Philips PML9009 / 9019 / 9059 vs Sony X75WL

Philips PML9009 doesn't really operate at the highest values in HDR materials. Most effects with brightness around 550 nits won't leave us thrilled with the lighting effects, although they are quite stable, which is a plus, and a considerable difference can be felt between SDR materials. It's worth noting that we can achieve a good result only in one scenario, that is in the film "Gemini," where the flashlight as the sole light source can really shine. Why in this scene? The answer is quite simple. The scene itself doesn't have a large amount of black, and the flashlight isn't as large an object as the sun in the first and last scenes. Overall, the brightness measurement results in HDR materials aren't a solid basis for recommending this television for viewing productions that use a wide color gamut. However, it's worth mentioning that this model can cover it in a not too bad 93% degree in the case of the DCI-P3 palette.

The luminance chart for the X75WL Sony television showed a maximum value of 350 nits, which unfortunately is not an impressive result. The television does not surprise with its brightness, and all the HDR scenes we tested lacked depth and the appropriate lighting effect that should accompany HDR content. Additionally, the tragic coverage of the DCI-P3 colour palette makes it difficult for the television to reproduce rich colours, which significantly affects the overall viewing experience of HDR content. The lack of adequate brightness and poor colour coverage means that HDR effects are very limited in this model.

The best factory mode used during our tests was "Filmmaker". Here, we will examine both SDR and HDR content. The key differentiator is primarily the EOTF curve in the wide colour gamut materials and gamma in those recorded "the old way". Starting with SDR films and series and the most basic thing we can observe, which is white balance, we see a significant red colour dominance. This led to a yellow tint across the whole image, causing unnaturally looking faces and yellowed whites. This issue is also clearly visible on the "ColourChecker" palette, where all colours have shifted towards their warmer counterparts. Looking at an even more significant graph, the gamma responsible for the contrast of the image, we see considerable errors beginning right from the start. From the left, the value we measured, indicated by a combined ellipsis, clearly spiked upwards, causing complete merging of details in the darkest scenes. This state of affairs persisted up to 10% brightness on the screen, after which it dove below the reference orange line, leading to a deterioration in contrast, which, as we know, Philips PML9009 is already lacking. In HDR materials, white balance issues were very similar to those in SDR content. The discrepancy appears when checking the EOTF curve, which governs the rate of brightness increase and severely limited it, resulting in an unnaturally dark image. As for the colours themselves, there were more reasons for concern here, as the television's low luminance caused a huge disparity between the actual state and the correct one, which is perfectly visible on the error graph, often exceeding the scale.

Colour reproduction tests for the model Sony X75WL are conducted in film mode, which offers the best picture settings but also has its flaws. The biggest issue with the X75WL Sony is the white balance – for both HD and 4K HDR content – which is characterised by a dominance of blue. As a result, the entire image feels too cool. The colour checker confirms these errors, showing that colours lean towards cooler shades. Regarding brightness characteristics, the contrast gamma is at quite a decent level; however, the same cannot be said for the EOTF curve. There are significant issues with maintaining the appropriate brightness – the image is either too bright or too dim, which affects the visual perception of the content.

Philips PML9009, like most leading manufacturers, has been providing advanced tools for calibration processes for years. Here we find 2-point and 20-point greyscale adjustments, as well as an advanced CMS (Color Management System). The differences resulting from calibration are evident, and even someone who doesn't pay attention to image quality (although there probably aren't many like that here) will notice the positive difference. Both SDR and HDR materials have undergone quite a transformation. The former and the latter have primarily shed the ugly yellow tint resulting from the red colour dominance in white balance. As for the SDR materials and gamma, although it is not perfectly modelled and still loses dark details, the rest of it is at more than a decent level, and minor errors will not be noticeable. The colours themselves look far better, and with low deltaE errors, they are almost reference-quality. On the other hand, HDR materials, due to the unit's low luminance, have not been optimised as we would have liked. Although the white balance has been largely normalised, a slight blue tint can still be observed here and there. Fortunately, the EOTF curve turned out to be much more accessible, allowing for practically perfect geometry. Unfortunately, due to the screen's too low brightness, the colour errors remain quite high.

X75WL Sony is one of those cases where image calibration may not be heavily spectacular, but it provides a very good improvement in colour perception. The white balance, both for HD and 4K materials, has been significantly improved – we no longer have a strong dominance of cooler shades. The gamma curve also appears more stable, which translates to better image quality. However, the biggest issue remains the EOTF curve, which is responsible for brightness in 4K materials. Due to the technological limitations of the television (IPS panel and lack of local dimming technology), it's hard to talk about significant improvement, as we can't squeeze more out of this model. Despite these limitations, the tonality of the image has been significantly improved.

