Philips OLED909 vs SONY BRAVIA 3 II (XR35M2)

Philips OLED909 impresses with its HDR effect quality, achieving up to 1500 nits of peak brightness in tested scenes. This is an excellent result, placing this television among the best OLED models on the market. The MLA panel, also used in models like the Panasonic Z95A and LG G4, plays a crucial role here, allowing for exceptionally bright and detailed reproduction of dynamic scenes. However, it is worth noting that in the most demanding scene from the film The Meg, brightness drops to around 700 nits. This is a typical phenomenon in OLED technology, where intensely bright full-screen images cause a reduction in luminance. Nevertheless, the HDR effect still looks very good, and the television performs better than most competitors under similar conditions. The wide colour gamut coverage also deserves praise. The OLED909 offers 95% coverage of DCI-P3, ensuring that the television guarantees the ability to display vibrant and realistic colours.

The Bravia 3 II isn't exactly a TV that tries to impress with brightness. In our measurements it reached around 450 nits, so it's well short of the brightest models on the market. That doesn't mean HDR is just a paper feature here. Compared with standard SDR material, the brightest parts of the image can already punch through noticeably, and highlights, light sources and stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where the screen contains lots of bright elements. Then the Bravia 3 II can give a taste of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of bold, spectacular HDR we’re left with a merely competent picture.

Colours

The Bravia 3 II uses a QLED panel, although technically it doesn't employ a traditional quantum-dot layer. Instead Sony has used a PFS phosphor-based solution, which performs a very similar role: it allows for more saturated reds and greens, and thus reproduces a much wider colour gamut. In our measurements coverage of the DCI-P3 gamut was about 94%, and of the very wide BT.2020 around 74.4%. Those are good results for this class of hardware, which means the Bravia 3 II has no problem showing suitably saturated colours in HDR material. Colours don't look washed out, and the more intense hues can look really attractive.

Like other TVs, the Philips OLED909 has been tested for colour reproduction in factory modes. The best mode was found to be Filmmaker Mode; however, despite its name, it is not without faults.

The biggest problem is the white balance. In both HD and 4K HDR content, there is a noticeable dominance of green and red hues, resulting in a clear yellow tint on the screen. This effect is particularly visible in test materials, for example, in a scene with Tom Cruise in the foreground, where the difference compared to a calibrated image is very clear.

As for the brightness characteristic, in HD materials, the gamma was excessively boosted - it was below the reference value of 2.4, giving the image a “milky” filter and impacting overall clarity. For 4K HDR content, we observed the opposite phenomenon – at the beginning of the EOTF curve, there is a noticeable drop, indicating issues with reproducing the smallest details in dark scenes. Although Filmmaker mode offers acceptable quality, noticeable errors in white balance and brightness characteristics show that the TV requires additional calibration to fully realise its potential in colour reproduction.

In Professional mode the Bravia 3 II delivers a fairly good level of colour reproduction straight out of the box. In SDR the most noticeable issue is a slightly low gamma, which makes the midtones a little brighter. The white balance isn't perfect either; as brightness increases a bit of blue and red drops away, so whites can sometimes appear a touch warmer with a faint greenish tint. These aren't mistakes that immediately jump out when watching a film. Average error values hover around 3, so the factory setup can be considered quite good. The situation in HDR is similar. Here too there's a slight lack of blue, so the picture is marginally warmer than the reference, but the difference isn't large enough to be distracting during normal viewing.

Philips OLED909 offers tools for image calibration, significantly improving its quality. After calibrating the Filmmaker Mode, the television displays a much more natural colour reproduction. The white balance after calibration looks very good. Although we noticed slight blue tint deviations in HD content, the errors fall within acceptable limits, and the picture is significantly better than in factory settings. The brightness characteristics, including gamma and EOTF, have also been clearly improved. The television no longer has issues with excessive brightening or dimming of the image. Both dark and light details are now rendered correctly, making the picture look very good in every scene. After calibration, Filmmaker Mode on the Philips OLED909 offers excellent picture quality that will meet the expectations of even the more demanding users. The calibration fully utilises the potential of this model.

