Philips OLED809/819 vs LG NANO81A / NANO80A

Philips OLED 809 delivers a more than satisfactory HDR effect. The television is capable of generating luminance exceeding 900 nits in almost every scene, and sometimes even over 1000. This result allows for a full experience of materials with a wide tonal range. The only moment when Philips OLED 809 cannot generate higher brightness is in a scene from the film "The Meg," which features a large amount of bright white across much of the screen. However, it cannot be said that this is a weak result, as it represents a significant improvement over its predecessor. Overall, such values for OLED panels produced by LG Display, which do not have MLA technology, are very, very good. Combined with high coverage of the DCI-P3 colour gamut, they allow for an HDR experience in a remarkable dimension. Philips OLED 809 test indicated that this television supports popular HDR formats such as Dolby Vision and HDR10+.

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

The best factory mode in which we conducted all our tests was "Filmmaker", which is now quite standard in televisions from this manufacturer. However, let's take a look at its characteristics before we start the calibration process. The first aspect we will examine is white balance, as despite being inconspicuous, it determines whether the image will be free from any tints. The graph clearly shows that in both SDR and HDR content, two colours dominated: red and green, which caused a strong yellow tint that was pervasive throughout the image. This is perfectly visible on the "ColourChecker" palette, where all colours shifted towards their warmer counterparts. The second thing we will scrutinise are, in our opinion, the two most important graphs in the context of image quality assessment: gamma and the EOTF curve. Both are intended to maintain appropriate brightness and contrast. The first describes the level of brightness in SDR materials, while the second depicts the rate of luminance increase. Analysing the first one, we can see that it has been remarkably lowered compared to the reference value indicated by the orange line. This situation resulted primarily in a sharp increase in brightness and a significant decrease in contrast, reminiscent of what one would expect from OLED televisions. The EOTF curve showed greater "caution" and only slightly brightened the entire image to 50% of the maximum brightness.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

Philips, like most leading manufacturers, has been providing advanced tools for the calibration process for years. Here, we find 2- and 20-point grey scale adjustments as well as an advanced CMS (Color Management System). As you can see, this has brought extremely beneficial results and fundamentally changed the perceived image. Practically every one of the elements mentioned above has undergone a transformation and has been returned to its natural state. This is particularly evident on the "ColourChecker" palette, where the measured samples are harmoniously in their places. It must be said that the white balance has turned out exceptionally well, allowing us to enjoy a clean image free from any tint in both SDR and HDR materials. The biggest issue with OLED809, which is gamma, has been properly modelled and only occasionally shows minor errors that won't affect the overall picture. The EOTF curve, on the other hand, has been stripped of that slight brightening and now presents itself almost referentially.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

Philips OLED 809 didn't perform too well in the test for the smoothness of tonal transitions. Moving on to the part of the test where we assess the behaviour of the TV's algorithms, we will again check the function responsible for removing posterisation. In fact, such a function exists in the menu and has several options available. As you can see in the photo on the left, although its presence has been confirmed by us, it is not useful. Only at the highest setting does it effectively remove disruptions, but it blurs the entire image in the process. Therefore, it is completely unusable.

Time and again, you and we find ourselves watching materials of lower quality. In this case, the quality of the image upscaling algorithms can have a salvaging effect. We must admit that those implemented in OLED 809 work quite efficiently and improve the image quality without visible artefacts. You can only notice slight edge blurring, but it is unlikely to be noticeable during normal viewing.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The maximum refresh rate we can set on the tested television is 144 Hz. This value can be achieved by connecting it to a really powerful PC. In the case of consoles or television, everything remains the same. For those who require high movement fluidity or dislike the characteristic judder of films recorded at 24 fps, the manufacturer has prepared a fairly advanced motion smoothing system. In the dedicated tab, we will find the “Smoothness” slider responsible for eliminating judder and “Blur Reduction”, which helps increase the sharpness of dynamic elements. The function works very well and granularly, meaning each of the settings has a real impact on the perception of motion. We also mention that it works at a refresh rate of 120 Hz, as it operates on the multiples of film or television materials. Thanks to such an extensive set, every user will find their happy medium. In the photo, we present our choice, which is slight smoothing without the soap opera effect.

Motion is influenced not only by the settings on the television but also by the response time of the panel itself. OLED televisions feature the best response time on the market, which in the case of 809 is about 0.1 ms. There are no IPS/ADS or even VA panels that significantly come close to the results of organic panels.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

The Philips OLED 809 supports all the technologies included in the HDMI 2.1 standard, and during our tests, each one activated without any problems. Therefore, we must state that this television is perfect for all gamers, both those using a console and a computer. It's worth mentioning that the manufacturer has implemented the HGIG mode, which is a great alternative to Dolby Vision, which unfortunately on the OLED809 is unplayable due to the very high input lag.

A nod to gamers is also the inclusion of a dedicated GameBar, which allows monitoring of current gameplay parameters and quick adjustments of settings. There is also a function to activate a crosshair, which will be very useful when shooting from a sniper rifle, but from the so-called hip. Additionally, we can also find a shadow enhancement function for better visibility in shadows and a colour filter for gamers with visual impairments.

In summary, the OLED 809 is a very good and versatile device for gamers. Anyone who purchases this television for gaming does not need to worry about anything, as it is simply designed for gaming. Especially since features such as VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision gameplay will allow for an even deeper immersion in their favourite title. Lastly, we should note that the only downside of the television in game mode is the artificial sharpening of the image, regardless of the settings, and it cannot be 'softened.'

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.