Philips OLED909 vs LG OLED C6 (WOLED)

Philips OLED909 impresses with its HDR effect quality, achieving up to 1500 nits of peak brightness in tested scenes. This is an excellent result, placing this television among the best OLED models on the market. The MLA panel, also used in models like the Panasonic Z95A and LG G4, plays a crucial role here, allowing for exceptionally bright and detailed reproduction of dynamic scenes. However, it is worth noting that in the most demanding scene from the film The Meg, brightness drops to around 700 nits. This is a typical phenomenon in OLED technology, where intensely bright full-screen images cause a reduction in luminance. Nevertheless, the HDR effect still looks very good, and the television performs better than most competitors under similar conditions. The wide colour gamut coverage also deserves praise. The OLED909 offers 95% coverage of DCI-P3, ensuring that the television guarantees the ability to display vibrant and realistic colours.

The HDR performance of the LG C6 is really very good. LG Display’s new WOLED panel has mainly brought a significant increase in brightness. In our unit we measured around 1500 nits and, importantly, the TV can show similar values in many normal movie scenes as well. That gives HDR real punch. Bright highlights, lamps and sunlight can be genuinely intense, and most HDR movies simply look very impressive. Of course it’s still an OLED, so brightness falls in scenes with a lot of white. The fifth scene from the movie The Meg illustrates this well, where the C6 reached around 600 to 700 nits. That’s still a very good result, but it also shows the new panel hasn’t shed all the limitations typical of OLEDs.

Colours

When it comes to colours, it’s also hard to raise major objections. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice colours are very saturated and, importantly, stable regardless of the scene. That’s worth emphasising, because not every TV behaves the same in this respect. In some RGB Mini LED models colour saturation can depend more strongly on image brightness. A wider colour gamut today is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to produce suitably saturated colours in most movie scenes.

Like other TVs, the Philips OLED909 has been tested for colour reproduction in factory modes. The best mode was found to be Filmmaker Mode; however, despite its name, it is not without faults.

The biggest problem is the white balance. In both HD and 4K HDR content, there is a noticeable dominance of green and red hues, resulting in a clear yellow tint on the screen. This effect is particularly visible in test materials, for example, in a scene with Tom Cruise in the foreground, where the difference compared to a calibrated image is very clear.

As for the brightness characteristic, in HD materials, the gamma was excessively boosted - it was below the reference value of 2.4, giving the image a “milky” filter and impacting overall clarity. For 4K HDR content, we observed the opposite phenomenon – at the beginning of the EOTF curve, there is a noticeable drop, indicating issues with reproducing the smallest details in dark scenes. Although Filmmaker mode offers acceptable quality, noticeable errors in white balance and brightness characteristics show that the TV requires additional calibration to fully realise its potential in colour reproduction.

Right out of the box the LG C6 is quite well set up, especially if you choose the Filmmaker mode. In SDR material the white balance is decent, although as brightness increases there is a slight lack of red. The image becomes a bit cooler, but not enough for it to be very noticeable during normal viewing. More is happening in the brightness characteristic. Gamma is a little low and instead of holding at 2.4, for a large part of the range it sits closer to 2.1–2.2. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a darkened room.

In HDR the situation is a bit more interesting. The start of the greyscale looks very good, but from about 20–30% brightness the white balance starts to drift increasingly. As brightness rises there is more red and a noticeable lack of blue. In the brightest sections the difference is already significant and also affects the reproduction of some colours. The EOTF curve itself is followed quite well through most of the range. The C6 only tends to slightly brighten the image, which we also saw in our film comparisons. The largest deviation appears around the brightest parts, where the TV starts adapting the signal to the panel's capabilities.

The factory Filmmaker setting in HDR is therefore not perfect, but overall performs well. The biggest area for improvement is the white balance, especially at high brightness.

Philips OLED909 offers tools for image calibration, significantly improving its quality. After calibrating the Filmmaker Mode, the television displays a much more natural colour reproduction. The white balance after calibration looks very good. Although we noticed slight blue tint deviations in HD content, the errors fall within acceptable limits, and the picture is significantly better than in factory settings. The brightness characteristics, including gamma and EOTF, have also been clearly improved. The television no longer has issues with excessive brightening or dimming of the image. Both dark and light details are now rendered correctly, making the picture look very good in every scene. After calibration, Filmmaker Mode on the Philips OLED909 offers excellent picture quality that will meet the expectations of even the more demanding users. The calibration fully utilises the potential of this model.