After calibration you can get a lot out of SDR material. The white balance was set almost perfectly, gamma practically matches the reference value, and average colour errors fell from around 3 to about 1. That’s already the level at which differences from the reference image are very hard to spot in practice. The Bravia 3 II therefore shows that despite its place in Sony’s range it has quite a bit of potential for precise picture tuning. Improvement is also visible in HDR, although here you can’t avoid all the limitations of the TV itself. Once the colours are evened out it’s easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II gently darkens parts of the image. That isn’t ideal from a reference point of view, but in this particular TV it also has an advantage. With no local dimming and average black levels this behaviour slightly reduces the visibility of the backlight in darker scenes and helps preserve a stronger sense of contrast. You could say Sony is partly masking the limitations of the panel this way, rather than trying at all costs to stick to the reference brightness.

Philips OLED909 offers a distortion reduction feature designed to smooth tonal transitions. Unfortunately, the effectiveness of this feature leaves much to be desired. Setting it to "Medium" achieves some effects, but it comes with the risk of blurring important details in the image. For this reason, we do not recommend using this option unless you are looking to soften visible artifacts at the expense of detail.

As for image scaling, the TV presents a very pliable image, which may appeal to viewers who prefer a softer picture. Those expecting sharper clarity will also find a solution, as image scaling can be adjusted to individual preferences in the settings.

Bravia 3 II is Sony's first TV to use the new MediaTek Pentonic 800 chip, and you can see a few changes in the image processing. Starting with the basics: the upscaling itself is decent. The TV can sensibly upscale lower-resolution material and doesn't have a strong tendency to over‑emphasise jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming material the picture therefore remains quite attractive.

We have more reservations about the digital image processing. In this model Sony has replaced the well-known "Smooth Gradation" function with a new setting called "Digital Noise Reduction". Its job is basically the same: to smooth out ugly tonal transitions and artifacts caused by heavy compression. Unfortunately, this function performs noticeably worse than before. At the "Large" setting (the only one that had any visible effect) the TV can smooth away too many image elements at once, which causes film grain to disappear and object textures or even skin to start looking unnatural. Worse still, the effect is not particularly stable. When there's more motion in a scene, the function's effect noticeably weakens and at times it looks as if the TV stops intervening in the image altogether. So for everyday viewing we wouldn't recommend using it at a high level. It can help on static shots, but the trade-off is often too much loss of detail.

The Philips OLED909 with a 144 Hz panel offers excellent image fluidity, which should satisfy both movie lovers and gamers. Additionally, the TV is equipped with a motion smoothing feature called "Motion Style," which allows for precise adjustment of image fluidity according to personal preferences. In the settings, we find two sliders: "Fluidity," which adjusts the smoothness of motion in films, and "Motion Blur Reduction," which helps eliminate minor artifacts and distortions in dynamic scenes. This feature works well, ensuring that even quick movements on the screen are clear and readable.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Sony has, however, managed that issue very well here. Fast-moving objects remain sharp, and the characteristic motion trails and blur are reduced to a very low level, if not to zero. It's one of the least motion-blur-prone LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series, the Bravia 9 II.

Philips OLED909 is a TV that meets practically all the requirements of gamers. Equipped with ALLM (automatic low latency mode), VRR (variable refresh rate), and support for Dolby Vision, it guarantees an excellent gaming experience. Additionally, the TV offers very low input lag, ensuring that the response to player movements is instantaneous, which fans of dynamic games will particularly appreciate.

The TV effortlessly supports any resolution at 120 Hz, and even higher refresh rates. The HGiG function, responsible for correctly displaying HDR content in games, works as it should, making the picture in game mode balanced and aligned with console manufacturers' guidelines.

The OLED909 is also equipped with a Game Bar feature, which allows for quick preview and adjustment of gaming settings. Although the interface of this solution seems less visually appealing than that of competitors, it serves its purpose by offering all the essential options in one place.

The Sony Bravia 3 II is a very good TV for gamers, although not everything has been solved the way we’d like. The biggest change concerns the connectors. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the problems that has hung over this manufacturer’s TVs for years. You can connect several devices at once and on each input use the device’s full capabilities, including VRR and ALLM. There’s also a simple Game Bar that lets you check the key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. That won’t be an issue for everyone, but people using that resolution on a console or PC—for example to get higher frame rates in certain games—will have to choose 1080p. We have more reservations about HGiG support. Sony doesn’t let you disable tone mapping on the Bravia 3 II, so the TV keeps processing HDR even when you’d prefer to leave that task to the console. It’s easiest to spot during HDR setup—the checkerboard test pattern doesn’t disappear at the point where it should based on the TV’s actual capabilities. That doesn’t mean HDR in games will look bad. You just need to set up a little differently and, rather than relying on the pattern, manually set the peak brightness to about 450 nits. So the issue can be worked around, but you should know about it before you start configuring your console.