Philips OLED820 vs Samsung The Frame Pro

When it comes to HDR quality, the Philips OLED820 uses the same class of WOLED panel found in its biggest rivals – the LG C5 and the Samsung S90F. This means we can expect really solid results. This year, mid-range OLED panels can exceed the threshold of a thousand nits, and the tested model reaches around 1300 nits in some films. This is an outstanding result, allowing the director's vision to be conveyed with incredible precision, as this is the brightness range in which modern productions are mastered. Of course, there are situations where even the OLED820 has to compromise. Full-screen scenes flooded with white, like those in the film The Meg, can drop brightness to 400–500 nits, which clearly diminishes the effect. This is a characteristic of OLED technology that has not yet been fully eliminated. Despite this limitation, it's hard not to appreciate the HDR in this model – high luminance and a wide coverage of the DCI-P3 colour palette at 99% make the image look simply fantastic.

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a decent result for a lifestyle model. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, the brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to local dim whole strips, does not handle them very well. It happens that small elements are overly darkened, which weakens the effect, or conversely – they become heavily brightened, but at the cost of losing black depth in that part of the image. This can be compared to light halos reminiscent of a laser beam spreading in dense fog – an effect that is visible and bright but at the same time not very natural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colours are saturated, and the reproduction of the DCI-P3 palette reaches over 92%. Generally, movies or series watched in HDR on The Frame Pro present a rich colour palette, even if contrast and the performance of the lighting algorithms can sometimes draw our attention away.

The colour reproduction in the factory settings really surprised us, and in a positive way. The Philips OLED820, switched to Filmmaker mode, immediately showed that it was quite well tuned in terms of colour. The white balance was relatively accurate, although there was a slight deficiency in the blue hue, which sometimes gave the image a slightly yellowish tint. However, this is not a drawback that particularly interferes with everyday viewing. A bigger problem arose with the brightness characteristics. The gamma chart clearly deviated from the ideal, as the line was below the expected values, causing the image to be excessively brightened, and the colours looked as if they were covered with a light milky filter. This effect was also noticeable in tests using the Colour Checker pattern, where more pronounced errors appeared.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the most commonly viewed materials – The Frame Pro performed really well. The white balance and gamma were almost perfectly set, making the image look natural and cohesive. Yes, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed up" character, but in everyday use, it didn't hinder the viewing experience too much. For HDR content, the situation was similar regarding the white balance. It was at a good level, however, the biggest issue turned out to be managing brightness. The EOTF curve was set in such a way that in many scenes the image appeared blown out, and the brightest areas lost detail and resulted in uniform patches of light. This severely affected realism and made colours appear very oversharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their TVs, so we opted for calibration and its results can be seen below.

After calibration, both the Filmmaker mode and the gaming mode improved quite a bit. A slight adjustment of the white balance and enhancement of the brightness characteristics yielded excellent results with SDR content – the image looked nearly perfect, natural, and very close to the reference. For HDR material, the situation was similar; the colours looked fantastic, and it was hard to find fault with anything. However, we did notice a certain characteristic, which we had already pointed out when comparing scenes from the film Billy Lynn. The analysis of the EOTF curve showed that the TV has a slight tendency to dim details in the blacks, meaning that the darkest parts are not always displayed exactly as the director intended. Nevertheless, the effect after calibration is superb, and the OLED820 is emerging as one of the more interesting screens in its class. A little bit of fine-tuning is all that’s needed, and there’s really nothing to worry about.

After calibration, the SDR mode looks almost perfect. We managed to eliminate the overly intense red saturation that previously gave the image a somewhat excessively warm character. The colours became more balanced, which translated into a natural and pleasant viewing experience for everyday content – from television to movies and series from streaming services or materials on YouTube. In HDR mode, the EOTF curve required the most work, as the factory settings caused excessive clipping of the entire image. The calibration significantly helped to "tame" this issue – the image stopped being overexposed, and details in the bright areas became more visible. Of course, the limits are set by the design of the television itself, as edge lighting reveals its limitations, and even the smallest elements of light can still appear overly bright or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is much more enjoyable to watch, and it is definitely worth considering if you want to make the most of the television's capabilities.

