Philips PML9009 / 9019 / 9059 vs LG OLED C4

Philips PML9009 doesn't really operate at the highest values in HDR materials. Most effects with brightness around 550 nits won't leave us thrilled with the lighting effects, although they are quite stable, which is a plus, and a considerable difference can be felt between SDR materials. It's worth noting that we can achieve a good result only in one scenario, that is in the film "Gemini," where the flashlight as the sole light source can really shine. Why in this scene? The answer is quite simple. The scene itself doesn't have a large amount of black, and the flashlight isn't as large an object as the sun in the first and last scenes. Overall, the brightness measurement results in HDR materials aren't a solid basis for recommending this television for viewing productions that use a wide color gamut. However, it's worth mentioning that this model can cover it in a not too bad 93% degree in the case of the DCI-P3 palette.

The results of HDR materials are definitely among the better ones. Practically every film significantly exceeds the 700 nits barrier, which allows for a very realistic image. Of course, none of them surpasses the magical thousand, however, the combination of such results along with unlimited contrast and black effectively boosts the visual outcome. The last of the scenes, featuring a fullscreen sun burst, is indeed less bright than the others, although it still represents a respectable level. It's also worth mentioning the excellent coverage of the DCI-P3 colour palette, which will enable the achievement of exceptionally vivid colours.

The best factory mode used during our tests was "Filmmaker". Here, we will examine both SDR and HDR content. The key differentiator is primarily the EOTF curve in the wide colour gamut materials and gamma in those recorded "the old way". Starting with SDR films and series and the most basic thing we can observe, which is white balance, we see a significant red colour dominance. This led to a yellow tint across the whole image, causing unnaturally looking faces and yellowed whites. This issue is also clearly visible on the "ColourChecker" palette, where all colours have shifted towards their warmer counterparts. Looking at an even more significant graph, the gamma responsible for the contrast of the image, we see considerable errors beginning right from the start. From the left, the value we measured, indicated by a combined ellipsis, clearly spiked upwards, causing complete merging of details in the darkest scenes. This state of affairs persisted up to 10% brightness on the screen, after which it dove below the reference orange line, leading to a deterioration in contrast, which, as we know, Philips PML9009 is already lacking. In HDR materials, white balance issues were very similar to those in SDR content. The discrepancy appears when checking the EOTF curve, which governs the rate of brightness increase and severely limited it, resulting in an unnaturally dark image. As for the colours themselves, there were more reasons for concern here, as the television's low luminance caused a huge disparity between the actual state and the correct one, which is perfectly visible on the error graph, often exceeding the scale.

The best factory mode implemented in the tested television was "Filmmaker". That was the one we used during all tests. This mode, in terms of colour reproduction, turned out to be quite decent, although other flaws effectively detracted from the enjoyment of the viewing experience. Starting with the most basic one, which is white balance, it was easy to notice that this was marked by a dominance of red, which completely altered the characteristics of the picture. We could see a strong yellowing of the whites and a shift of all colours to warmer tones. The gamma, which is a graph as equally important, if not more so, was quite severely reduced, resulting in a significant drop in contrast, except for the start of the graph, where the television insidiously lost details. That’s all regarding SDR materials. Looking closely at films with a wide dynamic range, we can observe exactly the same phenomenon of white balance yellowing as in films with a standard colour palette. The EOTF curve, which replaces the gamma chart for us, is practically perfect and cannot be faulted.

Philips PML9009, like most leading manufacturers, has been providing advanced tools for calibration processes for years. Here we find 2-point and 20-point greyscale adjustments, as well as an advanced CMS (Color Management System). The differences resulting from calibration are evident, and even someone who doesn't pay attention to image quality (although there probably aren't many like that here) will notice the positive difference. Both SDR and HDR materials have undergone quite a transformation. The former and the latter have primarily shed the ugly yellow tint resulting from the red colour dominance in white balance. As for the SDR materials and gamma, although it is not perfectly modelled and still loses dark details, the rest of it is at more than a decent level, and minor errors will not be noticeable. The colours themselves look far better, and with low deltaE errors, they are almost reference-quality. On the other hand, HDR materials, due to the unit's low luminance, have not been optimised as we would have liked. Although the white balance has been largely normalised, a slight blue tint can still be observed here and there. Fortunately, the EOTF curve turned out to be much more accessible, allowing for practically perfect geometry. Unfortunately, due to the screen's too low brightness, the colour errors remain quite high.

As we mentioned earlier, LG televisions are equipped with advanced tools for carrying out the calibration process. We used them to model the picture in line with what the director envisioned. And without modesty, we must admit that we achieved this phenomenally. Both SDR and HDR materials present a level that clearly indicates this is how a film should look. It's worth taking a look at the colour errors on the "ColorChecker" palette, where practically none of them exceed "1", except for two samples.

Judging by how PML9009 Philips handled tonal transitions, the image scaling test should perform just as well. This time, we are checking the TV’s algorithms responsible for enhancing the quality of images that were recorded in lower quality. Such images can be found, for example, in various TV shows or older films. In this regard, Philips PML9009 performs quite mediocrely and drastically blurs the image. This is particularly noticeable on fine branches or the model's hair.

