Philips PUS7000 vs Samsung QN80H

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000‑nit mark, which on paper already promises a solid HDR effect. In practice the screen really shows its stuff, although it can't always fully spread its wings (or its backlight 🤔). The best impression comes from bright, wide shots. Sunlit landscapes or heavily lit scenes look really good on it. Brightness then sits around 700 nits, which delivers a noticeable step up compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim those aggressively to protect black depth at all costs. On one hand you get better contrast, on the other... you lose dynamics and the sparkle of fine HDR detail. The TV therefore has plenty of potential, but the local‑dimming algorithm can be too restrictive.

Colour‑gamut coverage

Colour-wise it’s also good. The QN80H uses quantum‑dot technology, and in our measurements it covered 93% of the DCI‑P3 colour space and about 70% of BT.2020. Those results won't drop anyone's jaw today, but in real‑world use they’re more than enough to deliver a vivid and natural picture for most films and series. Colours are suitably saturated and, after proper tuning, they don't look artificial or overly aggressive.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

The QN80H’s factory settings performed really well, especially compared with most TVs that come through our tests. Of course we took measurements in Filmmaker Mode, and that’s the mode we recommend switching on right after the initial setup. For SDR content our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to spot without test equipment. The only weaker point was the gamma. In brighter parts of the picture the TV brightened them a little too much, so the image sometimes lost some depth. Even so, we wish most TVs looked this good straight out of the box.

It was a bit worse in HDR. The white balance was still set correctly, so the issue wasn’t colour but the way the QN80H managed image brightness. You could see that straight away on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, very small highlights were often dimmed too much at the same time. As a result some fine details simply disappeared. The factory Filmmaker mode in HDR isn’t bad, but it’s definitely not as well tuned as it is in SDR.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we were able to rein in how the QN80H handled brightness; it had been making most scenes too bright. After calibration the picture is calmer, more natural and much closer to a faithful reproduction.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

The digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we've already seen in previous Samsung models and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without making it feel like the TV is trying to forcibly enhance the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, especially in low-bitrate streaming. However, you should remember it doesn't work without side effects. It can remove some film grain and slightly smooth the picture. So with a good-quality source we'd leave this feature turned off. If, however, banding and uneven tonal transitions bother you more than the loss of some grain, "Noise Reduction" can be a really useful addition.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes the image at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach up to 240 Hz. That's new for Samsung TVs and a handy extra for people who want to use the TV for PC gaming. We were more interested, though, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. It does very well. The panel doesn't suffer much from the smearing typical of VA panels; faint trails behind moving objects are mostly visible on dark backgrounds. That's not something that would interfere with normal sports watching or gaming. The TV also has a motion smoothing system that Samsung calls "Picture Clarity". You can set judder reduction and blur reduction separately, so it's easy to tune it for films, sport or your own preferences.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.

The Samsung QN80H is a TV that performs very strongly when it comes to gamer-focused features. The biggest new feature for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still investing heavily in the gaming side of its TVs. The list of advantages doesn't end there. The QN80H has four full HDMI 2.1 ports, which at this price point still isn't standard. So you can connect multiple consoles, a PC or a soundbar at once and not worry about which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which could matter especially for Xbox Series X owners. However, this isn't a flaw that rules the QN80H out as a gaming TV. Samsung does have a feature that most manufacturers still lack, namely its proprietary motion smoothing, Game Motion Plus. This motion smoother also works in game mode, improving the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby's codec, especially in more demanding games that don't offer a 60 fps mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped gaming TVs in its class.