Philips PML8709 vs Philips PUS7000

Looking at the contrast results, we expected that the algorithms responsible for the zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is difficult to explain. The average brightness we managed to achieve was just 350 nits, which is definitely too low to fully enjoy HDR effects. In practice, the TV barely stands out compared to an average SDR. The situation becomes even more surprising in test scenes, such as the second one from the movie Life of Pi or Sicario 2. Small light elements achieve just 120 nits there, making them practically imperceptible. Such a level of brightness is completely below modern HDR standards and significantly diminishes the experience of watching high-quality content. The only bright spot in this category is the very good coverage of wide color gamuts – DCI-P3 at 97% and BT.2020 at 83%. This ensures that colors are saturated and well-reproduced, which can somewhat improve the overall experience of watching HDR materials. However, the lack of adequate brightness means that even this cannot save the Philips PML8709 in this category.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Though theoretically the Filmmaker mode in the Philips PML8709 should provide natural colour reproduction, in reality it resembles a store mode more. In the white balance, both for HD and 4K content, there is a clear dominance of blue. This causes the image to appear washed out and cold, which is particularly noticeable in the comparative image below.

The brightness characteristics also leave much to be desired. Both gamma and the EOTF curve exhibit excessive screen brightness. As a result, there is a loss of detail in both the brighter and darker areas of the image, further diminishing its credibility and naturalness. Bright elements appear unnaturally flat and little varied.

These significant issues with white balance and brightness characteristics lead to noticeable errors in colour reproduction, which can easily be seen in films as well as the Colour Checker test. The colours are inaccurate, affecting the overall image quality and visual experience. The factory settings require significant improvement in order to fully enjoy the potential of this television.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilise. The results? Although we managed to improve many aspects, it wasn't without difficulties. White balance was one of the biggest challenges – despite our efforts, it could be called fighting against windmills. We were able to significantly correct it, so the picture now looks much better than in the factory settings, but it is still far from perfect. Especially in some scenes, a subtle dominance of blue is visible, although not as intense as before. We achieved a significant improvement in brightness characteristics – gamma now appears much more stable. The EOTF curve looks correct at first glance, however, when analysing movie content, it is evident that the television has trouble maintaining the proper characteristics. The algorithms are "struggling", trying to adjust brightness, which may be due to the limited number of dimming zones that do not always handle more complex scenes well. Overall, the picture after calibration looks much more pleasing to the eye – colors are more natural, and colour reproduction errors have been minimised. Although it is still not perfect, the Philips PML8709 now presents itself much better than in the factory settings.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

The distortion reduction feature in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" - at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, meaning that certain tonal transitions may still appear somewhat uneven. An additional drawback is that this feature also smooths other details, such as the textures of materials like shirts, which can affect image sharpness.

As for image scaling, the television performs very well. The image appears smooth and free of noticeable "jaggies". This effect may appeal to many users, although some might prefer a more vivid look. Fortunately, the television allows for adjustment of the sharpness parameter, enabling us to tailor the image to individual preferences.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

Philips PML8709 is one of the few models with mini-LED technology on the market, offering a refresh rate of 60 Hz. While it’s not a panel for the most demanding gamers, it should satisfy those who mainly watch movies. The TV is equipped with a “Motion Style” feature, which is a motion smoother that allows you to adjust the fluidity of motion according to your preferences – from a more “plastic” look to a cinematic aesthetic with clearly visible frames.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

Philips PML8709 is a television aimed more at casual gamers, mainly due to the 60 Hz panel, which won’t meet the expectations of the most demanding users. However, for those who appreciate gaming at a more moderate pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help in providing smoother image display without annoying stutters. Furthermore, in terms of HDR, we find the implementation of HGiG, which adjusts the HDR effect to the specifics of games, ensuring a more natural image in appropriately optimised titles. Unfortunately, there is no support for Dolby Vision mode, which may be noticeable in games that utilise this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick previewing and modification of the most important settings related to gaming. It’s a simple but useful touch, especially for those who frequently change their configuration between different types of gameplay. Despite some limitations, the Philips PML8709 offers a solid set of features for less demanding gamers.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.