems start. A maximum brightness of 280 nits is definitely too low to experience the true effect of HDR. In practice, the image resembles standard SDR more, so it's hard to talk about deeper visual experiences. On the plus side, the colour gamut coverage is 91.4% DCI-P3, which will be sufficient for most films. It's also worth noting that the image is stable and there are no issues with sudden brightness or colour changes. Overall, HDR on this television is more of a formality than an actual added value. If we're looking for genuine HDR emotions, this model may not meet expectations.

The television was tested in movie mode, which – despite its name – does not provide correct image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, making the image cooler and the colours lose their natural warmth. The gamma brightness characteristics and EOTF curve confirm that the television has issues maintaining appropriate brightness – it boosts it significantly, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where everything looks as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not promote quality – colour checker attempts indicate significant colour variations, making it difficult to achieve faithful image reproduction.

Philips PUS8209 offers many picture modes, but the best of them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its distinct problems. For HD content, the white balance is characterised by a strong dominance of red, causing the image to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in mid-tones, has serious issues at the beginning and end of the graph. Drops in shadows result in a loss of detail in dark areas, and spikes in bright areas make some elements look unnatural.

For high-quality content in 4K HDR, the situation reverses. In this case, blue dominates, leading to an artificial image boost effect, reminiscent of unnatural retail settings. Such an image looks unappealing and does not align with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference graph, causing the image to appear too dark, stripping depth and detail from HDR content.

Against this backdrop, the errors in the Color Checker test and deviations in colour palette reproduction are exceptionally large, which further negatively affects the overall image quality. The Filmmaker mode, while the best among those available, requires substantial corrections to truly convey the full vision of the director.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the earlier impression of a rather cool picture. The calibration has brought noticeable benefits in terms of tonality – the shadows and midtones are now more realistic, and the whole seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristic remains problematic, despite our efforts, and due to poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

After calibration, the white balance for HD and 4K content has significantly improved. While we haven't achieved a perfectly flat characteristic, the result is definitely better than before. The image on the television no longer appears either artificially warm or overly cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted – the most significant issues at the beginning and end of the graph have been mitigated. The EOTF curve, which is responsible for brightness in 4K HDR materials, has been stabilised, eliminating problems with excessive dimming of the image. In the colour palette test, some imperfections can still be seen due to the average coverage of the wide colour gamut, which is a limitation of the hardware itself. Nevertheless, the final result is clearly better than pre-calibration – the image looks more natural and approaches the expectations for Filmmaker mode.

If we talk about tonal transitions in low-quality material, the feature called "Distortion Reduction" (set to "minimum") effectively improves the gradation, eliminating undesirable tonal transitions. However, this setting on Philips TVs is quite aggressive – while it doesn't blur grain or high-quality material, it may introduce unwanted effects and blur elements that should remain sharp with poorer signals.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped edges, meaning no overscan, which allows for displaying the full frame without loss. The image is noticeably improved, making characters and backgrounds, such as the model or branches in the background, look fairly detailed and natural, even with lower quality signals. Although the scaling is not perfect, as it can remove desired details in the distance, the results are good enough to satisfy most users.

The television offers a “Distortion Reduction” feature that effectively improves the gradation of tonal transitions, particularly when set to the minimum level. Unfortunately, this comes at a cost – the feature also smooths out details like material textures. On the plus side, it’s worth noting that the operation of this option does not negatively affect the film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, issues with aliasing of certain elements, such as branches or small details, can sometimes be noticed, which may decrease the quality of the reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

Philips PUS7009 does not have any motion smoothing features in films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the viewing comfort of dynamic scenes.

The 60 Hz panel in the Philips PUS8209 is mainly suited for watching movies, but here you can also feel a certain shortcoming. The television does not offer any motion smoothing that would allow you to adjust the fluidity of the picture to individual preferences, which for some users may be disappointing.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite using HDMI 2.0, the TV offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the TV to low latency mode, allowing for faster responses while gaming, while VRR dynamically adjusts the refresh rate to reduce screen tearing. The Game Bar is a tool that provides quick access to game settings and real-time parameter monitoring - although we believe it looks the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the TV's ability to deliver smooth and fully detailed experiences during fast-paced gameplay.

Philips PUS8209 offers basic features useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and Game Bar, which makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the TV will not meet the expectations of more demanding gamers who are looking for higher fluidity and precision of image. Additionally, this model does not support any HDR mode dedicated to gaming, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.