Let’s revisit the issue of tonal transitions, which performed remarkably well. Within the unit, we will find several levels of smoothing. Even the lowest one can effectively eliminate any jerky tonal transitions and will be suitable for the vast majority of materials. More importantly, none of the settings for this function soften the effect of film grain, which is extremely important in terms of alignment with the director's vision. However, we would like to point out that sometimes it may turn out that fine details are blurred.

Once again, we will take a look at the feature responsible for gentle gradation, but we will also address the one that aims to enhance the quality of lower-quality materials. The default smoothing of tonal transitions, as we could see, was not the worst, but it can be improved further. The function has a slider that allows us to adjust its intensity. We recommend using the former, as it produces very good results and does not blur important details.

Image scaling on LG C4 is quite good, however, it cannot be said to be without flaws. The image is slightly sharper by default, although not in a very noticeable way. While jagged edges of trees can be seen, it is not a major issue when compared to other manufacturers.

Philips PML9009 has been equipped with a panel that has a native refresh rate of 120 Hz. This is the essential minimum for watching all kinds of sports and is recommended for comfortable gaming in favourite titles on consoles or PCs. The manufacturer, for those who dislike the characteristic judder of footage recorded at 24 fps or those requiring a high degree of motion smoothness, such as when watching football matches, has prepared an effective system for improving the sharpness of moving images. In the dedicated tab, we will find a "Smoothness" slider responsible for eliminating judder and a "Motion Blur Reduction" setting that helps to increase the sharpness of dynamic elements. The function works very well and granularly, meaning each setting has a real impact on motion perception. With such a set, every user will find their sweet spot. In the picture, we present our choice, which is slight smoothing without the soap opera effect.

A matter directly related to motion is the response time of the pixels in the panel itself. The best in this regard are of course OLED panels, followed by units based on IPS and ADS screens, and lastly VA. Despite the generally good quality of the systems responsible for smoothening the image, the use of a VA panel carries consequences in the form of black smear behind fast-moving objects. Although in the tested television this should not occur frequently, it will be noticeable here and there.

The maximum refresh rate we can set on the LG G4 is 144 Hz. Naturally, this is only possible when connecting the TV to a very powerful PC. Otherwise, we will operate at a maximum refresh rate of 120 Hz, which is recommended if we primarily want to watch sports or content with a lot of motion dynamics. For those who require high fluidity of the image, the manufacturer has implemented a multi-level motion smoother called "TrueMotion". It has been divided into two separate sliders that adjust the sharpness of moving images (De-Blur) and judder (De-Judder). Both sliders can be set in the range of 0 to 10, with each degree affecting the level of smoothing, allowing everyone to find their sweet spot.

The panel of the LG OLED C4 features an average response time of less than 1 ms (which directly results from our measurements), enabling the achievement of an extremely clear image, unattainable for LCD TVs, which can have response times of up to several milliseconds. This is clearly evident in the images from the "UFO Test," which show no trailing blur behind the object.

Philips PML9009, equipped with HDMI 2.1 connections with full bandwidth, supports all functions dedicated to gamers. The most basic ones, such as VRR and ALLM, are a given, but G-Sync, FreeSync, or playing in HDR Dolby Vision with low input lag are not. These features activate without any problems, and during the tests conducted, they presented no obstacles. Such preparation of the television is certainly its strong point, and it can be said that it is a unit dedicated to gamers. For more advanced users, we also mention that the PML9009 is equipped with the HGIG mode, which will be particularly felt by gamers, as there are still relatively few games that support Dolby Vision. This mode primarily allows for the adjustment of HDR effects to the capabilities of the television on a special board, to prevent dimming and burning of the image.

The television additionally implements a special menu - GameBar. This allows for editing unit settings "on the fly," meaning without having to exit the game. In it, we will also find functions such as activating a crosshair or black level correction for better visibility of opponents in shadows.

In a brief summary of this paragraph, the Philips PML9009 is a unit that will undoubtedly attract gamers' attention. Thanks to its versatility, it will allow for playing any title in the highest quality without compromises. Especially since features such as VRR, ALLM, G-Sync, FreeSync, or gameplay in HDR Dolby Vision will provide an even greater immersion in the favourite title.

We can now say that LG C4, like practically every OLED television from the manufacturer, is exceptionally good in terms of cooperation with consoles and PCs. Thanks to the implementation of four full-bandwidth HDMI 2.1 ports at 48 Gbps, the manufacturer has embedded all the features that enhance gaming comfort, including simultaneous support for FreeSync and G-Sync technologies. With such a tandem, players with graphics cards from AMD or nVidia can safely choose C4. However, what should please gamers demanding the highest possible quality the most is the simultaneous implementation of HDR Dolby Vision and HGIG mode. The former is particularly important as it operates with extremely low input lag in all settings.

A standard feature in televisions from the Korean manufacturer is also the implementation of GameBar, allowing for quick adjustments of settings "on the fly," without the need to exit the game. It also allows for image adjustments for people with visual impairments, which is an incredibly nice touch. Another important piece of information is that when VRR technology is enabled, we won’t experience a drop in contrast. This is, of course, due to the design of the panel and the absence of conventional backlighting. It is, however, normal for shades of grey to flicker slightly, although this is a characteristic feature of this function regardless of the manufacturer and television.

In summary: LG C4, just like all the manufacturer's OLEDs equipped with high-refresh-rate panels and HDMI 2.1 connections, creates a harmonious whole with consoles. In practice, it is a complete television, and if we expect the highest possible efficiency in gaming, C4 will be an ideal choice.