Philips PUS7000 vs Haier M95E

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

If there is one category where the Haier M95E absolutely shines, it is the HDR effect, powered by the raw power of the backlight. This television cannot be denied its reputation as a truly bright device. In both most film scenes and during our synthetic measurements, the panel easily reached, and often exceeded, the threshold of 1200-1500 nits. This directly translates to the viewing experience – the image has punch and truly allows one to feel the magic of materials recorded in this format. However, one must be aware of a certain compromise. When particularly demanding shots filled with small but intense bright points appear on the screen, the M95E, while not losing its resonance and not dimming, pays a different price for it. A very strong and noticeably distracting halo effect is generated around these bright elements. It is evident that the algorithms controlling dimming have been programmed to prioritise brightness and the visibility of the smallest details, even if this comes at the cost of perfect black levels. We are not entirely convinced that this is the healthiest approach; nonetheless, it must be admitted that the general capabilities of the M95E in this regard are indeed substantial. A huge positive is that we are dealing with a Mini LED QLED construction. The use of a quantum dot layer brings measurable benefits in the form of wide coverage of the colour palette, which in our tests reached nearly 96% of the DCI-P3 space. This guarantees that the television has full predispositions for displaying vibrant and appropriately saturated colours.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

Each TV is evaluated primarily based on its default cinematic mode – in this case, "Movie" – which theoretically should be the "best" and most accurate straight out of the box. Unfortunately, with the Haier M95E, the word "best" is absolutely not synonymous with the word "good." Even during SDR viewing, the picture revealed evident issues: white balance skewed too far towards red, and excessive, unnatural colour saturation led to noticeable colour deviations. Worse still, the M95E also struggles with brightness management (gamma curve), excessively darkening the entire scene. Such behaviour is hard to commend, as it directly leads to the merging of details in shadows, which irretrievably disappear into a black void.

However, the real disaster arrived when switching to HDR content, still remaining in "Movie" mode. It's hard to guess who came up with such a fantastic idea – or perhaps it was simply a complete oversight by Haier's engineers during this stage – but instead of cinematic accuracy, the image started to resemble a vivid "Dynamic" mode. The white balance exposed significant issues with blue color, which in turn resulted in unnatural sharpness and artificial over-brightening of the entire scene. As if that wasn't enough, the EOTF curve's characteristics mercilessly revealed that the TV also had fundamental issues with managing the local dimming system in this setting. We haven’t calibrated many Haier TVs in our career, but we know for sure already that the M95E definitely needs it.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

The calibration process left us with extremely mixed feelings. On one hand, we noted considerable success in the area of colour. By using the options available in the menu, we managed to tame the white balance and bring it down to an acceptable level. As a result, SDR content finally freed itself from the irritating red dominance, and the HDR image stopped resembling the vivid, retail demonstration mode. The entire colour palette and its saturation were also clearly corrected – maybe not perfectly, but to the extent that the software allowed, and the difference was visible to the naked eye.

And on this, unfortunately, our list of corrections pretty much ends, as M95E simply didn't allow for any more. As we signalled earlier, most settings related to the brightness of the image do not respond to our commands at all. This means that we were not able to control its fundamental characteristics in any way – neither the gamma curve nor the EOTF. In practice, the television still tends to darken details in SDR content, which was confirmed by the inflated gamma, merging details in the shadows. Meanwhile, the EOTF curve in HDR mode still mercilessly exposed all those previously mentioned problems with chaotic local dimming management. And although the calibration process itself achieved a lot, removing most of the colour issues, in the end, we had to capitulate.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

No worries, but what happens to those colour transitions when lower quality material with compression artifacts comes on screen? Unfortunately, we have some bad news for you. Even though in the menu we can find an option responsible for smoothing tonal transitions in older content, we definitely DO NOT RECOMMEND using it. Its activation causes an avalanche of additional, nasty artifacts, noticeably blurring the entire image, and ironically – it often doesn’t even remove those unwanted “jaggies” it was meant to tackle. This feature might as well not exist at all.

We can write many more warm words about the overall upscaling, which is the process of raising lower resolutions to the native 4K matrix. The image after upscaling looks really decent – it’s neither overly jagged nor artificially smoothed. In this particular area, the M95E really does the job.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

In terms of motion fluidity and blurring, our feelings are quite mixed because the M95E is a paradox television. Let's start with absolute admiration: the heart of the device is its 144Hz panel, but what really impresses is its performance with 120Hz content, which is crucial for sports and console gaming. We must state with complete certainty that Haier has equipped it with one of the best VA panels currently available on the market when it comes to minimising blurring. It is rare to encounter an LCD panel that offers such clear, sharp, and ghosting-free motion. In this regard, the M95E is simply phenomenal.

And that is why the unpleasant surprise waiting for us on the software side is so painful. It turns out that this fantastic hardware potential is completely underutilised because the TV virtually offers no functioning options for improving fluidity. The smoothing systems that should help with lower frame rate content can indeed be found in the menu, but they essentially do not respond to our settings. The conclusion is brutally simple: if you intend to watch high fluidity materials, you must be sure that the source is broadcasting them in native 120. In every other case, you will have to come to terms with a rather harsh, stuttering image, as the M95E will not help smooth it out in any way.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.

When it comes to features for gamers, the Haier M95E offers some strong arguments. First and foremost, it is fully prepared for the new generation of consoles and powerful gaming PCs. It comes equipped with two full-fledged HDMI 2.1 ports, which effortlessly handle 4K signals at 120Hz and even allow gaming at 144Hz. This is the foundation that guarantees us full utilisation of our available hardware. Furthermore, the key technologies work flawlessly here. The TV accurately detects the console and automatically switches to low-latency mode (ALLM), so we don’t have to fiddle with the settings. The frame syncing (VRR) also works efficiently, eliminating annoying tearing when the game’s smoothness slightly drops. Considering the exceptionally low motion blur of the panel, which we've already mentioned, the M95E creates a truly comfortable and responsive gaming environment. Of course, it's not a perfect package. A dedicated "Game Bar", which is a handy menu for gamers, would be useful, but that's really just a nice extra. A more serious omission is the lack of support for the HGiG standard, which impedes the perfect HDR configuration on consoles and can lead to overexposure. Despite these shortcomings, the core "gaming package" that the M95E offers is really solid and fully functional.