Fortunately, the earlier effects of the mentioned posterisation can be quite effectively mitigated. The "distortion reduction" feature set to medium handles unwanted colour banding well, improving the smoothness of tonal transitions. It does sometimes work a bit too aggressively and smooths out some details – such as the minor imperfections of the actors’ skin – but despite that, it can be considered worth using without major compromises. The upscaling in the OLED820 also performs well. The test image with the model is exceptionally soft, sometimes perhaps too much, although this can be remedied with a slight increase in sharpness in the picture menu – that's a matter of individual preference. The absence of overscan issues with very low-resolution content is also commendable, allowing us to not worry about the image being unnecessarily cropped.

Although in 4K HDR materials the fluidity of tonal transitions in the ChooseTV Pro is not a problem at all, naturally with weaker signal quality – such as with television, HD materials, or older Full HD films – imperfections may occur. Therefore, it's crucial how the television handles these limitations thanks to the image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a visible yet not overdone way. However, it's important to remember that Samsung has a tendency to be aggressive – even at the lowest level of this feature, it can "eat" film grain. So, it's wise to use it with caution and adjust the settings according to the material being watched.

The upscaling itself is of a high standard. The ChooseTV Pro effectively boosts older materials to a native 4K resolution, maintaining good sharpness and clarity. Movies and series in lower quality simply look better here. However, it's worth mentioning a minor downside – typical for many Samsung televisions. With very old sources in poor quality, you may notice some cropping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's good to know that it may occur.

Motion fluidity is an area where OLEDs always shine, and the Philips OLED820 confirms this rule. The panel itself offers a refresh rate of 144 Hz, which will mainly benefit PC gamers, but even with standard TV sources or consoles, where it operates at 120 Hz, motion is fast, sharp, and simultaneously smooth, without any signs of smearing. This is thanks to the remarkable response time between pixels, which ensures the image maintains clarity in every dynamic scene. The manufacturer has also added their own smoothness enhancer called "Motion Style." In the menu, we find two sliders – the first, responsible for smoothness, allows for the adjustment of the number of artificially added frames in films. This way, we can choose a raw, cinematic character with clearly visible film frames or a more theatrical image with smooth motion. The second slider is for motion blur reduction, particularly useful in sports broadcasts. Here, we definitely recommend setting it to the maximum value, as the effect is truly excellent.

The fluidity of movement in The Frame Pro is not only due to the panel itself, which operates at a refresh rate of up to 144 Hz, but also the image processor and motion smoothing system. It is thanks to this that we can adjust the way movies or sports broadcasts are displayed to our own preferences. Available are sliders for blur reduction and motion judder reduction – the first function enhances the sharpness of fast movements, while the second helps to soften the effect of the "jumping" image during camera pans. Everyone can choose between a cinematic character of motion and a smoother, more "television" style.

The Philips OLED820 is one of the most comprehensive TVs for gamers. Onboard, we find practically everything one could expect: two HDMI 2.1 ports with full bandwidth of 48 Gbps (shame there aren't four), Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM), support for Dolby Vision in games, and a good implementation of the HGiG mode. The TV also handles lower resolutions at 120 Hz without issue, so you can count on great flexibility when choosing different picture modes on your console. Philips also adds a Game Bar – a panel that allows you to change picture modes, add a crosshair, or preview parameters. Although it looks a bit clunky and is less refined than its competitors, it gets the job done. In practice, therefore, the OLED820, in addition to a full set of four HDMI 2.1 connections, offers almost everything a gamer could need.

Samsung The Frame Pro doesn’t pretend to be just a “living room” TV; gamers will also find something for themselves here. The manufacturer has ensured a full package of gaming features: we have support for variable refresh rate (VRR), auto low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on-the-fly – from refresh rates to active image processing modes. Are there downsides? Yes, The Frame Pro doesn’t support Dolby Vision in game mode, but it’s hard to consider this a serious issue – most gamers use HDR10 anyway... so the HGIG mode. Exactly. The biggest surprise was the latest software update. Samsung... completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user cannot enable settings designed with consoles in mind. This is a step backwards, which may disappoint more aware gamers hoping for full compliance with HGiG guidelines. We can only hope that this mistake will be quickly fixed.

An interesting feature of The Frame Pro is also the unusual placement of HDMI 2.1 ports. We have as many as five at our disposal – four are located in the One Connect module, and the fifth, in micro HDMI form, is located directly on the TV. This solution is quite unusual but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimises any potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond counts. We have written separately about input lag, but we can reveal here that by connecting the equipment directly to the TV, we get the absolute maximum response speed from it.