Philips PQS9011 / PQS9001 (The One 2026) vs Philips OLED811

The Philips PQS9000 is a moderately bright TV — in our HDR scenes it reached roughly 450 to just over 500 nits. That’s enough to notice a difference compared with SDR. Sun reflections, lamps or flares have a bit more punch than on basic TVs, whose brightness often tops out around 300 nits. It’s not, however, a level where bright elements look especially striking. The biggest limitation remains contrast. Without local dimming, brightening a bright object also lifts the black level around it. So there’s no clear separation between strong highlights and a dark background, and it’s that kind of pairing that really shows what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer markets this model as QLED, it actually uses a PFS phosphor instead of quantum dots. The solution itself doesn’t prevent good results. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice this means the vast majority of colours used in HDR films and series will have appropriate saturation. Lush greens or intense reds aren’t a problem and add appeal to the picture. Limitations are easier to notice in some games and rarer content that use the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. At its price point the PQS9000 has nothing to be ashamed of.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured about 1500 nits, which is a very good result for an OLED TV. You can see that clearly in films and series. Flashes of light have the right punch, especially when they appear on a dark background. In those scenes the OLED811 can deliver really impressive HDR. Of course this doesn't mean you'll see that level of brightness in every shot. When the screen is filled with a large area of white or a wide explosion, brightness falls to around 600 nits. That's still a good result, but such scenes don't have the same impact as small bright elements on a dark background. That's a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips also performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. So you get rich reds and lush greens, and while watching it's hard to fault it in that regard. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. There's also the issue of the white subpixel that the WOLED panel uses to help boost brightness. With very bright colours you can see a certain "washout": the colour is bright but loses some of its intensity. It's in exactly these situations that Samsung Display's QD-OLED panels have the advantage. In most films and series, though, this won't be something that immediately jumps out at you.

The factory picture settings for Movie mode on the PQS9000 unfortunately need tweaking. In SDR the biggest problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, in places even slightly pink. Gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the image look flatter than it should.

In HDR the white balance itself performs significantly better. Apart from minor deviations the components sit close together, so there isn’t the same obvious tint as in SDR. The EOTF curve, however, shows a slight brightening of parts of the image, and the biggest issue appears when measuring the wide colour gamut. Many shades deviate substantially from the target, with errors reaching ΔE 8–9. The good gamut coverage we praised earlier therefore doesn’t mean the TV hits specific colours accurately. It can display a wide range of colours, but out of the box it doesn’t use that range very precisely.

The film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain minor in both SDR and HDR, so you can comfortably sit down to watch without adjusting the settings first. There are no large inaccuracies that would immediately distract from the film.

It’s not quite perfect, though. The white balance shows a slight lack of red relative to green, so whites and greys can have a faint greenish tint. It’s not a strong colour cast, but measurements clearly show it. There are also small luminance deviations in SDR: some parts of the image are slightly brightened, and the deepest tones aren’t always reproduced evenly. In HDR the TV stays much closer to the reference, although it occasionally lifts detail from the shadows. These are generally things that can be refined. The factory film mode provides a good starting point, and calibration will reveal how much more you can get out of it.

Calibration brought a big improvement, especially with SDR content. We managed to even out the white balance and remove the earlier colour cast, and the Color Checker measurements now look very good. Colours are much closer to what they should be on screen, so with regular TV or SDR movies we can be happy with the result. Unfortunately HDR spoils that a bit. On the one hand it's limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there are colour errors we couldn't correct because the CMS settings, i.e. colour management, were greyed out and inactive. That loses Philips points with us. The white balance can be fine-tuned, but without access to wide gamut controls you can't as effectively sort out colours in HDR. It's a shame, because the SDR results show the potential is there, but we weren't allowed to fully make use of it everywhere.

After calibration the Philips OLED811 delivers an image very close to the reference. We managed to even out the white balance and remove the slight colour cast visible in the factory settings. ColorChecker errors for SDR and HDR fell to around 1 to 2, with many samples even below 1. That's a level at which differences from the reference are hard to spot with the naked eye. We also improved the gamma, with only a slight lift remaining in the brightest whites. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small details, such as stars or subtitles. That gives the picture a bit of extra brightness that shouldn't be there, but otherwise it's hard to find fault. It was already good out of the box, and calibration allowed us to iron out most of the remaining issues.

Digital image processing on the Philips PQS9000 performs well, although we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality sources, but it works rather unevenly. It can improve one part of the picture, only to, moments later and still within the same scene, lose its way and show banding between shades again. On the plus side, it doesn't strip away film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best and that's the one we recommend.

The upscaling to 4K itself is adequate, though the image is very soft. Edges are heavily smoothed, which may leave some viewers wanting more clarity. In that case, it's worth slightly increasing the sharpness in the TV menu, as this will help emphasise edges more. Don't overdo the sharpness slider, though, or you'll get artificial halos instead of an improvement.

The OLED811 handles processing lower-quality material reasonably well, though it's far from perfect. The "Banding reduction" function helps smooth tonal transitions and on the low setting gives a pretty good effect. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artefacts. It's a sensible setting for everyday viewing. Still, there's a bit of a letdown, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' hands, deal with the effects of heavy compression more effectively even at similarly low settings. A lot therefore depends on how a given manufacturer uses its capabilities.

We have a few more comments about the upscaling to 4K. There's plenty of detail, but overall the image looks rather soft. Edges are heavily smoothed, so the picture lacks some sharpness and clarity. You can partially correct this with the sharpness slider in the menu, though that will be extra edge enhancement rather than recovering detail. On the plus side, there's no overscan, and even with an SD signal the TV doesn't crop the edges of the picture.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just about the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's particularly pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and in this respect Philips has pleasantly surprised us.

The "Motion Styles" feature is used to adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the material you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and see which level of smoothing suits you best.

In terms of motion handling the OLED811 performs superbly. At 120 Hz, which is useful for console gaming and watching sport, the image remains clear and moving objects don't leave noticeable trails. The OLED's fast pixel response helps here. You can see it clearly in the UFO test, even on a dark background. There are also controls for motion smoothing. In movies you can adjust the strength of smoothing to your taste, from preserving a cinematic feel to much smoother motion. A separate blur-reduction control is useful for fast-paced content like live sports broadcasts.

Features for gamers

In terms of gaming features the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to choose which one gets the full capabilities. Consoles can use 120 Hz at Full HD, 1440p and 4K, and a PC can also run 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range runs from 48 to 240 Hz, with the upper limit applying to Full HD mode.

It also includes ALLM, so the TV switches itself into game mode, and a properly working HGiG, which is handy when setting HDR on the console. There's a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy because of very high input lag. Apart from that caveat, the feature set is really solid.

The OLED811 has almost everything you’d expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach up to 165 Hz. It also offers VRR to help avoid screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don’t have to go into the settings every time you start your console.

Another plus is the properly working HGiG, which ensures that once HDR is set on the console the TV doesn’t apply its own changes to image brightness. The Game Bar is also available, letting you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there’s a significant catch here, which you’ll read about below.