Judging by how PML9009 Philips handled tonal transitions, the image scaling test should perform just as well. This time, we are checking the TV’s algorithms responsible for enhancing the quality of images that were recorded in lower quality. Such images can be found, for example, in various TV shows or older films. In this regard, Philips PML9009 performs quite mediocrely and drastically blurs the image. This is particularly noticeable on fine branches or the model's hair.

Let’s revisit the issue of tonal transitions, which performed remarkably well. Within the unit, we will find several levels of smoothing. Even the lowest one can effectively eliminate any jerky tonal transitions and will be suitable for the vast majority of materials. More importantly, none of the settings for this function soften the effect of film grain, which is extremely important in terms of alignment with the director's vision. However, we would like to point out that sometimes it may turn out that fine details are blurred.

In the case of low-quality tonal transitions, the Sony X75WL television performs poorly. The lack of any feature to improve tonal transitions results in noticeable imperfections in colour gradation. However, it can be noted that the digital processing is quite good – the image is displayed without overscan, and the overall presentation is relatively good thanks to the added slight sharpness, which some users may appreciate.

Philips PML9009 has been equipped with a panel that has a native refresh rate of 120 Hz. This is the essential minimum for watching all kinds of sports and is recommended for comfortable gaming in favourite titles on consoles or PCs. The manufacturer, for those who dislike the characteristic judder of footage recorded at 24 fps or those requiring a high degree of motion smoothness, such as when watching football matches, has prepared an effective system for improving the sharpness of moving images. In the dedicated tab, we will find a "Smoothness" slider responsible for eliminating judder and a "Motion Blur Reduction" setting that helps to increase the sharpness of dynamic elements. The function works very well and granularly, meaning each setting has a real impact on motion perception. With such a set, every user will find their sweet spot. In the picture, we present our choice, which is slight smoothing without the soap opera effect.

A matter directly related to motion is the response time of the pixels in the panel itself. The best in this regard are of course OLED panels, followed by units based on IPS and ADS screens, and lastly VA. Despite the generally good quality of the systems responsible for smoothening the image, the use of a VA panel carries consequences in the form of black smear behind fast-moving objects. Although in the tested television this should not occur frequently, it will be noticeable here and there.

The X75WL Sony television features a 60 Hz panel, making it more suitable for watching movies than for fast-paced gaming. This model includes a motion smoother called Motionflow, which allows the user to adjust the picture on a 10-point scale. Smoothness adds intermediate frames, thus increasing motion fluidity, and the image becomes more theatrical while minimising the judder effect. Clarity reduces motion blur, which is especially useful during fast-paced scenes, such as sports or dynamic action in films. With this feature, the user can tailor the fluidity and sharpness of motion to their own preferences.

Philips PML9009, equipped with HDMI 2.1 connections with full bandwidth, supports all functions dedicated to gamers. The most basic ones, such as VRR and ALLM, are a given, but G-Sync, FreeSync, or playing in HDR Dolby Vision with low input lag are not. These features activate without any problems, and during the tests conducted, they presented no obstacles. Such preparation of the television is certainly its strong point, and it can be said that it is a unit dedicated to gamers. For more advanced users, we also mention that the PML9009 is equipped with the HGIG mode, which will be particularly felt by gamers, as there are still relatively few games that support Dolby Vision. This mode primarily allows for the adjustment of HDR effects to the capabilities of the television on a special board, to prevent dimming and burning of the image.

The television additionally implements a special menu - GameBar. This allows for editing unit settings "on the fly," meaning without having to exit the game. In it, we will also find functions such as activating a crosshair or black level correction for better visibility of opponents in shadows.

In a brief summary of this paragraph, the Philips PML9009 is a unit that will undoubtedly attract gamers' attention. Thanks to its versatility, it will allow for playing any title in the highest quality without compromises. Especially since features such as VRR, ALLM, G-Sync, FreeSync, or gameplay in HDR Dolby Vision will provide an even greater immersion in the favourite title.

X75WL is not the best TV for gamers. It only has the ALLM (Auto Low Latency Mode) feature and a basic Game Bar, which are not sufficient to satisfy more demanding users. In this price range, one would expect support for features such as VRR or 120 Hz refresh rates – although in FULLHD, which are already standard – unfortunately, they are lacking here. This is a big downside for Sony, as the competition offers much more for gamers in a similar budget.