LG TVs have long responded very well to calibration, and the C6 is no exception. After adjustments we managed to set the white balance practically perfectly, and most colour errors fell below 3, often down to around 2. In practice this means very accurate colour reproduction in both SDR and HDR. An interesting detail only appeared with the HDR brightness response. On a classic EOTF chart everything looks almost perfect and at first glance it would be hard to find fault. Only when we measured the TV’s behaviour using filters based on real film scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many viewers may even see it as a positive, because HDR looks a bit more striking as a result. From the point of view of fidelity to the source material, however, it’s not ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is rather unusual for LG. In previous generations the brand’s TVs typically held very closely to the reference picture curve after calibration. The C6 is still very close to the standard, but that subtle brightness 'boost' can indeed be noticed in films and TV series.

Philips OLED909 offers a distortion reduction feature designed to smooth tonal transitions. Unfortunately, the effectiveness of this feature leaves much to be desired. Setting it to "Medium" achieves some effects, but it comes with the risk of blurring important details in the image. For this reason, we do not recommend using this option unless you are looking to soften visible artifacts at the expense of detail.

As for image scaling, the TV presents a very pliable image, which may appeal to viewers who prefer a softer picture. Those expecting sharper clarity will also find a solution, as image scaling can be adjusted to individual preferences in the settings.

Here the LG C6 has taken a really big step forward. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very close. That's a big plus, because in this area LG's processor this year performs excellently. The "Smooth Gradation" function works particularly well. With heavily compressed material it can effectively hide ugly tonal banding and artefacts that often appear, for example, in lower-quality streaming. It's best to leave it on the "Low" setting. Then the improvement is clear, and the TV doesn't yet start blurring fine detail. Higher levels smooth the image more aggressively, but can already remove some of the natural texture of objects on screen. Upscaling itself also performs very well. Lower-resolution content is properly sharpened, edges look clean, and the processor quite effectively reconstructs fine details. In that respect the C6 is really close to LG's best TVs and the differences compared with the G6 are small.

The Philips OLED909 with a 144 Hz panel offers excellent image fluidity, which should satisfy both movie lovers and gamers. Additionally, the TV is equipped with a motion smoothing feature called "Motion Style," which allows for precise adjustment of image fluidity according to personal preferences. In the settings, we find two sliders: "Fluidity," which adjusts the smoothness of motion in films, and "Motion Blur Reduction," which helps eliminate minor artifacts and distortions in dynamic scenes. This feature works well, ensuring that even quick movements on the screen are clear and readable.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sport and consoles we’ll of course be limited to 120 Hz at most, but even then it’s hard to fault the motion clarity. As you’d expect from an OLED, the panel’s response time is near-instant. Moving objects therefore don’t leave the characteristic smearing you still see on LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during dynamic movement.

For movies and TV, LG has also included a motion smoothing system called TruMotion. In the user settings you’ll find two separate sliders. De-Judder is primarily for low-frame-rate material, namely movies and TV series at 24 fps. You can use it to slightly reduce the characteristic judder or increase it if you prefer a much smoother picture. De-Blur, on the other hand, is useful for higher-frame-rate content, mainly sports broadcasts and 50/60 fps TV.

Philips OLED909 is a TV that meets practically all the requirements of gamers. Equipped with ALLM (automatic low latency mode), VRR (variable refresh rate), and support for Dolby Vision, it guarantees an excellent gaming experience. Additionally, the TV offers very low input lag, ensuring that the response to player movements is instantaneous, which fans of dynamic games will particularly appreciate.

The TV effortlessly supports any resolution at 120 Hz, and even higher refresh rates. The HGiG function, responsible for correctly displaying HDR content in games, works as it should, making the picture in game mode balanced and aligned with console manufacturers' guidelines.

The OLED909 is also equipped with a Game Bar feature, which allows for quick preview and adjustment of gaming settings. Although the interface of this solution seems less visually appealing than that of competitors, it serves its purpose by offering all the essential options in one place.

LG has long focused heavily on gamers, and the C6 essentially lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can even run at 165 Hz. On top of that there’s VRR from 40 to 165 Hz, ALLM and a properly functioning HGiG. Another big plus is support for Dolby Vision in games, so the Xbox Series X can use that format without giving up game mode. The package is rounded out by the Game Bar, which lets you quickly check key signal parameters and change settings without leaving your game. In terms of features alone, the C6 is one of those TVs it’s really hard to fault. Whether you play on PlayStation, Xbox or PC, practically everything you could expect from a modern gaming TV is available here.